{"title":"USA Made Billet Tie Rods","description":"\u003cdiv class=\"category-top-desc\"\u003e\n\u003cp\u003eCNC billet tie rods for Polaris RZR, General, RS1, Can-Am X3 \u0026amp; Arctic Cat Wildcat\u003c\/p\u003e\n\u003cp\u003eStronger steering that holds up where stock tie rods bend and fail\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"rzr-xp-1000-billet-tie-rods","title":"Heavy Duty Billet Tie Rods - Polaris RZR XP 1000","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Billet Tie Rod Kit for RZR XP1000\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMachined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated Chromoly Heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your Polaris RZR, you need our heavy duty tie rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRZR XP 1000 Billet Tie Rods Kit includes:\u003c\/strong\u003e\u003cbr\u003e- (2) 1.125 Billet Tie rods (Left and Right)\u003cbr\u003e- (4) 5\/8\" Heat Treated 4130 Chromoly Heim joints\u003cbr\u003e- (2) Stainless steel clevis yoke ends with bolts\u003cbr\u003e- (4) High Misalignment Spacers\u003cbr\u003e- (2) Shoulder Bolts with lock nuts\u003cbr\u003e- Available with black powdercoat or raw (no finish)\u003cbr\u003e- 50 Caliber Racing logo CNC Engraved on one rod\u003cbr\u003e- 1 Year Warranty (excludes normal wear and tear to Heim joints)\u003cbr\u003e- Simple bolt on installation with no modifications needed\u003cbr\u003e- Includes a free can cooler! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2 \u0026amp; 4 Seat Polaris RZR models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit # TR1000 \/ 5318A1\u003c\/strong\u003e:\u003cbr\u003e- XP1000 (2014)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit # TR1000B \/ 5318A2:\u003c\/strong\u003e\u003cbr\u003e- XP1000 (2015-2017.5) *see note below\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit # TR100017 \/ 5318A3:\u003c\/strong\u003e\u003cbr\u003e- XP1000 (2017.5-2019) *see note below\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Notes:\u003c\/strong\u003e\u003cbr\u003e- Polaris changed steering rack bolts from 14mm to 16mm bolts midway through 2017. If your bolts are 16mm, you will need to order the 2017+ kit. (TR100017). \u003cbr\u003e- \u003cstrong\u003eThere is a difference between years,\u003c\/strong\u003e so make sure you specify year and model before ordering! \u003cbr\u003e- 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eWhy do I need these rods? \u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003ePolaris factory tie rods are the weakest link in the front suspension. If you are an aggressive driver, they tend to bend or break which can cause an accident and\/or extensive damage to your RZR. Spend a little now, save a lot later.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver \/ 2014","offer_id":49236911751425,"sku":"TR1000","price":219.0,"currency_code":"USD","in_stock":false},{"title":"Black \/ 2014","offer_id":49236911784193,"sku":"5318A1","price":234.0,"currency_code":"USD","in_stock":false},{"title":"Black \/ 2015-2016","offer_id":49236911816961,"sku":"5318A2","price":234.0,"currency_code":"USD","in_stock":false},{"title":"Raw Silver \/ 2017 - up","offer_id":49236911849729,"sku":"TR100017","price":239.0,"currency_code":"USD","in_stock":false},{"title":"Black \/ 2017 - up","offer_id":49236911882497,"sku":"5318A3","price":254.0,"currency_code":"USD","in_stock":false},{"title":"Raw Silver \/ 2015-2016","offer_id":49236911915265,"sku":"TR1000B","price":219.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/5052.jpg?v=1780795259"},{"product_id":"rzr-xp900-heavy-duty-tie-rods","title":"Heavy Duty Billet Tie Rods - Polaris RZR XP 900","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Tie Rod Kit Polaris RZR XP900 (fits 2 \u0026amp; 4 seat models)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e Machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated chromoly heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your RZR, you need our heavy duty tie rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e - (2) 1.125 Billet Tie rods (Left and Right)\u003cbr\u003e - (4) 5\/8\" Heat Treated 4130 Chromoly heim joints\u003cbr\u003e - (2) Stainless steel clevis yoke ends\u003cbr\u003e - (4) High Misalignment Spacers\u003cbr\u003e - (2) Shoulder Bolts with lock nuts\u003cbr\u003e - Available with black powdercoat or raw (no finish)\u003cbr\u003e - 50 Caliber Racing logo CNC Engraved on one rod\u003cbr\u003e - 1 Year Warranty (excludes normal wear and tear to heim joints)\u003cbr\u003e - Simple bolt on installation with no modifications needed\u003cbr\u003e - Includes a free can cooler! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2 \u0026amp; 4 seat models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e - RZR XP900 (2011-2013)\u003cbr\u003e - RZR 4 XP900 (2011-2013) \u003cbr\u003e\u003cbr\u003e NOTE - 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots. \u003cbr\u003e\u003cbr\u003e \u003cem\u003eWhy do I need these?\u003c\/em\u003e\u003cbr\u003e Polaris factory tie rods are not strong at all. If you are an agressive driver, they will bend then break and cause extensive damage to your RZR. Spend a little now, save a lot later.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236911948033,"sku":"TR900","price":219.0,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":49236911980801,"sku":"5318A4","price":234.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/2141.jpg?v=1780795311"},{"product_id":"wildcat-heavy-duty-billet-tie-rods-arctic-cat-textron","title":"Heavy Duty Billet Tie Rods - Arctic Cat Wildcat","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Billet Tie Rods - Arctic Cat Textron Wildcat\u003cstrong\u003e 2 \u0026amp; 4 Seat\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e50 Caliber Racing Tie Rods are machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated chromoly heim joints. The rods are 1.25\" diameter for extreme duty and they are as stout as it gets. The weak OEM tie rods are prone to failure under tough trail conditions, however our Tie Rods are significantly stronger and are designed for racing, extreme jumping, high speed whoops and all other abusive driving styles that you can dish out. If you want a bulletproof setup on your Wildcat, you'll need our heavy duty tie rods! Available with black powdercoat finish or raw (no finish).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e- (2) Billet Tie Rods (left and right)\u003cbr\u003e- (4) Chromoly Heim Joints with jam nuts\u003cbr\u003e- (8) High Misalignment Spacers\u003cbr\u003e- (2) Nyloc Nuts\u003cbr\u003e- (2) Shoulder Bolts\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- 1.25\" Diameter Solid Billet Aluminum\u003cbr\u003e\u003cspan\u003e- 5\/8\" 4130 Chromoly Heim Joints\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 50 Caliber Racing Logo CNC engraved on one rod\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cspan\u003e- Available with black powdercoat or raw (no finish)\u003c\/span\u003e\u003cbr\u003e- Designed for extreme duty\u003c\/span\u003e\u003cbr\u003e- 1 Year Warranty (normal wear and tear to heims is not covered under warranty)\u003cbr\u003e- Simple installation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits the following 2 \u0026amp; 4 seat models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eARCTIC CAT \/ TEXTRON\u003cbr\u003e\u003cbr\u003eWildcat 1000 (2012-2019) * DOES NOT fit Trail, Sport, or XX models\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236912046337,"sku":"TRW1000","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":49236912079105,"sku":"TRW1000B","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7654.jpg?v=1780795351"},{"product_id":"heavy-duty-billet-tie-rods-rzr-s900-s1000","title":"Heavy Duty Billet Tie Rods - RZR S 900 \/ 1000","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Billet Tie Rod Kit for \u003cstrong\u003ePolaris RZR S 900, S 1000\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMachined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated chromoly Heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your Polaris RZR, you need our heavy duty tie rods!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e- (2) 1.125 Billet Tie rods (Left and Right)\u003cbr\u003e- (4) 5\/8\" Heat Treated 4130 Chromoly Heim joints\u003cbr\u003e- (2) Stainless steel clevis yoke ends\u003cbr\u003e- (4) High Misalignment Spacers\u003cbr\u003e- (2) Shoulder Bolts with lock nuts\u003cbr\u003e- Available in black powdercoat or raw (no finish)\u003cbr\u003e- 50 Caliber Racing logo CNC Engraved on one rod\u003cbr\u003e- 1 Year Warranty (excludes normal wear and tear to Heim joints)\u003cbr\u003e- Simple bolt on installation with no modifications needed\u003cbr\u003e- Includes a free can cooler! \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2 \u0026amp; 4 Seat Polaris models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- RZR S 900 (2015-2026)\u003cbr\u003e- RZR S 1000 (2016-2026)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots.\u003cbr\u003e\u003cbr\u003e\u003cem\u003eWhy do I need these rods? \u003c\/em\u003e\u003cbr\u003e\u003cspan\u003ePolaris factory tie rods are the weakest link in the front suspension. If you are an aggressive driver, they tend to bend or break which can cause an accident and\/or extensive damage to your RZR. Spend a little now, save a lot later.\u003c\/span\u003e\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236912308481,"sku":"TRG1000-S900","price":219.0,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":49236912341249,"sku":"5318A5-S900","price":234.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/5345.jpg?v=1780795406"},{"product_id":"can-am-x3-heavy-duty-tie-rods","title":"Heavy Duty Billet Tie Rods - Can-Am Maverick X3","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Can-Am X3 Heavy Duty Tie Rod Kit (fits 2 \u0026amp; 4 seat models)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e Machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated, Teflon lined Chromoly Heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your X3, you need our heavy duty tie rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e - (2) 1.125 Billet Tie rods (Left and Right)\u003cbr\u003e - (2) 5\/8\" Heat Treated 4130 Chromoly Heim joints with Teflon liner\u003cbr\u003e - (2) Jam nuts\u003cbr\u003e - (4) High Misalignment Spacers\u003cbr\u003e - 50 Caliber Racing logo CNC Engraved on one rod\u003cbr\u003e - Available with black powdercoat or raw (no finish)\u003cbr\u003e - 1 Year Warranty (excludes normal wear and tear to Heim joints)\u003cbr\u003e - Simple bolt on installation with no modifications needed\u003cbr\u003e - Includes a free can cooler! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2016-Up Can-Am Maverick X3 models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Make sure you verify which model and width you have before ordering! \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e 64\" Wide Models:\u003c\/strong\u003e\u003cbr\u003e - X3 900 HO \u003cbr\u003e - X3 Turbo\u003cbr\u003e - X3 Turbo R\u003cbr\u003e - X3 X DS Turbo R\u003cbr\u003e - X3 X RC Turbo\u003cbr\u003e - X3 X MR Turbo\u003cbr\u003e - X3 MAX Turbo\u003cbr\u003e - X3 MAX Turbo R \u003cbr\u003e - X3 MAX X DS Turbo R\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e72\" Wide Models:\u003c\/strong\u003e\u003cbr\u003e - X3 MAX X RS Turbo R\u003cbr\u003e - X3 X RS Turbo R\u003cbr\u003e - X3 X RC Turbo R\u003cbr\u003e - X3 X MR Turbo R\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES:\u003cbr\u003e \u003c\/strong\u003e- There are 2 different widths, and they are not interchangeable! If you do not know which model you have, you can measure the track width. It should be either 64\" or 72\" on stock wheel backspacing.\u003cbr\u003e - 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\u003cem\u003eWhy do I need these rods? \u003c\/em\u003e\u003cbr\u003e Can-am factory tie rods are the weakest link in the front suspension. If you are an aggressive driver, they tend to bend or break which can cause an accident and\/or extensive damage to your X3. Spend a little now, save a lot later.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver \/ 64\" Wide","offer_id":49236912374017,"sku":"5318A6","price":230.0,"currency_code":"USD","in_stock":true},{"title":"Raw Silver \/ 72\" Wide","offer_id":49236912439553,"sku":"5318A7","price":230.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 64\" Wide","offer_id":49236912406785,"sku":"5318A8","price":245.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 72\" Wide","offer_id":49236912472321,"sku":"5318A9","price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/5464.jpg?v=1780795452"},{"product_id":"rzr-turbo-s-heavy-duty-tie-rods","title":"Heavy Duty Billet Tie Rods - Polaris RZR Turbo S","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty CNC Billet Tie Rod Kit for RZR Turbo S (2018-2022)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMachined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated Chromoly Heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your Polaris RZR, you need our heavy duty tie rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e- (2) 1.125 Billet Tie rods (21 3\/8\" Long)\u003cbr\u003e- (4) 5\/8\" Heat Treated 4130 Chromoly Heim joints (2 left, 2 right hand thread)\u003cbr\u003e- (2) Stainless steel clevis yoke ends with 16mm bolts (inner tie rod ends)\u003cbr\u003e- (4) High Misalignment Spacers with bolts and lock nuts (12mm)\u003cbr\u003e- (2) Shoulder Bolts (15mm)\u003cbr\u003e- Available with black powdercoat or raw (no finish)\u003cbr\u003e- 50 Caliber Racing logo engraved on one rod\u003cbr\u003e- 1 Year Warranty (excludes normal wear and tear to Heim joints)\u003cbr\u003e- Simple bolt on installation with no modifications needed\u003cbr\u003e- Includes a free can cooler! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2 \u0026amp; 4 Seat Polaris RZR models:\u003c\/strong\u003e\u003cbr\u003e- RZR TURBO S (2018-2022) * fits 72\" Wide models only\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots. \u003cbr\u003e\u003cbr\u003e\u003cem\u003eWhy do I need these rods? \u003c\/em\u003e\u003cbr\u003ePolaris factory tie rods are the weakest link in the front suspension. If you are an aggressive driver, they tend to bend or break which can cause an accident and\/or extensive damage to your RZR. Spend a little now, save a lot later.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236912505089,"sku":"5318A10","price":249.0,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":49236912537857,"sku":"5318A11","price":264.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6375.jpg?v=1780795486"},{"product_id":"rzr-xp-turbo-billet-tie-rods","title":"Heavy Duty Billet Tie Rods - Polaris RZR XP Turbo","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Billet Tie Rod Kit for RZR XP Turbo\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMachined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated chromoly heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your Polaris RZR, you need our heavy duty tie rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRZR XP Turbo Billet Tie Rods Kit includes:\u003c\/strong\u003e\u003cbr\u003e- (2) 1.125 Billet Tie rods (Left and Right)\u003cbr\u003e- (4) 5\/8\" Heat Treated 4130 Chromoly heim joints\u003cbr\u003e- (2) Stainless steel clevis yoke ends\u003cbr\u003e- (4) High Misalignment Spacers\u003cbr\u003e- (2) Shoulder Bolts with lock nuts\u003cbr\u003e- Available with black powdercoat or raw (no finish)\u003cbr\u003e- 50 Caliber Racing logo CNC Engraved on one rod\u003cbr\u003e- 1 Year Warranty (excludes normal wear and tear to heim joints)\u003cbr\u003e- Simple bolt on installation with no modifications needed\u003cbr\u003e- Includes a free can cooler! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2 \u0026amp; 4 Seat Polaris RZR models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit # TR1000B:\u003c\/strong\u003e\u003cbr\u003e- XP Turbo (2016) *see note below\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit # TR100017:\u003c\/strong\u003e\u003cbr\u003e- XP Turbo (2017-2021) * see note below\u003cbr\u003e\u003cbr\u003eNotes:\u003cbr\u003e- Polaris changed from 10mm to 12mm bolts midway through 2017. If your bolts are 12mm, you will need to order kit # TR100017. \u003cbr\u003e- \u003cstrong\u003eThere is a difference between years,\u003c\/strong\u003e so make sure you specify year and model before ordering!\u003cbr\u003e- 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots.\u003cbr\u003e\u003cbr\u003e\u003cem\u003eWhy do I need these rods? \u003c\/em\u003e\u003cbr\u003ePolaris factory tie rods are the weakest link in the front suspension. If you are an aggressive driver, they tend to bend or break which can cause an accident and\/or extensive damage to your RZR. Spend a little now, save a lot later.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Black \/ 2015-2017","offer_id":49236912603393,"sku":"5318A2-XPT","price":234.0,"currency_code":"USD","in_stock":false},{"title":"Raw Silver \/ 2015-2017","offer_id":49236912636161,"sku":"TR1000B-XPT","price":219.0,"currency_code":"USD","in_stock":false},{"title":"Raw Silver \/ 2017 - up","offer_id":49236912668929,"sku":"TR100017-XPT","price":239.0,"currency_code":"USD","in_stock":false},{"title":"Black \/ 2017 - up","offer_id":49236912701697,"sku":"5318A3-XPT","price":254.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7665.jpg?v=1780795526"},{"product_id":"billet-tie-rods-for-polaris-rs1","title":"Heavy Duty Billet Tie Rods - Polaris RZR RS1","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Billet Tie Rod Kit for RZR RS1\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMachined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated chromoly heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your Polaris RZR, you need our heavy duty tie rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e- (2) 1.125 Billet Tie rods (Left and Right)\u003cbr\u003e- (4) 5\/8\" Heat Treated 4130 Chromoly heim joints\u003cbr\u003e- (2) Stainless steel clevis yoke ends\u003cbr\u003e- (4) High Misalignment Spacers\u003cbr\u003e- (2) Shoulder Bolts with lock nuts\u003cbr\u003e- Available with black powdercoat or raw (no finish)\u003cbr\u003e- 50 Caliber Racing logo, CNC Engraved\u003cbr\u003e- 1 Year Warranty (excludes normal wear and tear to heim joints)\u003cbr\u003e- Simple bolt on installation with no modifications needed\u003cbr\u003e- Includes a free can cooler! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following Polaris RZR models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- RS1 (2018-2019)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots. \u003cbr\u003e\u003cbr\u003e\u003cem\u003eWhy do I need these rods? \u003c\/em\u003e\u003cbr\u003ePolaris factory tie rods are the weakest link in the front suspension. If you are an aggressive driver, they tend to bend or break which can cause an accident and\/or extensive damage to your RZR. Spend a little now, save a lot later.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236912767233,"sku":"TR1000B-RS1","price":219.0,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":49236912800001,"sku":"5318A2-RS1","price":234.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7679.jpg?v=1780795572"},{"product_id":"heavy-duty-billet-tie-rods-polaris-general","title":"Heavy Duty Billet Tie Rods - Polaris General","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Billet Tie Rod Kit for \u003cstrong\u003ePolaris General (fits 2 \u0026amp; 4 seat models)\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMachined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated chromoly Heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your Polaris UTV, you need our heavy duty tie rods!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e- (2) 1.125 Billet Tie rods (Left and Right)\u003cbr\u003e- (4) 5\/8\" Heat Treated 4130 Chromoly Heim joints\u003cbr\u003e- (2) Stainless steel clevis yoke ends\u003cbr\u003e- (4) High Misalignment Spacers\u003cbr\u003e- (2) Shoulder Bolts with lock nuts\u003cbr\u003e- Available in black powdercoat or raw (no finish)\u003cbr\u003e- 50 Caliber Racing logo CNC Engraved on one rod\u003cbr\u003e- 1 Year Warranty (excludes normal wear and tear to Heim joints)\u003cbr\u003e- Simple bolt on installation with no modifications needed\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2 \u0026amp; 4 Seat Polaris models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- General (2016-2025) * does not fit XP models\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: 50 Caliber Racing Heavy Duty Tie Rods require the re-use of the existing factory boots.\u003cbr\u003e\u003cbr\u003e\u003cem\u003eWhy do I need these rods? \u003c\/em\u003e\u003cbr\u003e\u003cspan\u003ePolaris factory tie rods are the weakest link in the front suspension. If you are an aggressive driver, they tend to bend or break which can cause an accident and\/or extensive damage to your RZR. Spend a little now, save a lot later.\u003c\/span\u003e\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"No finish (raw) \/ 2016-2018","offer_id":49236912865537,"sku":"TRG1000","price":219.0,"currency_code":"USD","in_stock":false},{"title":"No finish (raw) \/ 2019-2026","offer_id":49236912898305,"sku":"TRG1001","price":219.0,"currency_code":"USD","in_stock":false},{"title":"Black Powdercoat \/ 2016-2018","offer_id":49236912931073,"sku":"5318A5","price":234.0,"currency_code":"USD","in_stock":false},{"title":"Black Powdercoat \/ 2019-2026","offer_id":49236912963841,"sku":"5318A12","price":234.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/12151.jpg?v=1780795619"}],"url":"https:\/\/utvdude.com\/collections\/utv-tie-rods.oembed","provider":"UTV Dude","version":"1.0","type":"link"}