Chinese Pit Bikes

14 tooth Sprocket made for a 420 chain. The shaft opening size is a 20mm opening to the outside walls. Bolt holes are 34mm eye to eye. This sprocket will fit ATVs, pit bikes, and many other applications.

15 tooth Sprocket made for a 420 chain. The shaft opening size is a 20mm opening to the outside walls. The bolt holes are 34 mm center to center. This sprocket will fit ATV's, pit bikes, go karts, and many other applications.

15 tooth sprocket made for a 428 chain. The shaft opening size is a 20mm opening to the outside walls. The bolt holes are 34 mm center to center. This sprocket will fit ATV's, pit bikes, buggy's go karts, and many other applications.

Fuel Line by the Foot- 3/8 fuel line. This fuel line has an 3/16 inch ID and 3/8" OD.

15 tooth sprocket fits a 428 chain and has a 17 mm inner shaft hole.

50 Caliber Racing Performance Mesh Air Filter for CRF50 XR50 Pit Bikes. Performance mesh air filter fits all carburetors with a 1" OD round inlet. This filter will fit stock and aftermarket carburetors for XR50 and CRF50 Pit Bikes. Engine will be able to breathe better, giving you more airflow, and more power. If you are running an aftermarket pipe this filter is recommended for maximum performance. Will fit most carburetors that have a 1" inlet.

14 tooth sprocket fits a 420 chain and has a 17 mm inner shaft hole.

15 tooth sprocket fits a 420 chain and has a 17 mm inner shaft hole.

13 tooth sprocket fits a 420 chain and has a 20 mm inner shaft hole.

1.25 inch black foam filter (32mm)

50 Caliber Racing 1.35" Performance Air Filter. This will fit any carburetor that has a 32mm, 33mm 34mm, 35mm, or 36mm diameter filter side. Better air flow than stock filter means more power, and it is washable.

Bottom End Case Gaskets for 1992-up Honda 50 and Chinese clone engines.

50 Caliber Racing 52mm Gasket kit for 110cc and 125cc Lifan Engines Pit Bikes Atv Pocket Bike Go Karts and Mini Choppers

Set of 2 pit bike rims, in 10 inch diameter size with 28 spoke holes. High quality 6061 Aluminum, 2" wide outside to outside. Includes 2 sets of 28 heavy duty spokes, enough to lace up one set of 10" wheels for your CRF50 pit bike. Available in BLACK, GOLD, RED or BLUE anodized finish. Fits CRF and XR 50 Pit Bikes, and anything else that requires a 10 inch wheel with 28 spokes.

Be sure to select color before ordering!

50 Caliber Racing 47mm Head Gasket Kit for 70cc Pit Bikes. OEM quality head gasket kit, for 70cc Lifan and Honda Pit Bikes with 47mm piston. Use for an engine rebuild or keep in the garage for spare parts, this a great kit to have on hand.

50 Caliber Racing 52mm Head Gasket Kit for Chinese Lifan 110cc and 125cc Pit Bike and ATV Engines

50 Caliber Racing 20mm performance intake for Honda XR50 CRF50 XR70 CRF70 pit bikes. This intake is required when upgrading to a larger than stock carburetor (15mm and up). Angled slightly to the side, rather than straight back like stock. This will allow you to fit a larger carb and filter.

High flow aluminum body inline fuel filter with 1/4" flanges from ScooterX. Two piece design with replaceable filter cartridge for easy maintenance while handling high fuel flow rates. Anodized finish available in four colors: Gold, Silver, Black and Red. Fits all 50 - 110cc Dirt Bikes and will also work on Go Karts, Scooters, Lawn Mowers, Pressure Washers and more!

Be sure to select color before ordering!

50 Caliber Racing Replacement Gas Tank For 110cc - 125cc Chinese Pit Bikes. Will fit many 110 - 125cc Chinese Pit Bikes from the following manufacturers. TAOTAO, APO, X-PRO, COOLSTER, PITSTER, SYX, MOTO, APOLLO, SSR MOTORSPORTS AND MANY MORE. Just make sure your existing tank matches the photos above!

50 Caliber Racing 5 pin CDI Rev Box for use with most common 50cc - 125cc Chinese made pit bikes, ATV engines, Roketa, and others. If you have a China made pit bike or small ATV, and your CDI plug looks the same as pictured, it will work with your machine.

50 Caliber Racing 47mm Head Gasket and Clutch Gasket Kit for 70cc Pit Bikes. OEM quality head gasket kit, for 70cc Lifan and Honda Pit Bikes with 47mm piston. Use for an engine rebuild or keep in the garage for spare parts, this a great kit to have on hand.

50 Caliber Racing Forged Aluminum Gear Shift Lever For CRF50 XR50 CRF70 XR70 and Other Pit Bikes. Forged aluminum gear shift lever for pit bikes and atvs. Forged from 6061-T6 aluminum, with anodized coating. This is a perfect way to replace your original damaged or worn gear lever, which will restore gear shifting performance for your motorcycle. Fits almost all models of motorcycle, ATV, dirt bikes and pit bikes. Available in blue, red, silver and black.

Be sure to choose color before ordering!

50 Caliber Racing Billet Twist Throttle for 7/8" Bars on Pit Bikes and other Dirt Bikes. Available in several colors. See below for more information.

Be sure to choose color before ordering!

50 Caliber Racing oversized foot pegs for Honda and Chinese knock off pit bikes. Includes both right and left pegs. Oversize for a larger foot platform and solid aluminum for lightweight strength. They offer better stability and more room for larger riders. Available in several colors. Available in silver, red and black.

Be sure to choose color before ordering!