RS1

Stock RZR Radius rods are light-duty and frequently fail during aggressive driving, racing and jumping. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and bent and/or wallowed out frame mounting tabs. 50 Caliber Racing CNC radius rods completely solve this problem with massive 1.25" billet rods, 4130 Chromoly 5/8" Heim joints with nylon / Teflon liner. This setup is bulletproof. Available in raw or powder coat finish.

Be sure to choose color before ordering!

Toss your flexy, stamped stock rear plate and replace it with a 50 Caliber Racing heavy duty radius arm plate. Adds stiffness and strength to the rear suspension mounting points of your RZR XP1000, Turbo, and RS1 resulting in a stable, predictable ride with sure footed control over whoops, jumps, high speed turns and any other extreme driving conditions. Available with no finish (raw) or black powder coat.

Be sure to select your RZR year and finish before ordering!

50 Caliber Racing Solid Steel Extended Spike Lug Nuts with 12x1.5 thread. Fits Polaris RZR Pro R, Turbo R, Pro S, Pro XP, XP1000, XP Turbo, S900, 1000, Can-Am X3, Maverick R, Honda Talon, Pioneer, Textron Wildcat XX. Heat treated, hardened steel lug nuts with 4.5" extended spikes for your UTV. Tapered 60 degree acorn tapered seat. Includes 16, 20 or 24 lug nuts and an extra long socket key for installation/removal. Offered in chrome and several colors to match any color scheme.

Be sure to select correct quantity and color before ordering!

50 Caliber Racing - 4 x 156 Wheel Spacer - 12x1.5 Studs. Billet CNC wheel spacers offer wider stance for better stability and more tire clearance. 4x156 bolt pattern with 12x1.5mm studs for Polaris General, RZR XP1000, S 900, S 1000 and XP Turbo models, Arctic Cat Wildcat XX. Includes lug nuts. Price is for one wheel spacer.

Please choose size and quantity before ordering

If you race or drive aggressively, stock tie rods will not hold up. 50 Caliber Racing heavy duty, 1.125" (1 1/8") diameter rods are machined in the USA from solid 6061 CNC Billet aluminum. They are fitted with 5/8 inch heat treated 4130 Chromoly Heim joints and 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type of rods you can get, and they are practically bulletproof!

Be sure to specify year, model and finish before ordering!

Carbon fiber look bucket seat from 50 Caliber Racing for your RZR XP1000. This aftermarket seat features a supportive tubular metal frame, thick bolsters, and 4 point harness pass through holes. Upholstered in black vinyl with awesome carbon fiber look inserts and an embroidered logo. Removable bottom cushion for easy cleaning.

Price is for one seat

Add some bling to your ride! These 50 Caliber Racing flat base UTV lug nuts for hub centric wheels are made from hardened steel alloy, with a durable and handsome chrome finish. They are designed for use on OEM and aftermarket hub centric wheels without tapered lug seat. Threaded for 12x1.5mm Metric size wheel studs found on many Polaris, Can-Am and Honda UTV models.

Price is for a set of 16

• Mini bucket booster seat for kids ages 1–6
• Fits most UTVs including Polaris RZR and Can-Am X3
• Built-in harness slots for 4- or 5-point belts
• Thick bolsters and padded foam for added comfort and support
• Lightweight frame – easy to move or permanently mount
• Upholstery resists mud, water, and trail dust

50 Caliber Racing Heavy Duty Billet Tie Rod Kit for RZR RS1

If you race or drive aggressively, stock tie rods will not hold up. 50 Caliber Racing heavy duty, 1.125" (1 1/8") diameter rods are machined in the USA from solid 6061 CNC Billet aluminum. They are fitted with 5/8 inch heat treated 4130 chromoly heim joints and 304 stainless clevis yoke ends to fit your specific steering rack. These are the strongest type of rods you can get, and they are practically bulletproof!

Be sure to specify year, model and finish before ordering!

Polaris secondary clutch, part number 1323394. This is a Genuine OEM Polaris Part. There are many offshore aftermarket replacements available at a lower price, but none of them can match the quality of Polaris OEM clutch parts. We recommend stock clutch parts for longevity and reliability. Fits XP Turbo and RS1 models 2017-2020.

Polaris RZR inner clutch cover, part number 2209338 . This is a Genuine OEM Polaris part. Brand new, not rebuilt. Fits XP Turbo 2019-2021 / Turbo S 2018-2021 / RS1 2018-2021 Replaces OEM Part numbers - 5141082, 5142589, 2209338.

50 Caliber Racing Heavy Duty Adjustable Greaseable Ball Joint for Polaris RZR XP1000 XP Turbo 2014+. Replace your worn factory part with this adjustable ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup and low profile grease zerk. Adjustable end cap allows for slop to be removed as the ball joint wears. Fits upper & lower a-arms on both sides. 6 month warranty covers any breakage no matter how you broke it! Replaces Polaris part #(s) 7082487, 7082422, 7082275, 7081992, 7081867.

Replace your worn factory part with a high capacity sealed ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup for extra long life. Fits upper & lower a-arms on both sides. Ready to install and get your machine back on the trail. Replaces OEM Polaris part number(s) 7082487, 7082422, 7082275, 7081992, 7081867.

Polaris Primary Drive Clutch part number 1323762. This is a Genuine OEM Polaris Part. There are many offshore aftermarket replacements available at a better price, but none of them can match the quality of Polaris OEM clutch parts. Replaces OEM part #s: 1323762, 1323624,1323534. Fits RS1 2018-2021, Turbo S 2020 only.

Universal clamp on mounting brackets make it easy to mount an LED light bar, mirror, pod lights and more to any round tube. Slotted holes clamps provide room to mount almost any size light bar, straight or curved. Roll cages, roof racks, wakeboard towers, bumpers, brush guards, bull bars and more! Available in the  most common UTV roll cage sizes:  1.75" and 2".

Be sure to choose size before ordering. Price is for one pair (2) of clamps.

50 Caliber Racing Quick Release Fire Extinguisher Mount . Two piece design with stainless hardware and multiple points of contact for rattle free reliable performance. Stainless catch pins resist corrosion. Just pull the large red knob to release, and your extinguisher is ready to use. Mounts directly to any size roll bar, or can be bolted down to any surface. Works great with most 3-3.5" diameter bottles (extinguisher not included).

Polaris OEM Factory Replacement Outer Clutch Cover, Part #2637068 for RZR XPT 19-up, Turbo S, RS1. Genuine OEM Polaris part number 2637068. This is a brand new factory part. Fitment is specific, contact us if you need help to verify before purchasing.

• Rugged .095″ wall steel tubing for max protection with less weight
• Bolt-on fit for Polaris RZR XP 1000 / Turbo / RS1 2019+ and more
• Hand-welded joints with black powdercoat finish
• CNC-machined 50 Cal logo end caps for aggressive style
• Built-in tabs for a 10" Elite light bar
• 100% hand-built in the USA by 50 Caliber Racing

Be sure to choose color before ordering!

This pair of 50 Caliber Racing LED lighted whips are super bright and fully adjustable with over 300 different strobe effects & light patterns, and 20 different color options. Comes with a remote control or you can use the bluetooth app on your smart phone. Quick connect base and flexible water/sand proof outer casing. Each whip comes with a 50 Cal Flag and swivel clips. Available in 2, 4 and 6 foot lengths.

Be sure to choose length when ordering!

50 Caliber Racing LED lighted whips are super bright and fully adjustable, with over 300 different strobe effects & light patterns, and 20 different color options. Comes with a remote control or you can use the bluetooth app on your smart phone. Quick connect base and flexible water/sand proof outer casing. Each whip comes with a 50 Cal flag and and swivel clip mounts. Add safety and visibility to your UTV, truck, Jeep, sand rail and more! Available in 4 and 6 foot lengths.

Be sure to choose whip length when ordering!

Polaris front differential gearcase, part number 1337228. This is a Genuine OEM Polaris Part. Replaces OEM Part numbers - 1333877, 1334141, 1334183, 1334305, 1334398 1334398, 1334432, 1337145, 1337228.  Brand new, not rebuilt. Fits Turbo S, PRO XP, RS1.

50 Caliber Racing Seat Belt Bypass Override Plug for Polaris RZR and Ranger UTVs 2015+. This simple device will override the factory speed limiter, allowing you to install an aftermarket harness for better safety and comfort. Installation could not be easier. No cutting or splicing required, just plug it in and go!

- 5-point harness with 2-inch belts
- Matching 5th point antisubmarine strap - Great for smaller or youth riders
- Racing style quick-release latch buckle
- Easily adjustable to fit almost anyone
- Comfy sewn-in shoulder pads & Sternum Strap
- Available in several colors: Black, Red, Blue, Silver, Orange, Pink, Green, Purple and Camo

Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs. Be sure to select color before ordering!

- 4-point harness with 2-inch belts
- Great for smaller or youth riders
- Racing style quick-release latch buckle
- Easy adjusters
- Comfy sewn-in pads
- Sewn-in sternum strap
- Available in several colors!

Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs. Be sure to select color before ordering!