50 Caliber Racing CNC Billet Side Intake Grille Bezels for Polaris RZR...
Polaris Primary Drive Clutch part number 1323853 (supersedes 1323769)....
Brand New Polaris OEM Factory Replacement Intercooler, Polaris Part...
50 Caliber Racing Split Bench Seat for Polaris RZR XP1k Turbo 2 and 4...
Polaris rear axle half shaft, part number 1333944. This is a Genuine OEM...
Polaris rear axle half shaft, part number 1333439. This is a Genuine OEM...
Polaris front axle half shaft, part number 1333420. This is a Genuine...
Set of 16 chrome splined tapered lug nuts. Durable and attractive chrome...
Polaris front axle half shaft, part number 1333434. This is a Genuine...
50 Caliber Racing CNC Billet Air Intake Grille Bezels for Polaris RZR XP Turbo / Turbo S 2017-2020. Machined from solid 6061 aluminum with a durable powdercoat finish. Gives your RZR an aggressive, stylish look. Stainless steel hardware included for a quick and easy installation. Proudly made in the USA. Be sure to select color before ordering!
50 Caliber Racing CNC Billet Side Intake Grille Bezels for Polaris RZR XP 1000 2014-2018. Machined from solid 6061 aluminum with a durable powdercoat finish. Gives your RZR an aggressive, stylish look. Stainless steel hardware included for a quick and easy installation. Proudly made in the USA. Be sure to select color before ordering!
Brand New Polaris OEM Factory Replacement Intercooler, Polaris Part number 1240930. This is a Genuine OEM Polaris Part. There are many offshore aftermarket replacements available at a better price, but none of them can match the quality of Polaris OEM engine parts. Fits RZR XP Turbo and Pro Xp 2016-2021+.
If you race or drive aggressively, stock tie rods will not hold up. 50 Caliber Racing heavy duty, 1.125" (1 1/8") diameter rods are machined in the USA from solid 6061 CNC Billet aluminum. They are fitted with 5/8 inch heat treated 4130 Chromoly Heim joints and 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type...
Give your passengers something to hang on to! Add some handles and some style to your UTV or other off road vehicle. This 50 Caliber Racing grab handle will bolt on to any roll cage tube from 1.5" - 2" diameter, and can also be mounted to a flat surface. CNC machined from billet aluminum with decorative logo and design engraved. Easily bolts on to any...
Give your RZR a unique look with our custom CNC milled shift knob with 50 Caliber Racing logo. Designed to look like a 45mm anti-aircraft shell casing, each shifter handle is machined from solid billet aluminum for rugged looks and long lasting quality. Made in the USA. Be sure to select color before ordering!
50 Caliber Racing CNC Billet Air Intake Grille Bezels for Polaris RZR PRO XP. Machined from solid 6061 aluminum with a durable powdercoat finish. Gives your RZR an aggressive, stylish look. Stainless steel hardware included for a quick and easy installation. Proudly made in the USA. Be sure to select color before ordering!
Give your Wildcat a unique look with our custom CNC milled shift knob with 50 Caliber Racing engraved. Designed to look like a 45mm anti-aircraft shell casing, each shifter handle is machined from solid billet aluminum for rugged looks and long lasting quality. Made in the USA. Be sure to select color before ordering!
Looking for a place to add dash switches to your YXZ1000R? This beautiful CNC machined dash panel allows you to mount 4 carling style rocker switches, and includes an access hole so you can keep using the handy dash cubby. Designed, machined and finished in the USA by 50 Caliber Racing. Available in powder-coat or raw finish that will give your YXZ that...
Stock RZR Radius rods are light duty and frequently fail during aggressive driving, racing and jumping. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and bent and/or wallowed out frame mounting tabs. 50 Caliber Racing CNC radius rods completely solve this problem with massive heavy duty 1.25" billet rods, 4130...
50 Caliber Racing custom billet aluminum dash panels allow you to mount stock switches plus add 2 additional to the dashboard of your RZR 570, 800 & XP900 while keeping the cigarette lighter. CNC machined from 6061 billet aluminum and emblazoned with the 50 Caliber Racing logo. Choose raw silver or black powdercoat finish. Available as a panel only or...
50 Caliber Racing custom billet aluminum dash panels allow you to mount stock switches plus add 3 additional to the dashboard of your RZR 570, 800 & XP900. CNC machined from 6061 billet aluminum and emblazoned with the 50 Caliber Racing logo. Available in raw or powder-coat finish in one of several colors to match any color scheme. Made in the...
These beautiful CNC machined 6 switch dash panels will allow you to mount stock switches, plus 4 additional across the dash of your Ride Command equipped RZR. Designed, machined and finished in the USA by 50 Caliber Racing. Available in powder-coat or raw finish that will give your RZR that unique custom look. Please select color and dash kit options...
This Kit will allow you to mount 8 switches across the dash of your XP1000. Our 6061 Billet Aluminum CNC Dash Panels are machined then powder coated here at 50 Caliber Racing and were designed to give your RZR that unique custom look.Please select color and options before ordering!
Custom USA Made, 50 Caliber Racing left dash panel kit will allow you to mount 3 additional switches on the left side of your XP1000. Available in raw or powder-coated finish. Gives your RZR a unique custom look. Order dash panel only or add 3 waterproof rocker switches for only $30 more. Be sure to select color and switch options before ordering!
50 Caliber Racing Custom CNC Billet Aluminum Grille for CAN AM X3. Add a unique look to your X3 with our custom CNC aluminum grill. This grill transforms the look of your Can-Am drastically. If you want to stand out from the crowd this is the grill for you. Choose from 1 piece grille or full 4 piece set. Available in several colors. Be sure to select kit...
Room for stock switches plus 4 more! CNC machined from 6061 billet aluminum stock and emblazoned with the 50 Caliber Racing logo. Includes stainless mounting hardware. Available in raw or powder-coat finish in one of several colors to match any color scheme. Lifetime warranty on dash panels. Made in the USA!Available in 2 or 3 piece kits, with or without...
50 Caliber Racing CNC billet center dash panels are machined from 6061 billet aluminum and engraved with a stylized Polaris RZR logo. Includes stainless mounting hardware. Available in raw or powder-coat finish in one of several colors to match any color scheme. Lifetime warranty on dash panels. Made in the USA!Be sure to select color before ordering!
Open roll cage tubes just don't look nice, and plain black caps are boring. Our CNC billet aluminum cap slips into the end of 1.75" .095 tubing, giving you a custom, finished look to your roll cage. Milled from 6061 billet aluminum and engraved with the 50 Caliber Racing logo. Made right here in the USA!Price is for one pair of end caps
50 Caliber Racing CNC Billet Sway Bar End Link Kit for Polaris RZR XP1000, Turbo, S 900, & RS1 models. Custom sway bar end links are machined in the USA from solid 6061 CNC billet aluminum and fitted with 4130 5/8" Heim joints with Teflon / nylon liner. These billet rods are as stout as it gets. If you want a bulletproof set up for your RZR, you need...
Stock RZR Radius rods are light duty and frequently fail during aggressive driving, racing and jumping. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and bent and/or wallowed out frame mounting tabs. Heavy duty 50 Caliber Racing CNC radius rods completely solve this problem with massive 1.25" billet rods, 4130...
Custom 50 Caliber Racing CNC Billet Aluminum Dash panel plates for your 2015 and up RZR with factory interactive 4.3" digital display and GPS option, including XP 1000, S 900, 900 Trail and 900 XC. This kit will allow you to mount your original switches, plus 4 additional full size switches for your lights and accessories.Be sure to select color before...
Custom 50 Caliber Racing CNC Billet Aluminum Dash panel plates for your 2015 and up RZR with factory interactive 4.3" digital display and GPS option, including XP 1000, S 900, 900 Trail and 900 XC. This kit will allow you to mount your original switches, plus add room for 4 more full size switches to control your lights and accessories. Dash panels only,...
Custom 50 Caliber Racing CNC Billet Aluminum Dash panel plates for your 2015 and up RZR with factory interactive 4.3" digital display and GPS option, including XP 1000, S 900, 900 Trail and 900 XC. This kit will allow you to mount your original switches, plus add room for 4 more full size switches to control your lights and accessories. Dash panels only,...