Suspension & Steering

Stock rods on your Can-Am X3 do not hold up to aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and bent and wallowed out frame tabs. 50 Caliber Racing completely solves this problem with 1.25" CNC rods and 4130 Chromoly 5/8" heim joints with nylon / Teflon liner. Available in raw or powder coat finish.

Be sure to select the correct size  & finish before ordering!

50 Caliber Racing Tie Rods. Machined in the USA from solid billet aluminum. Fitted with 5/8 inch 4130 chromoly heim joints. Designed for extreme duty for Arctic Cat Textron Wildcat 2 & 4 seat UTVs. If you want a bulletproof setup on your Wildcat, you'll need our heavy duty tie rods! Available with black powdercoat finish or raw (no finish).

Be sure to select finish before ordering!

Toss your flexy, stamped stock rear plate and replace it with a 50 Caliber Racing heavy duty radius arm plate. Adds stiffness and strength to the rear suspension mounting points of your RZR XP1000, Turbo, and RS1 resulting in a stable, predictable ride with sure footed control over whoops, jumps, high speed turns and any other extreme driving conditions. Available with no finish (raw) or black powder coat.

Be sure to select your RZR year and finish before ordering!

Stock RZR Radius rods are light-duty and frequently fail during aggressive driving, racing and jumping. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and bent and/or wallowed out frame mounting tabs. 50 Caliber Racing CNC radius rods completely solve this problem with massive 1.25" billet rods, 4130 Chromoly 5/8" Heim joints with nylon / Teflon liner. This setup is bulletproof. Available in raw or powder coat finish.

Be sure to choose color before ordering!

Stock RZR Radius rods are light duty and frequently fail during aggressive driving, racing and jumping. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and bent and/or wallowed out frame mounting tabs. 50 Caliber Racing CNC radius rods completely solve this problem with massive heavy duty 1.25" billet rods, 4130 Choromoly 5/8" Heim joints with nylon / Teflon liner. This setup is bulletproof. Available in raw or powdercoat finish. The kit fits both 2 and 4, seat models.

Be sure to select color before ordering!

Stock RZR Radius rods are light-duty and frequently fail during aggressive driving, racing and jumping. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and bent and/or wallowed out frame mounting tabs. 50 Caliber Racing CNC radius rods completely solve this problem with massive 1.25" billet rods, 5/8" Chromoly Heim joints with nylon/Teflon liners. This setup is bulletproof. Available in raw or powder coat finish.

Be sure to specify desired finish before ordering!

50 Caliber Racing Heavy Duty Adjustable Greaseable Ball Joint for Polaris RZR XP1000 XP Turbo 2014+. Replace your worn factory part with this adjustable ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup and low profile grease zerk. Adjustable end cap allows for slop to be removed as the ball joint wears. Fits upper & lower a-arms on both sides. 6 month warranty covers any breakage no matter how you broke it! Replaces Polaris part #(s) 7082487, 7082422, 7082275, 7081992, 7081867.

50 Caliber Racing Heavy Duty Radius Rod Kit for RZR PRO XP 2020+, fits both 2 and 4 seat models. Stock radius rods are light duty and frequently fail during aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and damaged frame tabs. Our rod kit solves this problem with huge 1.25" billet rods, and 4130 Chromoly 5/8" heim joints with teflon / nylon liner. This setup is bulletproof. Available in raw or powdercoat finish.

Be sure to specify desired finish before ordering!

50 Caliber Racing Heavy Duty CNC Billet Tie Rod Kit for RZR Turbo S 2018-2022. If you race or drive aggressively, stock tie rods will not hold up. These heavy duty, 1.125" (1 1/8") diameter rods are machined in the USA from solid 6061 CNC Billet aluminum. They are fitted with 5/8 inch heat treated 4130 Chromoly Heim joints and 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type of rods you can get, and they are practically bulletproof!

Be sure to choose finish before ordering!

Stock RZR Radius rods are light duty and frequently fail during aggressive driving, racing and jumping. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and bent and/or wallowed out frame mounting tabs. Heavy duty 50 Caliber Racing CNC radius rods completely solve this problem with massive 1.25" billet rods, 4130 Chromoly 5/8" Heim joints with nylon / Teflon liner. This setup is bulletproof. Available in raw or powdercoat finish.

Be sure to specify RZR year and & color before ordering!

50 Caliber Racing CNC Billet Rear Sway Bar End Link Kit for Polaris RZR XP1000 and XP Turbo models. Custom sway bar end links are machined in the USA from solid 6061 CNC billet aluminum and fitted with 4130 5/8" Heim joints with Teflon / nylon liner. These billet rods are as stout as it gets. If you want a bulletproof set up for your RZR, you need these end links! Available with black powdercoat finish, or raw.

Be sure to choose color before ordering!

Stock tie rods will not hold up to aggressive driving. 50 Caliber Racing heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 Chromoly Heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. Available with black powdercoat or raw (no finish). Fits RZR XP900 2 & 4 seat models.

Be sure to specify finish before ordering!

Toss your flexy, stamped stock rear plate and replace it with a 50 Caliber Racing heavy duty radius arm plate. Adds stiffness and strength to the rear suspension mounting points of your X3, resulting in a stable, predictable ride with sure footed control over whoops, jumps, high speed turns and any other extreme driving conditions. Made from 1/8 thick steel plate with black powdercoat finish. 

Stock tie rods will not hold up to aggressive driving. 50 Caliber Racing heavy duty, 1.125" diameter rods are machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated 4130 chromoly Heim joints coupled with 304 stainless clevis yoke ends to fit your steering rack. These are the strongest rods you can get, they are practically bulletproof! Available in black powdercoat or raw (no finish).

Be sure to specify finish before ordering!

If you race or drive aggressively, stock tie rods will not hold up. 50 Caliber Racing heavy duty, 1.125" (1 1/8") diameter rods are machined in the USA from solid 6061 CNC Billet aluminum. They are fitted with 5/8 inch heat treated 4130 chromoly heim joints and 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type of rods you can get, and they are practically bulletproof!

Be sure to specify year, model and finish before ordering!

50 Caliber Racing Heavy Duty Billet Tie Rod Kit for RZR RS1

If you race or drive aggressively, stock tie rods will not hold up. 50 Caliber Racing heavy duty, 1.125" (1 1/8") diameter rods are machined in the USA from solid 6061 CNC Billet aluminum. They are fitted with 5/8 inch heat treated 4130 chromoly heim joints and 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type of rods you can get, and they are practically bulletproof!

Be sure to specify year, model and finish before ordering!

Replace your worn factory part with a high capacity sealed ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup for extra long life. Fits upper & lower a-arms on both sides. Ready to install and get your machine back on the trail. Replaces OEM Polaris part number(s) 7082487, 7082422, 7082275, 7081992, 7081867.

Stock RZR Radius rods are light-duty and frequently fail during aggressive driving, racing and jumping. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and bent and/or wallowed out frame mounting tabs. 50 Caliber Racing Heavy Duty Radius rod kit completely solves this problem. With massive 1.25" billet rods, 4130 Chromoly 5/8" Heim joints with nylon / Teflon liner. This setup is bulletproof. Available in raw or powdercoat finish.

Be sure to specify your RZR year & desired finish before ordering!

If you race or drive aggressively, stock tie rods will not hold up. 50 Caliber Racing heavy duty, 1.125" (1 1/8") diameter rods are machined in the USA from solid 6061 CNC Billet aluminum. They are fitted with 5/8 inch heat treated 4130 Chromoly Heim joints and 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type of rods you can get, and they are practically bulletproof!

Be sure to specify year, model and finish before ordering!

Heavy duty Sway Bar End Links for Polaris RZR PRO R 2 & 4 seat models. CNC Machined in the USA from solid 6061 billet aluminum and fitted with chromoly PTFE heim joints. These links are as stout as it gets. If you want a bulletproof set up for your RZR, you need these end links! Choose front or rear position. Available in raw aluminum or black powdercoat finish.

Be sure to choose location and finish before ordering!

Custom tie rod kit from 50 Caliber Racing. Machined in the USA from 6061 CNC Billet aluminum and fitted with 5/8 inch heat treated, Teflon lined 4130 Chromoly Heim joints. These are the strongest rods you can get for your X3, they are practically bulletproof!

Be sure to select the correct size & finish before ordering!

Heavy duty Rear Sway Bar End Link Kit for Polaris RZR PRO XP 2 & 4 seat models. Machined in the USA from solid 6061 CNC billet aluminum and fitted with 4130 5/8" heim joints with teflon / nylon liner. These end links are as stout as it gets. If you want a bulletproof set up for your RZR, you need these end links! Available with black powdercoat finish, or raw.

Be sure to choose color before ordering!

50 Caliber Racing CNC Billet Rear Sway Bar End Link Kit for Can-Am X3 2 and 4 seat models. Custom sway bar end links are machined in the USA from solid 6061 CNC billet aluminum and fitted with 4130 5/8" heim joints with Teflon / nylon liner. These billet rods are as stout as it gets.  If you want a bulletproof set up for your X3, you need these end links! Available with black powdercoat finish, or raw.

Be sure to choose color before ordering!

Heavy Duty Radius Rod Kit for RZR PRO R / Turbo R 2022+. Fits both 2 and 4 seat models. Stock radius rods are light duty and frequently fail during aggressive driving. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and damaged frame tabs. Our rod kit solves this problem with huge 1.25" billet rods, and 3/4" chromoly heim joints. This setup is practically bulletproof. Available in raw or powdercoat finish.

Be sure to select finish before ordering!