RZR XP1000

Limited Edition: Custom webbing print design - Sugar Skulls Black Hardware: Gives your ride a sleek and modern look Easy Mounting: Removable shoulder strap mounting tabs Easy Adjustment: Low effort adjustment hardware for easy fitment Sewn-in Padding: Improved shoulder comfort for less neck fatigue and stress One Piece Design: Shoulder and lap belt sewn together for quick entry and removal Be Sure to Select Design and Bypass Options before ordering!

High quality 50 Caliber Racing backlit, single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. Waterproof casing makes it perfect for use in wet, sandy or dirty locations. LED Backlit Illumination with a custom etched design, guaranteed to put a smile on your face.Be sure to choose color before ordering!

50 Caliber Racing 4 Point Racing Harness with 3" Wide Straps, quick release latching system, with sewn in pads and sternum strap. Comfortable and versatile design can be bolted in or wrap around your cage in the rear and comes with adjustable clips for quick and easy installation. This racing harness is ideal for off road trucks, sand rails, UTV, racing, dune buggies, and any type of vehicle that you want to be safe in! Available in a wide range of colors to match any vehicle. Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs. Be sure to select color before ordering!

Genuine OEM Polaris wheel bearing part number 3514924.  Fits RZR XP1000, Turbo, S 900, General, RS1 and more.

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser-etched design "Dome Light". Dual LED illumination, rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!Be sure to choose color before ordering!

Brand New Polaris OEM Factory Replacement Front Gearcase 1337144 (Differential) for Polaris RZR XP1000 Highlifter, Trails & Rocks / Gold Matte Metallic. Genuine OEM Factory Polaris Part number 1337144. Replaces the following part numbers: 1333538, 1333791, 1334181, 1337144.

OEM Factory Replacement Drive Belt for your Polaris RZR XP 1000, S 1000, General.  From our experience of desert racing since 2011, we have found that the factory belts are hands down the best belt for endurance and longevity. Sure the aftermarket belts work, but the factory Polaris belt is the best in our opinion. Fits Polaris General 1000 (2020-2021),  RZR XP 1000 (2015-2021) * non turbo only,  RZR XP4 1000 (2015-2021) * non turbo only,  RZR S 1000 (2016-2020).

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser-etched sexy design "The Shocker". Dual LED illumination, rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!Be sure to choose color before ordering!

Heavy duty, weldable split collar steel tube clamp for 1.75" round tubing. CNC machined for accurate fit and finish. Just what you need for fabricating bolt-on accessories like light bar racks, cooler racks, spare tire carriers, V-bars, and more.* Price is for one clamp

RZR bump seat for kids – fits XP 1000, Turbo, Turbo S & more Safe center seat for riders 60 lbs or less Includes 4-point safety harness in your choice of color Easy install using stock seat belt hardware Mounts in front or rear of 2- or 4-seat Polaris RZR models Perfect kid upgrade for off-road family adventures Be sure to choose harness color and style before ordering!

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser-etched sexy design "Rock Lights" with girl. Dual LED illumination, rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!Be sure to select the correct color before ordering!

50 Caliber Racing ON/OFF/ON Marine Grade Rocker Switch, LED Backlit Available in Red Blue Green & Orange High quality 7 Pin ON/OFF/ON rocker switch, a 20 amp switch for 12 or 24 volt system. Single Pole Double Throw allows you to control 2 circuits separately. LED backlight illumination in a variety of colors.Be sure to choose color before ordering!

50 Caliber Racing 5 Point Racing Harness with 3" Wide Straps, quick release latching system, sewn in pads, sternum strap and 5th point antisubmarine strap. Comfortable and versatile design can be bolted in or wrap around your cage in the rear and comes with adjustable clips for quick and easy installation. This racing harness is ideal for off road trucks, sand rails, UTV, racing, dune buggies, and any type of vehicle that you want to be safe in! Available in a wide range of colors to match any vehicle.Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs. Be sure to select color before ordering!

50 Caliber Racing single pole, single throw Momentary / OFF rocker switch, a 20 amp switch for 12 or 24 volt system. Great for horns and PA systems. LED Backlight illumination in a variety of colors. Be sure to choose color before ordering!

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser-etched design "420" pot leaf. Dual LED illumination, rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!Be sure to select the correct color before ordering!

- 4-point harness with 2-inch belts- Great for smaller or youth riders- Racing style quick-release latch buckle- Easy adjusters- Comfy sewn-in pads- Sewn-in sternum strap- Available in several colors!Available as harness only or with a bypass plug for Polaris RZR or Can-Am UTVs. Be sure to select color before ordering!

Give your RZR a unique look with our custom CNC milled shift knob with 50 Caliber Racing logo. Designed to look like a 45mm anti-aircraft shell casing, each shifter handle is machined from solid billet aluminum for rugged looks and long lasting quality. Made in the USA. Be sure to select color before ordering!

50 Caliber Racing ON/OFF Marine Grade Rocker Switch, LED Backlit with Custom Etched Design - "Dome Light" High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser etched design and dual LED illumination are rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!Be sure to select the correct color before ordering!

Universal clamp on mounting brackets make it easy to mount an LED light bar, mirror, pod lights and more to any round tube. Slotted holes clamps provide room to mount almost any size light bar, straight or curved. Roll cages, roof racks, wakeboard towers, bumpers, brush guards, bull bars and more! Available in the  most common UTV roll cage sizes:  1.75" and 2".Be sure to choose size before ordering. Price is for one pair (2) of clamps.

Clamp on brackets allow you to brow mount a 50 Caliber Racing 40" LED light bar on your Polaris RZR XP1000, S 900 and Turbo. USA made from 1/8" steel plating with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting. Purchase brackets only or as a combo with a 240 watt 40" LED light bar.Be sure to choose a lighting option before ordering!

Add a unique look and increased air flow to your RZR with a 50 Caliber Racing custom CNC aluminum grille. This grille transforms the look of your RZR drastically. Machined from 6061 billet aluminum, powdercoated, then a relief engraving process afterwards creates a two toned effect that you can't get anywhere else. If you want to stand out from the crowd this is the grille for you. Includes stainless steel hardware for a quick and easy installation. Available in several colors. Be sure to select color before ordering!

Rugged .095″ wall steel tubing for max protection with less weight Bolt-on fit for Polaris RZR XP 1000 / Turbo / RS1 2019+ and more Hand-welded joints with black powdercoat finish CNC-machined 50 Cal logo end caps for aggressive style Built-in tabs for a 10" Elite light bar 100% hand-built in the USA by 50 Caliber Racing Be sure to choose color before ordering!

50 Caliber Racing weldable split tube clamp for adding on after thought accessories. CNC machined for accurate fit with protective oil coating that can be directly welded on. * Price is for one clamp

Mini bucket booster seat for kids ages 1–6 Fits most UTVs including Polaris RZR and Can-Am X3 Built-in harness slots for 4- or 5-point belts Thick bolsters and padded foam for added comfort and support Lightweight frame – easy to move or permanently mount Upholstery resists mud, water, and trail dust