1/2" Rod End Kit for 1" OD Tube - LHT & RHT Heim Joints

50 Caliber Racing Single Link 1/2 Rod End Kit - LHT and RHT 1/2"x1/2" Chromoly Heim Joints with Bungs for 1" OD Tube, .095 or .120 Wall


Single link 1/2" rod end kit including a LHT & RHT heim joint, jam nuts, and weld in bung adapters. Fits 1" OD tubing with wall thickness of .095 or .120. Heim joints are 1/2 thread, 1/2 bore, 4130 Chromoly steel, with a nylon/teflon (PTFE) liner. Perfect size for custom linkage and suspension arms for UTVs. Available with or without misalignment spacers.

Includes:
- (1) 1/2-20 x 1/2 Heim Joints - RH Thread
- (1) 1/2-20 x 1/2 Heim - LH Thread
- (1) RH Jam Nut
- (1) LH Jam Nut
- (1) RH Weld in Bung (tubing adapter)
- (1) LH Weld in Bung (tubing adapter)

Optional:
- (4) High Misalignment Spacers

Specifications:

Heim Joints:
- 4130 Chromoly Steel, Nylon / Teflon (PTFE) Liner
- Static radial load rating: 16,238 lb
- Thread pitch: 1/2"-20
- Bore: 1/2"
- Ball end diameter: 1.312"
- Socket width: .500"
- Ball width: .625"
- Center line length: 2.438"

Bungs:
- Thread: Female 1/2"-20
- Material: Chromoly Steel
- Thread Length: Full length
- Choose from 2 different tube sizes:
    1" OD x .095 Wall x 0.81" ID
    1" OD x .120 Wall x 0.76" ID

Misalignment Spacers (optional)
- Material: Chromoly Steel
- Surface finish: Zinc plated
- .375" ID x .499" OD x .500" W
- Compatible with 3/8" bolt size
- Total assembled width with HMS spacers: 1.375"

Perfect for fabricating custom suspension and steering links on your 4x4, sand rail, hot rod, race car, utv and more!

- Panhard bar / Trackbar
- Drag link
- Hi steer components
- Radius rods
- Sway bar links
- Tie rods
- Control arms
- 4 Link setups
- Custom Mounts