Exterior

50 Caliber Racing Custom Hood Bling Panels for RZR XP Turbo /  Turbo S. Decorative steel panels with a two tone powdercoat finish, designed to install on hood of your RZR. CNC laser cut for a super precision clean look. These panels will give you a unique, awesome, custom touch that you can't get anywhere else. Stainless fasteners included for a quick, easy installation. Available with red/black or clear over raw/black finish.

Be sure to select color before ordering!

50 Caliber Racing Custom Engine Cover For Can-am X3, all models 2016-2021+. Add some engine protection along with killer unique style to your X3 with our custom engine cage cover. Replaces the boring factory plastic rear covers to give your car a different look from everyone else. Covers all of the exposed engine and frame below the plastics in the rear of the machine. CNC laser cut from thin gauge sheet steel with custom X3 side logos and a 50 Caliber Racing logo under the exhaust tip. 100% hand-built in the USA.

** DISCONTINUED **

Protect your Wildcat and your passengers with a 50 Caliber Racing bolt on intrusion V-bar. This burly welded steel V-bar provides extra bracing and support for the weakest area of the stock cage. V-bars stiffen your chassis, provide rollover protection and block large objects from entering through your windshield and into the passenger compartment.

50 Caliber Racing over the dash bar provides extra bracing to the front windshield area of your factory cage. Clamp on design for quick and easy installation. 100% hand-built in the USA by 50 Caliber Racing.

Custom built roll cage for 2 seat RZR 800, XP900. All 50 Caliber Racing cages are hand built in our Las Vegas NV fab shop. We build cages for all UTV makes and models. We design and build all cages to be stronger than stock. Many of our customers run our cages in their WORCS and BITD race prepped cars. We can make any changes that you want, plus we have a list of common options that you can choose from. Build times can vary depending on our business volume.

Call our fab shop for accurate lead time before ordering: 702-889-1741

A spare tire is essential, especially when you are off road. This 50 Caliber Racing high strength welded steel mount bolts directly to the bed on your 2 or 4 seat Can-Am X3. 100% made in the USA. Available in two designs: one which will fit up to a 32" inch tire, and a modified design which will fit a 35" tire.

Be sure to choose correct mount for your tire size before ordering!

A spare tire is essential, especially when you are off road. This 50 Caliber Racing high strength, tubular steel tire carrier mount clamps directly to the 1.75 inch diameter roll cage cross bar above the bed on your 2 or 4 seat RZR XP1000. 100% made in the USA.

- Keeps Hands Warm
- Keeps Beers Cold
- 2 Sided Print, 1 side 50 cal logo, other side slogan
- Multiple designs to choose from

Toss your flexy, stamped stock rear plate and replace it with a 50 Caliber Racing heavy duty radius arm plate. Adds stiffness and strength to the rear suspension mounting points of your X3, resulting in a stable, predictable ride with sure footed control over whoops, jumps, high speed turns and any other extreme driving conditions. Made from 1/8 thick steel plate with black powdercoat finish. 

Protect your RZR with our heavy duty tubular steel bumper. Fully welded construction. Durable powdercoat finish, tabs for a 50 Caliber Racing 10" Elite light bar, and CNC machined end caps.

Be sure to choose color before ordering!

Add a killer look and increased air flow to your 2017-2018+ RZR XP Turbo with a 50 Caliber Racing CNC made 6061 billet aluminum grille. This is the most outside the box unique grille in the market, This grille transforms the look of your RZR drastically compared to the competitions grilles that are half its size. Available in several colors.

Be sure to select color before ordering!

Set of two 50 Caliber Racing UTV side mirrors. Fully adjustable with shatter-proof tempered glass and ball socket joint for unlimited viewing angles. Actual mirror dimensions: 5.5″ x 9.4″ includes clamps for 2" tubing.

Custom built roll cage with aluminum roof. All 50 Caliber Racing roll cages are hand built in our Las Vegas NV fab shop. We build cages for all UTV makes and models. We design and build all cages to be stronger than stock. Many of our customers run our cages in their WORCS and BITD race prepped cars. We can make any changes that you want, plus we have a list of common options that you can choose from. Build times can vary depending on our business volume, but most cages are ready for shipment in 7-14 days. 

Call our fab shop to order: 702-889-1741

Custom built roll cage with aluminum roof. All 50 Caliber Racing roll cages are hand built in our Las Vegas NV fab shop. We build cages for all UTV makes and models. We design and build all cages to be stronger than stock. Many of our customers run our cages in their WORCS and BITD race prepped cars. We can make any changes that you want, plus we have a list of common options that you can choose from. Build times can vary depending on our business volume, but most cages are ready for shipment in 7-14 days. 

Call our fab shop to order: 702-889-1741

Custom built roll cage with aluminum roof for 4 seat RZR XP1000. All 50 Caliber Racing roll cages are hand built in our Las Vegas NV fab shop. We build cages for all UTV makes and models. We design and build all cages to be stronger than stock. Many of our customers run our cages in their WORCS and BITD race prepped cars. We can make any changes that you want, plus we have a list of common options that you can choose from. Build times can vary depending on our business volume, but most cages are ready for shipment in 7-14 days.

Call our fab shop to order: 702-889-1741

50 Caliber Racing cages are hand built in our Las Vegas NV fab shop. We build cages for all UTV makes and models. Many of our customers run our cages in their WORCS and BITD race prepped cars. We can make any changes that you want, plus we have a list of common options that you can choose from. This is a lightweight but stout design that blows the factory cage away in safety and rigidity. 

Call our fab shop to order: 702-889-1741

Custom Square Back Roll Cage - DOM Tubing with Aluminum Roof for 4 Seat Polaris RZR 4 XP1000

Custom built roll cage. All 50 Caliber Racing cages are hand built in our Las Vegas NV fab shop. We build cages for all UTV makes and models. We design and build all cages to be stronger than stock. Many of our customers run our cages in their WORCS and BITD race prepped cars. We can make any changes that you want, plus we have a list of common options that you can choose from. Build times can vary depending on our business volume, but most cages are ready for shipment in 7-14 days. 

Call our fab shop to order: 702-889-1741

50 Caliber Rock n' Roll Cage - DOM Tubing with Aluminum Roof for 4 Seat Polaris RZR 4 XP1000

Custom built roll cage. All of our cages are hand built in our Las Vegas NV fab shop. We build cages for all UTV makes and models. We design and build all cages to be stronger than stock. Many of our customers run our cages in their WORCS and BITD race prepped cars. We can make any changes that you want, plus we have a list of common options that you can choose from. Build times can vary depending on our business volume.

Call our fab shop for accurate lead time before ordering: 702-889-1741

Pro Race Cage for Polaris RZR 4 Seat XP1000

All 50 Caliber Racing cages are hand built in our Las Vegas NV fab shop. We build cages for all UTV makes and models. Many of our customers run our cages in their WORCS and BITD race prepped cars. We can make any changes that you want, plus we have a list of common options that you can choose from.

Call our fab shop to order: 702-889-1741

Protect your RZR with our heavy duty tubular steel bumper. Constructed from .095 wall steel tubing, this bumper is strong yet lightweight. Hand welded joints for strength and 6 durable powdercoat colors to choose from to enhance the custom look of your RZR. Bolt on design. 100% hand-built in the USA by 50 Caliber Racing.

Be sure to choose color before ordering!

Protect your RZR with our heavy duty tubular steel bumper. Constructed from .095 wall steel tubing, this bumper is strong yet lightweight. Hand welded joints for strength and 6 durable powdercoat colors to choose from to enhance the custom look of your RZR. Bolt on design. 100% hand-built in the USA by 50 Caliber Racing.

Be sure to choose color before ordering!

Set of 2 of universal breakaway side mirrors. Perfect fit for your UTV, driver, and passenger side included. High impact ABS housing with shatter-proof tempered glass and ball socket joint for unlimited viewing angles. Actual mirror dimensions: 3.75" x 7.25" includes clamps & rubber sleeves to fit round tubing from 1-5/8" OD up to 2" OD.

Custom built roll cage for 2 seat RZR S 900. All 50 Caliber Racing cages are hand built in our Las Vegas NV fab shop. We build cages for all UTV makes and models. We design and build all cages to be stronger than stock. Many of our customers run our cages in their WORCS and BITD race prepped cars. We can make any changes that you want, plus we have a list of common options that you can choose from. Build times can vary depending on our business volume.

Call our fab shop for accurate lead time before ordering: 702-889-1741

Custom heat shield exhaust cover for Polaris RZR PRO XP. Get rid of the ugly stock plastic rear "bumper" panel and add a more aggressive look to your RZR. Black powdercoat steel frame with honeycomb mesh allows for increased cooling, better departure angles, and some killer unique style. CNC laser cut from thin gauge sheet steel with 50 Caliber Racing logo at the bottom. 100% made in the USA! Fits 2020-2023 models. 2024-Up require brackets that are sold separately.