Interior

- Keeps Hands Warm
- Keeps Beers Cold
- 2 Sided Print, 1 side 50 cal logo, other side slogan
- Multiple designs to choose from

Can-am factory roll cages do not have any provision for 4 point safety harnesses. The 50 Caliber Racing Roll Cage Harness Bar clamps to your factory cage, allowing you to mount safety harnesses on all 4 seats.

• Kid-sized bump seat for Arctic Cat Wildcat models
• Fits 2- and 4-seaters (front bolts in, rear needs harness bar)
• Mounts over center bump using factory hardware
• Durable vinyl seat with harness slot
• Quick, easy install – no drilling in front position
• Designed for kids 60 lbs or less – off-road use only
• Bump seat only, harness sold separately.

• Rear bump seat for Polaris RZR PRO XP 4, PRO R, and Turbo R
• Mounts in rear center using included brackets and hardware
• Perfect fit for kids under 60 lbs – off-road use only
• Durable vinyl seat with harness pass-through slot
• Compatible with most 4- or 5-point 2" harnesses
• Quick install – no modifications required

Can-am factory roll cages do not have any provision for 4 point safety harnesses. The 50 Caliber Racing Roll Cage Harness Bar clamps to your factory cage, allowing you to mount driver and passenger 4 point harnesses.

• Rear bump seat for Kawasaki Teryx4 750 & 800 (2008–2025)
• Mounts in rear center using factory hardware
• Fits kids up to 60 lbs – off-road use only
• Durable black vinyl seat with harness pass-through
• Designed for use with 4- or 5-point harness (sold separately)
• Quick bolt-in install – no drilling required

• Rear bump seat for Polaris General 4 1000 (2015–2025)
• Designed for rear center position – 4-seat models only
• Mounts using factory hardware – only 2 holes to drill
• Durable vinyl seat with harness pass-through slot
• For use with 2" 4- or 5-point harnesses (sold separately)
• Max rider weight: 60 lbs – off-road use only

• Bump seat for Can-Am Maverick X3 2- and 4-seat models
• Mounts over center bump using stock seat belt hardware
• Designed for kids up to 60 lbs – off-road use only
• Compatible with 4- or 5-point harnesses (sold separately)
• Fits front or rear position in most X3 models
• Durable black vinyl with harness pass-through

• Bump seat with harness for RZR 570, 800, and XP900 (2 & 4 seaters)
• Mounts over center bump using factory seat belt hardware
• Includes padded 4-point harness – multiple color options
• Fits kids under 60 lbs – off-road use only
• Installs in front or rear position (depending on model)
• High seat position for better view and trail visibility

Be sure to choose harness color and style before ordering!

• Bump seat for RZR 570, 800, and XP900 (2008–2014 models)
• Fits 2- and 4-seat models – mounts in front or rear position
• Designed for kids under 60 lbs – off-road use only
• Uses factory seat belt mounting hardware
• Vinyl seat with harness pass-through (harness sold separately)
• Easy bolt-in install – no cutting or fab work

• Bump seat for RZR XP 1000, XP Turbo, S 900, and more (2014–2024)
• Mounts over center bump in 2- or 4-seat models
• Seat only – works with 2" 4- or 5-point harnesses (not included)
• For kids under 60 lbs – off-road use only
• Vinyl upholstery with harness pass-through
• Easy install with factory seat belt hardware

Carbon fiber look bucket seat from 50 Caliber Racing for your RZR XP1000. This aftermarket seat features a supportive tubular metal frame, thick bolsters, and 4 point harness pass through holes. Upholstered in black vinyl with awesome carbon fiber look inserts and an embroidered logo. Removable bottom cushion for easy cleaning.

Price is for one seat

Need more seating for your 4 seat RZR XP1000 or Turbo? Give your passengers the comfort and stability of 50 Caliber Racing high bolster bucket seats. Plus add a secure middle seated position for a smaller 5th passenger! Designed to re-use original seat bases and keep the quick release feature. Upholstered in black vinyl with awesome carbon fiber look inserts and an embroidered logo.

50 Caliber Racing Split Bench Seat for Polaris RZR XP1k Turbo 2 and 4 seat models. Need more seating for your RZR XP1000 or Turbo? Give your passengers the comfort and stability of high bolster bucket seats plus add a secure middle seated position for a smaller additional passenger! Designed to re-use original seat bases and keep the quick release feature. Upholstered in black vinyl with an embroidered logo.

Polaris OEM Factory Replacement Seat Base 5450170 for RZR S 900/1000, XP1000, XP Turbo, Turbo S, General. This is a factory original equipment replacement for the seat bases that tend to crack and break over time. This is the base only, it does not include latch. See below for fitment.

Universal clamp on mounting brackets make it easy to mount an LED light bar, mirror, pod lights and more to any round tube. Slotted holes clamps provide room to mount almost any size light bar, straight or curved. Roll cages, roof racks, wakeboard towers, bumpers, brush guards, bull bars and more! Available in the  most common UTV roll cage sizes:  1.75" and 2".

Be sure to choose size before ordering. Price is for one pair (2) of clamps.

50 Caliber Racing Seat Belt Bypass Override Plug for Can-Am Commander, Maverick and X3 UTVs 2010+. This simple device will override the factory speed limiter, allowing you to install an aftermarket harness for better safety and comfort. Installation could not be easier. No cutting or splicing required, just plug it in and go!

Designed, machined and finished in the USA by 50 Caliber Racing. Available in powder-coat or raw finish that will give your RZR XP1000 that unique custom look. Includes stainless mounting hardware for a quick and easy install. This is the matching center panel for our 6 switch dash panel kit.

Please select color before ordering!

Looking for a place to add dash switches to your car, truck, SUV, or Side by Side? A 50 Caliber Racing custom dash panel gives you 4 additional full size switch locations. Available with powder coat finish or raw aluminum. Made in the USA!

Be sure to select color before ordering!

Custom 50 Caliber Racing CNC Billet Aluminum Dash panel plates for your 2015 and up RZR with factory interactive digital display and GPS option, including XP 1000, S 900, 900 Trail and 900 XC. This kit will allow you to mount your original switches, plus 4 additional full size switches for your lights and accessories. Kit includes dash panels and 4 waterproof rocker switches.

Be sure to select color before ordering!

CNC Billet Aluminum Dash Switch Panels with 2 Switch Locations for RZR 170. Allows you to custom mount 2 switches on the dash panel of the Polaris RZR 170. CNC machined from 6061 billet aluminum stock and emblazoned with the 50 Caliber Racing logo. Includes stainless mounting hardware. Available in raw or powder-coat finish in one of several colors to match any color scheme. Lifetime warranty on dash panels. Made in the USA!.  Available with or without additional 12V rocker switches.

Be sure to select option and color before ordering!

Custom 50 Caliber Racing CNC Billet Aluminum Dash panel plates for your 2015 and up RZR with factory interactive 4.3" digital display and GPS option, including XP 1000, S 900, 900 Trail and 900 XC. This kit will allow you to mount your original switches, plus add room for 4 more full size switches to control your lights and accessories. Dash panels only, switches sold separately.

Be sure to select color before ordering!

• Rear bump seat for Polaris General 4 & XP 4 (2015–2025)
• Mounts in rear center using included hardware (2 holes required)
• Includes 2" 4-point harness with latch or auto buckle
• Fits kids up to 60 lbs – off-road use only
• Durable vinyl seat with padded harness options
• Multiple harness color choices available

Be sure to select harness color and style before ordering!

Adjustable universal clamp on mounting brackets make it easy to mount an LED light bar, pod light or HID to any round tube. Pivoting clamps provide room for adjustment so you can mount any size light bar, straight or curved. Roll cages, roof racks, wakeboard towers, bumpers, brush guards, bull bars and more! Use 1 clamp per mounting location on your off-road light bar or work light. Available in the 3 most common UTV roll cage sizes: 1.5". 1.75" and 2".

Be sure to choose size before ordering. Price is for one pair (2) of clamps.