RZR XP1000

Polaris front axle half shaft, part number 1333420. This is a Genuine OEM Polaris Part. There are many offshore aftermarket replacements available at a better price, but none of them can match the quality of Polaris OEM axles. We recommend stock drivetrain parts for longevity and reliability. Will fit right or left side, front position. RZR XP1000 2014-2019.

Polaris rear axle half shaft, part number 1333439. This is a Genuine OEM Polaris Part. There are many offshore aftermarket replacements available at a better price, but none of them can match the quality of Polaris OEM axles. We recommend stock drivetrain parts for longevity and reliability. Will fit right or left side, rear position. RZR XP1000 2014-2019.

Polaris rear axle half shaft, part number 1333944. This is a Genuine OEM Polaris Part. There are many offshore aftermarket replacements available at a better price, but none of them can match the quality of Polaris OEM axles. We recommend stock drivetrain parts for longevity and reliability. Will fit right or left side, rear position. RZR XP1000 2014-2019.

50 Caliber Racing Split Bench Seat for Polaris RZR XP1k Turbo 2 and 4 seat models. Need more seating for your RZR XP1000 or Turbo? Give your passengers the comfort and stability of high bolster bucket seats plus add a secure middle seated position for a smaller additional passenger! Designed to re-use original seat bases and keep the quick release feature. Upholstered in black vinyl with an embroidered logo.

50 Caliber Racing Heavy Duty Adjustable Greaseable Ball Joint for Polaris RZR XP1000 XP Turbo 2014+. Replace your worn factory part with this adjustable ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup and low profile grease zerk. Adjustable end cap allows for slop to be removed as the ball joint wears. Fits upper & lower a-arms on both sides. 6 month warranty covers any breakage no matter how you broke it! Replaces Polaris part #(s) 7082487, 7082422, 7082275, 7081992, 7081867.

Replace your worn factory part with a high capacity sealed ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup for extra long life. Fits upper & lower a-arms on both sides. Ready to install and get your machine back on the trail. Replaces OEM Polaris part number(s) 7082487, 7082422, 7082275, 7081992, 7081867.

Universal clamp on mounting brackets make it easy to mount an LED light bar, mirror, pod lights and more to any round tube. Slotted holes clamps provide room to mount almost any size light bar, straight or curved. Roll cages, roof racks, wakeboard towers, bumpers, brush guards, bull bars and more! Available in the  most common UTV roll cage sizes:  1.75" and 2".

Be sure to choose size before ordering. Price is for one pair (2) of clamps.

50 Caliber Racing Heat-treated, hardened steel lug nuts with 4.5" extended spikes for your car, truck, or UTV. Tapered 60-degree acorn tapered seat. Compatible with most aftermarket lug centric wheels. Requires extra long socket key for installation/removal. Available in several thread sizes and colors. Price is for one lug nut.

Be sure to choose thread size, color and quantity before ordering!

Brand New Polaris OEM Factory Replacement Air Filter, Polaris Part number 1241084. This is a Genuine OEM Polaris Part. There are many offshore aftermarket replacements available at a better price, but none of them can match the quality of Polaris OEM engine parts. Replaces OEM part numbers 1241084, 1240957 and 1240822. Fits RZR XP1000 2014-2022, XP Turbo 2016-2021 and PRO XP 2021-up.

50 Caliber Racing Quick Release Fire Extinguisher Mount . Two piece design with stainless hardware and multiple points of contact for rattle free reliable performance. Stainless catch pins resist corrosion. Just pull the large red knob to release, and your extinguisher is ready to use. Mounts directly to any size roll bar, or can be bolted down to any surface. Works great with most 3-3.5" diameter bottles (extinguisher not included).

50 Caliber Racing LED lighted whips are super bright and fully adjustable, with over 300 different strobe effects & light patterns, and 20 different color options. Comes with a remote control or you can use the bluetooth app on your smart phone. Quick connect base and flexible water/sand proof outer casing. Each whip comes with a 50 Cal flag and and swivel clip mounts. Add safety and visibility to your UTV, truck, Jeep, sand rail and more! Available in 4 and 6 foot lengths.

Be sure to choose whip length when ordering!

Polaris OEM Factory Replacement Seat Base 2634889 for RZR S 900/1000, XP1000, XP Turbo, Turbo S, General. This is a factory original equipment replacement for the seat bases that tend to crack and break over time. This seat base includes latch mechanism.  See below for fitment.

50 Caliber Racing Seat Belt Bypass Override Plug for Polaris RZR and Ranger UTVs 2015+. This simple device will override the factory speed limiter, allowing you to install an aftermarket harness for better safety and comfort. Installation could not be easier. No cutting or splicing required, just plug it in and go!

High quality 50 Caliber Racing backlit, single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. Waterproof casing makes it perfect for use in wet, sandy or dirty locations. LED Backlit Illumination with a custom etched design, guaranteed to put a smile on your face.

Be sure to choose color before ordering!

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser-etched sexy design "Whip Light". Dual LED illumination, rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to choose color before ordering!

50 Caliber Racing 180 Watt 30 inch curved LED light bar with spot/flood combo beam. Curved bars offer a better beam pattern and more closely match the roof line of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

50 Caliber Racing 3 inch LED Pod Lights are a great way to add some high powered auxiliary lighting to your car, truck, UTV, or any other vehicle. 18W output with Flood beam. These lights can withstand anything that you can throw at them: sand, desert heat, dirt, mud, monsoon rains, blizzard snow or any of mother nature's extreme fury.

50 Caliber Racing 120 Watt 20 inch curved LED light bar with spot/flood combo beam. Curved bars offer a better beam pattern and more closely match the roof line of most vehicles. Featuring 3 watt Cree bulbs and an IP68 waterproof housing for maximum performance and durability.

50 Caliber Racing 120 watt, 20 inch LED light bar. 40 Cree LED bulbs for an output of 7200+ lumens at 6000k, with minimal power draw at 12 volts. Flood and spot combo beam will illuminate everything in and around the forward path of your vehicle. Durable high impact housing with integral heatsink and polycarbonate lens. IP68 waterproof and dustproof rating for maximum protection. These light bars are powerful and very bright.

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser-etched design "This Switch Turns Something On" dad bod. Dual LED illumination, rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to choose color before ordering!

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser-etched funny design "Rock Lights" with guitar dude. Dual LED illumination, rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to select the correct color before ordering!

50 Caliber Racing ON/OFF Marine Grade Rocker Switch, LED Backlit with Custom Etched Sexy Girl Design - "Cooling Fans"

High quality 50 Caliber Racing backlit, single pole, single throw ON/OFF rocker switch, a 20 amp switch for 12 or 24 volt system. A Waterproof casing makes it perfect for use in wet, sandy or dirty locations. LED Backlit Illumination with a custom etched design, guaranteed to put a smile on your face.

Be sure to choose color before ordering!

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser-etched sexy design "The Shocker". Dual LED illumination, rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to choose color before ordering!

High quality 50 Caliber Racing backlit SPST ON/OFF rocker switch with a custom laser-etched sexy design "Rear Lights". Dual LED illumination, rated for 12 Volts and 20 Amps. These waterproof, durable switches are perfect for your boat, car, truck, sand rail or UTV!

Be sure to choose color before ordering!