No products
RZR RS1 Heavy Duty Billet Radius Rods
RZR RS1 Heavy Duty Billet Radius Rods
New product
Stock RZR Radius rods are light-duty and frequently fail during aggressive driving, racing and jumping. When they fail they usually cause massive damage: destroyed shocks, bent trailing arms, and bent and/or wallowed out frame mounting tabs. 50 Caliber Racing CNC radius rods completely solve this problem with massive 1.25" billet rods, 4130 Chromoly 5/8" Heim joints with nylon / Teflon liner. This setup is bulletproof. Available in raw or powder coat finish.
Be sure to choose color before ordering!
In stock
Scroll down for fitment and details!
More info
50 Caliber Racing Heavy Duty Radius Rod Kit for RZR RS1
Our rods are machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5/8 inch steel Heim joints. The rods are 1.25" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods, racing BITD, WORCS and the Mint 400, and have not had a single failure. They are designed for racing, extreme jumping, high speed whoops and all other abusive driving styles that you can dish out. If you want a bulletproof setup in the rear of your RS1, you need these rods!
Kit includes:
- Solid 6061 Billet Aluminum Upper and Lower Radius Rods (4 total)
- (8) 5/8" Heim Joints & jam nuts - (4130 Chromoly with nylon/Teflon liner)
- (16) High Misalignment Spacers
- CNC Engraved Logo
- Available in raw finish or powdercoat
- 2 Year Warranty (normal wear and tear to Heim's is not covered under warranty)
- Simple install with no modifications needed
- Made with pride in the USA!
Fits the following Polaris models:
- RZR RS1 (2018-2019)
Why do I need these rods?
50 Caliber Racing's Heavy Duty Radius Rods were designed to address one of the biggest flaws in the Polaris rear suspension design. The stock rods are extremely weak and will fail for many of you Polaris customers out there. They just don't hold up to aggressive driving. When they fail they usually destroy your shock, bend the trailing arm, bend frame tabs, and wallow out the holes on your frame.
Fitment
Fits the following Polaris models:
- RZR RS1 (2018-2019)
