{"title":"UTV Suspension \u0026 Steering","description":"\u003cdiv class=\"category-top-desc\"\u003e\n\u003cp\u003eBillet tie rods, radius rods, ball joints, sway bar links \u0026amp; steering racks for UTVs \u0026amp; ATVs\u003c\/p\u003e\n\u003cp\u003eStronger steering and suspension upgrades built to outlast stock components\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"xp1000-cnc-billet-radius-rods","title":"Heavy Duty Billet Radius Rods - Polaris RZR XP 1000","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe factory radius rods are a weak point in the Polaris RZR XP 1000 rear suspension. When one fails, the damage can extend beyond the rod itself to the shock, trailing arm, frame tabs, and mounting holes.\u003c\/p\u003e\n\u003cp\u003e50 Caliber Racing heavy-duty radius rods replace those factory rods with solid 1.25\" 6061 billet aluminum construction and 3-piece 5\/8\" chromoly heim joints. Each rod is CNC machined in the USA and bolts directly in place of the stock rods with no modifications.\u003c\/p\u003e\n\u003cp\u003eThese rods have been repeatedly tested in BITD, WORCS, and the Mint 400 without a rod failure, including repeated jumps, high-speed whoops, and hard off-road use. Fits both 2-seat and 4-seat Polaris RZR XP 1000 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eRods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid 6061 billet aluminum, CNC machined\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.25\"\u003c\/li\u003e\n\u003cli\u003eCNC engraved logo on the upper rods\u003c\/li\u003e\n\u003cli\u003eFinish: raw or black powdercoat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joints:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\/8\" 3-piece rod end\u003c\/li\u003e\n\u003cli\u003eThread: Male 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eThread direction: one right hand and one left hand on each rod\u003c\/li\u003e\n\u003cli\u003eBody: 4130 chromoly steel, heat treated, zinc plated\u003c\/li\u003e\n\u003cli\u003eBall: 52100 bearing steel, heat treated, hard chrome plated\u003c\/li\u003e\n\u003cli\u003eRace: alloy steel, heat treated\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 17,995 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Solid 6061 billet aluminum radius rods: 2 upper and 2 lower\u003c\/li\u003e\n\u003cli\u003e(8) 5\/8\" heim joints with jam nuts (4 right hand thread, 4 left hand thread)\u003c\/li\u003e\n\u003cli\u003e(16) High misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-features\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eSolid billet rods, far stronger than stock\u003c\/li\u003e\n\u003cli\u003eTested in BITD, WORCS, and the Mint 400 without a rod failure\u003c\/li\u003e\n\u003cli\u003eUpgraded 3-piece chromoly heim joints\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on rods, 1 year warranty on heims (normal wear and tear to heims is not covered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-fitment\"\u003e\n\u003ch3\u003eSize and Fitment\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003e10mm bolt size (part numbers RR1000 \/ RR1000CB):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris RZR XP 1000 (2014-2016)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003e12mm bolt size (part numbers 5317A3 \/ 5317A4):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris RZR XP 1000 (2017.5-2023)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-note\"\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris changed the bolt size midyear in 2017. Bolt size must be verified before ordering.\u003c\/li\u003e\n\u003cli\u003e2014 through 2016 and some 2017 models use 10mm diameter bolts, which take a 15mm wrench.\u003c\/li\u003e\n\u003cli\u003e2017.5 and up models use 12mm diameter bolts, which take an 18mm wrench.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver \/ 2014-2016","offer_id":49236909555969,"sku":"RR1000","price":349.0,"currency_code":"USD","in_stock":true},{"title":"Raw Silver \/ 2017.5-2023","offer_id":49236909588737,"sku":"5317A3","price":349.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 2017.5-2023","offer_id":49236909621505,"sku":"5317A4","price":369.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 2014-2016","offer_id":49236909654273,"sku":"RR1000CB","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/9461.jpg?v=1780794813"},{"product_id":"rzr-xp900-heavy-duty-billet-radius-rods","title":"Heavy Duty Billet Radius Rods - Polaris RZR XP 900","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe factory radius rods are a weak point in the Polaris RZR XP 900 rear suspension. When one fails, the damage can extend beyond the rod itself to the shock, trailing arm, frame tabs, and mounting holes.\u003c\/p\u003e\n\u003cp\u003e50 Caliber Racing heavy-duty radius rods replace those factory rods with solid 1.25\" 6061 billet aluminum construction and 3-piece 5\/8\" chromoly heim joints. Each rod is CNC machined in the USA and bolts directly in place of the stock rods with no modifications.\u003c\/p\u003e\n\u003cp\u003eThese rods have been repeatedly tested in BITD, WORCS, and the Mint 400 without a rod failure, including repeated jumps, high-speed whoops, and hard off-road use. Fits both 2-seat and 4-seat Polaris RZR XP 900 models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eRods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid 6061 billet aluminum, CNC machined\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.25\"\u003c\/li\u003e\n\u003cli\u003eUpper rod length: 18 1\/4\"\u003c\/li\u003e\n\u003cli\u003eLower rod length: 21 1\/4\"\u003c\/li\u003e\n\u003cli\u003eCNC engraved logo on the lower rods\u003c\/li\u003e\n\u003cli\u003eFinish: raw or black powdercoat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joints:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\/8\" 3-piece rod end\u003c\/li\u003e\n\u003cli\u003eThread: Male 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eThread direction: one right hand and one left hand on each rod\u003c\/li\u003e\n\u003cli\u003eBody: 4130 chromoly steel, heat treated, zinc plated\u003c\/li\u003e\n\u003cli\u003eBall: 52100 bearing steel, heat treated, hard chrome plated\u003c\/li\u003e\n\u003cli\u003eRace: alloy steel, heat treated\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 17,995 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Solid 6061 billet aluminum radius rods: 2 upper and 2 lower\u003c\/li\u003e\n\u003cli\u003e(8) 5\/8\" heim joints with jam nuts (4 right hand thread, 4 left hand thread)\u003c\/li\u003e\n\u003cli\u003e(16) High misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-features\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eSolid billet rods, far stronger than stock\u003c\/li\u003e\n\u003cli\u003eTested in BITD, WORCS, and the Mint 400 without a rod failure\u003c\/li\u003e\n\u003cli\u003eUpgraded 3-piece chromoly heim joints\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on rods, 1 year warranty on heims (normal wear and tear to heims is not covered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-fitment\"\u003e\n\u003ch3\u003eSize and Fitment\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris RZR XP 900 (2011-2014)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236909785345,"sku":"RR900","price":349.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":49236909818113,"sku":"RR900CB","price":369.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/9456.jpg?v=1780794862"},{"product_id":"can-am-x3-cnc-billet-radius-rods","title":"Heavy Duty Billet Radius Rods - Can-Am Maverick X3","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe factory radius rods are a weak point in the Can-Am Maverick X3 rear suspension. When one fails, the damage can extend beyond the rod itself to the shock, trailing arm, frame tabs, and mounting holes.\u003c\/p\u003e\n\u003cp\u003e50 Caliber Racing heavy-duty radius rods replace those factory rods with solid 1.25\" 6061 billet aluminum construction and 3-piece 5\/8\" chromoly heim joints. Each rod is CNC machined in the USA and bolts directly in place of the stock rods with no modifications.\u003c\/p\u003e\n\u003cp\u003eThese rods have been repeatedly tested in BITD, WORCS, and the Mint 400 without a rod failure, including repeated jumps, high-speed whoops, and hard off-road use. Fits 64\" and 72\" wide Can-Am Maverick X3 and X3 Max models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eRods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid 6061 billet aluminum, CNC machined\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.25\"\u003c\/li\u003e\n\u003cli\u003eCNC engraved logo on the middle rods\u003c\/li\u003e\n\u003cli\u003eFinish: raw or black powdercoat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joints:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\/8\" 3-piece rod end\u003c\/li\u003e\n\u003cli\u003eThread: Male 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eThread direction: one right hand and one left hand on each rod\u003c\/li\u003e\n\u003cli\u003eBody: 4130 chromoly steel, heat treated, zinc plated\u003c\/li\u003e\n\u003cli\u003eBall: 52100 bearing steel, heat treated, hard chrome plated\u003c\/li\u003e\n\u003cli\u003eRace: alloy steel, heat treated\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 17,995 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(6) Solid 6061 billet aluminum radius rods: 2 upper, 2 middle, and 2 lower\u003c\/li\u003e\n\u003cli\u003e(12) 5\/8\" heim joints with jam nuts (6 right hand thread, 6 left hand thread)\u003c\/li\u003e\n\u003cli\u003e(24) High misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-features\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eSolid billet rods, far stronger than stock\u003c\/li\u003e\n\u003cli\u003eTested in BITD, WORCS, and the Mint 400 without a rod failure\u003c\/li\u003e\n\u003cli\u003eUpgraded 3-piece chromoly heim joints\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on rods, 1 year warranty on heims (normal wear and tear to heims is not covered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-fitment\"\u003e\n\u003ch3\u003eSize and Fitment\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eCan-Am Maverick X3 (2017+), 64\" wide models:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eX3 900 HO\u003c\/li\u003e\n\u003cli\u003eX3 Turbo\u003c\/li\u003e\n\u003cli\u003eX3 Turbo R\u003c\/li\u003e\n\u003cli\u003eX3 X DS Turbo R\u003c\/li\u003e\n\u003cli\u003eX3 X RC Turbo\u003c\/li\u003e\n\u003cli\u003eX3 X MR Turbo\u003c\/li\u003e\n\u003cli\u003eX3 Max Turbo\u003c\/li\u003e\n\u003cli\u003eX3 Max Turbo R\u003c\/li\u003e\n\u003cli\u003eX3 Max X DS Turbo R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eCan-Am Maverick X3 (2017+), 72\" wide models:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eX3 X RS Turbo R\u003c\/li\u003e\n\u003cli\u003eX3 Max X RS Turbo R\u003c\/li\u003e\n\u003cli\u003eX3 X RC Turbo R\u003c\/li\u003e\n\u003cli\u003eX3 X MR Turbo R\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-note\"\u003e\n\u003ch3\u003eImportant Note\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eVerify your model and width (64\" or 72\") before ordering. Sets are not interchangeable.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver \/ 64\" Wide","offer_id":49236909916417,"sku":"RRX364C","price":439.0,"currency_code":"USD","in_stock":true},{"title":"Raw Silver \/ 72\" Wide","offer_id":49236909949185,"sku":"RRX372C","price":439.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 64\" Wide","offer_id":49236910014721,"sku":"RRX364CB","price":479.0,"currency_code":"USD","in_stock":false},{"title":"Black \/ 72\" Wide","offer_id":49236909981953,"sku":"RRX372CB","price":479.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/11028.jpg?v=1780794914"},{"product_id":"xp1000-turbo-rs1-heavy-duty-rear-plate","title":"XP1000, Turbo \u0026 RS1 Heavy Duty Rear Plate","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Rear Plate for Polaris RZR XP1000, Turbo and RS1 (fits 1, 2 \u0026amp; 4 seat models)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e Do you like to drive aggressively? Toss that thin, flexy, stamped stock rear plate and replace it with our heavy duty radius arm plate. Our custom plate adds stiffness and strength to the rear suspension mounting points of your RZR. You will have a more stable, predictable ride with sure footed control when mobbing over whoops, jumps, high speed turns and any other extreme driving conditions. Made from 1\/8 thick steel plate, with drain plug access and decorative logo. Get it in raw with no finish and build a bumper or roll cage from it, or in black powdercoat if you just want to stiffen up rear suspension. No modifications are necessary to install, and compatible with OEM and aftermarket radius rods. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e - Made from 1\/8\" thick steel plate\u003cbr\u003e - Access hole for differential drain plug\u003cbr\u003e - 50 Cal logo\u003cbr\u003e - Choose raw finish for fabbing bumper\/cage or black powdercoat\u003cbr\u003e - Easy bolt on installation\u003cbr\u003e - No modifications required\u003cbr\u003e - Compatible with OEM and aftermarket radius rods\u003cbr\u003e - Race inspired design\u003cbr\u003e - 100% Hand made in the USA!\u003cbr\u003e - Free can cooler included (randomly selected from several awesome designs)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following Polaris models (fits 1, 2 \u0026amp; 4 seat models):\u003c\/strong\u003e\u003cbr\u003e - RZR XP1000 (2014-2023)\u003cbr\u003e - RZR XP Turbo (2015-2022) Does not fit Turbo S Models\u003cbr\u003e - RS1 (2018-2020)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e There is a difference between years, so make sure you specify year from drop down before ordering! If you don't know your year, measure the radius rod bolt diameter. 2014-2016 uses 10mm, 2017 - up uses 12mm bolts.\u003cbr\u003e\u003cbr\u003e\u003cem\u003eWhy do I need this?\u003c\/em\u003e\u003cbr\u003e The factory rear plate is made from thin stamped steel. It has a tendency to flex under aggressive driving conditions, which can negatively affect alignment and stability in corners, jumps, and off camber driving. At best this can decrease your driving experience and at worst can contribute to an accident or damage to your RZR. Spend a little now, save a lot later.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"No finish (raw) \/ 2014-2016","offer_id":49236910113025,"sku":"5376F2","price":39.0,"currency_code":"USD","in_stock":true},{"title":"No finish (raw) \/ 2017 - up","offer_id":49236910145793,"sku":"5376F4","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Black Powdercoat \/ 2014-2016","offer_id":49236910178561,"sku":"5376F1","price":39.0,"currency_code":"USD","in_stock":true},{"title":"Black Powdercoat \/ 2017 - up","offer_id":49236910211329,"sku":"5376F3","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/5356.jpg?v=1780794953"},{"product_id":"rzr-rs1-heavy-duty-billet-radius-rods","title":"Heavy Duty Billet Radius Rods - Polaris RZR RS1","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe factory radius rods are a weak point in the Polaris RZR RS1 rear suspension. When one fails, the damage can extend beyond the rod itself to the shock, trailing arm, frame tabs, and mounting holes.\u003c\/p\u003e\n\u003cp\u003e50 Caliber Racing heavy-duty radius rods replace those factory rods with solid 1.25\" 6061 billet aluminum construction and 3-piece 5\/8\" chromoly heim joints. Each rod is CNC machined in the USA and bolts directly in place of the stock rods with no modifications.\u003c\/p\u003e\n\u003cp\u003eThese rods have been repeatedly tested in BITD, WORCS, and the Mint 400 without a rod failure, including repeated jumps, high-speed whoops, and hard off-road use. Fits the Polaris RZR RS1.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eRods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid 6061 billet aluminum, CNC machined\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.25\"\u003c\/li\u003e\n\u003cli\u003eCNC engraved logo on the upper rods\u003c\/li\u003e\n\u003cli\u003eFinish: raw or black powdercoat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joints:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\/8\" 3-piece rod end\u003c\/li\u003e\n\u003cli\u003eThread: Male 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eThread direction: one right hand and one left hand on each rod\u003c\/li\u003e\n\u003cli\u003eBody: 4130 chromoly steel, heat treated, zinc plated\u003c\/li\u003e\n\u003cli\u003eBall: 52100 bearing steel, heat treated, hard chrome plated\u003c\/li\u003e\n\u003cli\u003eRace: alloy steel, heat treated\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 17,995 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Solid 6061 billet aluminum radius rods: 2 upper and 2 lower\u003c\/li\u003e\n\u003cli\u003e(8) 5\/8\" heim joints with jam nuts (4 right hand thread, 4 left hand thread)\u003c\/li\u003e\n\u003cli\u003e(16) High misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-features\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eSolid billet rods, far stronger than stock\u003c\/li\u003e\n\u003cli\u003eTested in BITD, WORCS, and the Mint 400 without a rod failure\u003c\/li\u003e\n\u003cli\u003eUpgraded 3-piece chromoly heim joints\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on rods, 1 year warranty on heims (normal wear and tear to heims is not covered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-fitment\"\u003e\n\u003ch3\u003eSize and Fitment\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris RZR RS1 (2018-2019)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236910342401,"sku":"5317A3-RS1","price":349.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":49236910375169,"sku":"5317A4-RS1","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/9448.jpg?v=1780794991"},{"product_id":"rzr-turbo-s-cnc-billet-radius-rods","title":"Heavy Duty Billet Radius Rods - Polaris RZR Turbo S","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe factory radius rods are a weak point in the Polaris RZR Turbo S rear suspension. When one fails, the damage can extend beyond the rod itself to the shock, trailing arm, frame tabs, and mounting holes.\u003c\/p\u003e\n\u003cp\u003e50 Caliber Racing heavy-duty radius rods replace those factory rods with solid 1.25\" 6061 billet aluminum construction and 3-piece 5\/8\" chromoly heim joints. Each rod is CNC machined in the USA and bolts directly in place of the stock rods with no modifications.\u003c\/p\u003e\n\u003cp\u003eThese rods have been repeatedly tested in BITD, WORCS, and the Mint 400 without a rod failure, including repeated jumps, high-speed whoops, and hard off-road use. Fits both 2-seat and 4-seat Polaris RZR Turbo S models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eRods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid 6061 billet aluminum, CNC machined\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.25\"\u003c\/li\u003e\n\u003cli\u003eCNC engraved logo on the upper rods\u003c\/li\u003e\n\u003cli\u003eFinish: raw or black powdercoat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joints:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\/8\" 3-piece rod end\u003c\/li\u003e\n\u003cli\u003eThread: Male 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eThread direction: one right hand and one left hand on each rod\u003c\/li\u003e\n\u003cli\u003eBody: 4130 chromoly steel, heat treated, zinc plated\u003c\/li\u003e\n\u003cli\u003eBall: 52100 bearing steel, heat treated, hard chrome plated\u003c\/li\u003e\n\u003cli\u003eRace: alloy steel, heat treated\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 17,995 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Solid 6061 billet aluminum radius rods: 2 upper and 2 lower\u003c\/li\u003e\n\u003cli\u003e(8) 5\/8\" heim joints with jam nuts (4 right hand thread, 4 left hand thread)\u003c\/li\u003e\n\u003cli\u003e(16) High misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-features\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eSolid billet rods, far stronger than stock\u003c\/li\u003e\n\u003cli\u003eTested in BITD, WORCS, and the Mint 400 without a rod failure\u003c\/li\u003e\n\u003cli\u003eUpgraded 3-piece chromoly heim joints\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on rods, 1 year warranty on heims (normal wear and tear to heims is not covered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-fitment\"\u003e\n\u003ch3\u003eSize and Fitment\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris RZR Turbo S (2018-2021) with 72\" wide suspension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePart numbers: 5217A1 (raw) \/ 5217A2 (black)\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-note\"\u003e\n\u003ch3\u003eImportant Note\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eThese rods are for 72\" wide machines. They do not fit XP Turbo or XP 1000 models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Black","offer_id":49236910964993,"sku":"5317A2","price":364.0,"currency_code":"USD","in_stock":true},{"title":"Raw Silver","offer_id":49236910997761,"sku":"5317A1","price":349.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/9443.jpg?v=1780795039"},{"product_id":"xp-turbo-cnc-billet-radius-rods","title":"Heavy Duty Billet Radius Rods - Polaris RZR XP Turbo","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe factory radius rods are a weak point in the Polaris RZR XP Turbo rear suspension. When one fails, the damage can extend beyond the rod itself to the shock, trailing arm, frame tabs, and mounting holes.\u003c\/p\u003e\n\u003cp\u003e50 Caliber Racing heavy-duty radius rods replace those factory rods with solid 1.25\" 6061 billet aluminum construction and 3-piece 5\/8\" chromoly heim joints. Each rod is CNC machined in the USA and bolts directly in place of the stock rods with no modifications.\u003c\/p\u003e\n\u003cp\u003eThese rods have been repeatedly tested in BITD, WORCS, and the Mint 400 without a rod failure, including repeated jumps, high-speed whoops, and hard off-road use. Fits both 2-seat and 4-seat Polaris RZR XP Turbo models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eRods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid 6061 billet aluminum, CNC machined\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.25\"\u003c\/li\u003e\n\u003cli\u003eCNC engraved logo on the upper rods\u003c\/li\u003e\n\u003cli\u003eFinish: raw or black powdercoat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joints:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\/8\" 3-piece rod end\u003c\/li\u003e\n\u003cli\u003eThread: Male 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eThread direction: one right hand and one left hand on each rod\u003c\/li\u003e\n\u003cli\u003eBody: 4130 chromoly steel, heat treated, zinc plated\u003c\/li\u003e\n\u003cli\u003eBall: 52100 bearing steel, heat treated, hard chrome plated\u003c\/li\u003e\n\u003cli\u003eRace: alloy steel, heat treated\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 17,995 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Solid 6061 billet aluminum radius rods: 2 upper and 2 lower\u003c\/li\u003e\n\u003cli\u003e(8) 5\/8\" heim joints with jam nuts (4 right hand thread, 4 left hand thread)\u003c\/li\u003e\n\u003cli\u003e(16) High misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-features\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eSolid billet rods, far stronger than stock\u003c\/li\u003e\n\u003cli\u003eTested in BITD, WORCS, and the Mint 400 without a rod failure\u003c\/li\u003e\n\u003cli\u003eUpgraded 3-piece chromoly heim joints\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on rods, 1 year warranty on heims (normal wear and tear to heims is not covered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-fitment\"\u003e\n\u003ch3\u003eSize and Fitment\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003ePart numbers RR1000 \/ RR1000CB:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris RZR XP Turbo (2016)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePart numbers 5317A3 \/ 5317A4:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris RZR XP Turbo (2017-2021)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-note\"\u003e\n\u003ch3\u003eImportant Notes\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eThere is a difference between years, so select your model year before ordering.\u003c\/li\u003e\n\u003cli\u003eThese rods do not fit Turbo S models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver \/ 2016","offer_id":49236911259905,"sku":"RR1000-XPT","price":349.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 2016","offer_id":49236911292673,"sku":"RR1000CB-XPT","price":369.0,"currency_code":"USD","in_stock":true},{"title":"Raw Silver \/ 2017-2021","offer_id":49236911325441,"sku":"5317A3-XPT","price":349.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 2017-2021","offer_id":49236911358209,"sku":"5317A4-XPT","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/9438.jpg?v=1780795090"},{"product_id":"can-am-x3-heavy-duty-rear-plate","title":"Can-Am X3 Heavy Duty Rear Plate","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Rear Plate for \u003cstrong\u003eCan-Am X3 and X3 MAX\u003c\/strong\u003e (fits 2 \u0026amp; 4 seat models)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCan-am X3 models have a notoriously weak rear plate which is made from thin, flimsy stamped metal, and the factory holes are drilled way too large. Even mild off road driving can lead to wallowed out holes or rear suspension links tearing free from the car, leaving you stranded and stuck with hundreds of dollars worth of repairs. Do yourself a favor, toss it out and replace it with our beefy 1\/8\" thick steel plate with tighter bolt hole tolerance. Our rear plate design completely eliminates all of the flex of the stock piece, and provides much more stable, predictable handling. Made in the USA from cold rolled 1\/8” plate steel and finished with matte black powdercoat. No modifications are necessary to install, and it is compatible with OEM and aftermarket radius rods.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e - Made from 1\/8\" thick steel plate\u003cbr\u003e - Black powdercoat finish\u003cbr\u003e - Easy bolt on installation\u003cbr\u003e - No modifications required\u003cbr\u003e - Compatible with OEM and aftermarket radius rods\u003cbr\u003e - Race inspired design\u003cbr\u003e - 100% Hand made in the USA!\u003cbr\u003e - Free can cooler included (randomly selected from several awesome designs)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following CAN-AM models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e 2 Seaters:\u003c\/strong\u003e\u003cbr\u003e - X3 900 HO (2018-2021)\u003cbr\u003e - X3 Turbo, Turbo R (2018-2021)\u003cbr\u003e - X3 X RC Turbo, Turbo R (2018-2021)\u003cbr\u003e - X3 X DS Turbo R (2018-2021)\u003cbr\u003e - X3 X RS Turbo R (2018-2021)\u003cbr\u003e - X3 X MR Turbo R (2018-2021)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e4 Seaters:\u003c\/strong\u003e\u003cbr\u003e - X3 MAX Turbo, Turbo R (2018-2021)\u003cbr\u003e- X3 MAX X DS Turbo R (2018-2021)\u003cbr\u003e- X3 MAX X RS Turbo R (2018-2021) \u003cbr\u003e\u003cbr\u003e\u003cem\u003eWhy do I need this?\u003c\/em\u003e\u003cbr\u003e The factory rear plate is made from thin stamped steel and the holes are larger than they need to be. Our plate is thicker and has tighter hole tolerance. The stock plate will fail and leave you stranded. Upgrade now and save yourself the headache of being stranded and having to repair broken rear suspension parts.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236911522049,"sku":"5376F5","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6143.jpg?v=1780795136"},{"product_id":"rzr-pro-xp-cnc-billet-radius-rods","title":"Heavy Duty Billet Radius Rods - Polaris RZR Pro XP","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe factory radius rods are a weak point in the Polaris RZR Pro XP rear suspension. When one fails, the damage can extend beyond the rod itself to the shock, trailing arm, frame tabs, and mounting holes.\u003c\/p\u003e\n\u003cp\u003e50 Caliber Racing heavy-duty radius rods replace those factory rods with solid 1.25\" 6061 billet aluminum construction and 3-piece 5\/8\" chromoly heim joints. Each rod is CNC machined in the USA and bolts directly in place of the stock rods with no modifications.\u003c\/p\u003e\n\u003cp\u003eThese rods have been repeatedly tested in BITD, WORCS, and the Mint 400 without a rod failure, including repeated jumps, high-speed whoops, and hard off-road use. Fits both 2-seat and 4-seat Polaris RZR Pro XP models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eRods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid 6061 billet aluminum, CNC machined\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.25\"\u003c\/li\u003e\n\u003cli\u003eCNC engraved logo on the upper rods\u003c\/li\u003e\n\u003cli\u003eFinish: raw or black powdercoat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joints:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5\/8\" 3-piece rod end\u003c\/li\u003e\n\u003cli\u003eThread: Male 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eThread direction: one right hand and one left hand on each rod\u003c\/li\u003e\n\u003cli\u003eBody: 4130 chromoly steel, heat treated, zinc plated\u003c\/li\u003e\n\u003cli\u003eBall: 52100 bearing steel, heat treated, hard chrome plated\u003c\/li\u003e\n\u003cli\u003eRace: alloy steel, heat treated\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 17,995 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Solid 6061 billet aluminum radius rods: 2 upper and 2 lower\u003c\/li\u003e\n\u003cli\u003e(8) 5\/8\" heim joints with jam nuts (4 right hand thread, 4 left hand thread)\u003c\/li\u003e\n\u003cli\u003e(16) High misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-features\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eSolid billet rods, far stronger than stock\u003c\/li\u003e\n\u003cli\u003eTested in BITD, WORCS, and the Mint 400 without a rod failure\u003c\/li\u003e\n\u003cli\u003eUpgraded 3-piece chromoly heim joints\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on rods, 1 year warranty on heims (normal wear and tear to heims is not covered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-fitment\"\u003e\n\u003ch3\u003eSize and Fitment\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris RZR Pro XP (2020+)\u003c\/li\u003e\n\u003cli\u003ePolaris RZR Pro XP4 (2020+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-note\"\u003e\n\u003ch3\u003eImportant Note\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eFits Pro XP models only. Does not fit XP 1000 or XP Turbo models.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236911554817,"sku":"5317A5","price":349.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":49236911587585,"sku":"5317A6","price":369.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/8558.jpg?v=1780795165"},{"product_id":"rzr-pro-r-turbo-r-cnc-billet-radius-rods","title":"Heavy Duty Billet Radius Rods - Polaris RZR Pro R","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eThe factory radius rods are a weak point in the Polaris RZR Pro R and Turbo R rear suspension. When one fails, the damage can extend beyond the rod itself to the shock, trailing arm, frame tabs, and mounting holes.\u003c\/p\u003e\n\u003cp\u003e50 Caliber Racing heavy-duty radius rods replace those factory rods with solid 1.25\" 6061 billet aluminum construction and 3-piece 3\/4\" chromoly heim joints. Each rod is CNC machined in the USA and bolts directly in place of the stock rods with no modifications.\u003c\/p\u003e\n\u003cp\u003eThese rods have been repeatedly tested in BITD, WORCS, and the Mint 400 without a rod failure, including repeated jumps, high-speed whoops, and hard off-road use. Fits both 2-seat and 4-seat Polaris RZR Pro R and Turbo R models.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eRods:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSolid 6061 billet aluminum, CNC machined\u003c\/li\u003e\n\u003cli\u003eDiameter: 1.25\"\u003c\/li\u003e\n\u003cli\u003eCNC engraved logo on the upper rods\u003c\/li\u003e\n\u003cli\u003eFinish: raw or black powdercoat\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joints:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3\/4\" 3-piece rod end\u003c\/li\u003e\n\u003cli\u003eThread: Male 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eThread direction: one right hand and one left hand on each rod\u003c\/li\u003e\n\u003cli\u003eBody: 4130 chromoly steel, heat treated, zinc plated\u003c\/li\u003e\n\u003cli\u003eBall: 52100 bearing steel, heat treated, hard chrome plated\u003c\/li\u003e\n\u003cli\u003eRace: alloy steel, heat treated\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 28,081 lb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(4) Solid 6061 billet aluminum radius rods: 2 upper and 2 lower\u003c\/li\u003e\n\u003cli\u003e(8) 3\/4\" heim joints with jam nuts (4 right hand thread, 4 left hand thread)\u003c\/li\u003e\n\u003cli\u003e(16) High misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-features\"\u003e\n\u003ch3\u003eFeatures\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eSolid billet rods, far stronger than stock\u003c\/li\u003e\n\u003cli\u003eTested in BITD, WORCS, and the Mint 400 without a rod failure\u003c\/li\u003e\n\u003cli\u003eUpgraded 3-piece chromoly heim joints\u003c\/li\u003e\n\u003cli\u003eBolt-on install with no modifications needed\u003c\/li\u003e\n\u003cli\u003eMade in the USA\u003c\/li\u003e\n\u003cli\u003eLifetime warranty on rods, 1 year warranty on heims (normal wear and tear to heims is not covered)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-fitment\"\u003e\n\u003ch3\u003eSize and Fitment\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePolaris RZR Pro R (2022+)\u003c\/li\u003e\n\u003cli\u003ePolaris RZR Pro R 4 (2022+)\u003c\/li\u003e\n\u003cli\u003ePolaris RZR Turbo R (2022+)\u003c\/li\u003e\n\u003cli\u003ePolaris RZR Turbo R 4 (2022+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Black","offer_id":49236911653121,"sku":"5317A8","price":449.0,"currency_code":"USD","in_stock":true},{"title":"Raw Silver","offer_id":49236911685889,"sku":"5317A7","price":429.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/9592.jpg?v=1780795208"},{"product_id":"rzr-xp-1000-billet-tie-rods","title":"Heavy Duty Billet Tie Rods - Polaris RZR XP 1000","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Billet Tie Rod Kit for RZR XP1000\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMachined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated Chromoly Heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your Polaris RZR, you need our heavy duty tie rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRZR XP 1000 Billet Tie Rods Kit includes:\u003c\/strong\u003e\u003cbr\u003e- (2) 1.125 Billet Tie rods (Left and Right)\u003cbr\u003e- (4) 5\/8\" Heat Treated 4130 Chromoly Heim joints\u003cbr\u003e- (2) Stainless steel clevis yoke ends with bolts\u003cbr\u003e- (4) High Misalignment Spacers\u003cbr\u003e- (2) Shoulder Bolts with lock nuts\u003cbr\u003e- Available with black powdercoat or raw (no finish)\u003cbr\u003e- 50 Caliber Racing logo CNC Engraved on one rod\u003cbr\u003e- 1 Year Warranty (excludes normal wear and tear to Heim joints)\u003cbr\u003e- Simple bolt on installation with no modifications needed\u003cbr\u003e- Includes a free can cooler! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2 \u0026amp; 4 Seat Polaris RZR models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit # TR1000 \/ 5318A1\u003c\/strong\u003e:\u003cbr\u003e- XP1000 (2014)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit # TR1000B \/ 5318A2:\u003c\/strong\u003e\u003cbr\u003e- XP1000 (2015-2017.5) *see note below\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit # TR100017 \/ 5318A3:\u003c\/strong\u003e\u003cbr\u003e- XP1000 (2017.5-2019) *see note below\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Notes:\u003c\/strong\u003e\u003cbr\u003e- Polaris changed steering rack bolts from 14mm to 16mm bolts midway through 2017. If your bolts are 16mm, you will need to order the 2017+ kit. (TR100017). \u003cbr\u003e- \u003cstrong\u003eThere is a difference between years,\u003c\/strong\u003e so make sure you specify year and model before ordering! \u003cbr\u003e- 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eWhy do I need these rods? \u003c\/em\u003e\u003c\/strong\u003e\u003cbr\u003ePolaris factory tie rods are the weakest link in the front suspension. If you are an aggressive driver, they tend to bend or break which can cause an accident and\/or extensive damage to your RZR. Spend a little now, save a lot later.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver \/ 2014","offer_id":49236911751425,"sku":"TR1000","price":219.0,"currency_code":"USD","in_stock":false},{"title":"Black \/ 2014","offer_id":49236911784193,"sku":"5318A1","price":234.0,"currency_code":"USD","in_stock":false},{"title":"Black \/ 2015-2016","offer_id":49236911816961,"sku":"5318A2","price":234.0,"currency_code":"USD","in_stock":false},{"title":"Raw Silver \/ 2017 - up","offer_id":49236911849729,"sku":"TR100017","price":239.0,"currency_code":"USD","in_stock":false},{"title":"Black \/ 2017 - up","offer_id":49236911882497,"sku":"5318A3","price":254.0,"currency_code":"USD","in_stock":false},{"title":"Raw Silver \/ 2015-2016","offer_id":49236911915265,"sku":"TR1000B","price":219.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/5052.jpg?v=1780795259"},{"product_id":"rzr-xp900-heavy-duty-tie-rods","title":"Heavy Duty Billet Tie Rods - Polaris RZR XP 900","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Tie Rod Kit Polaris RZR XP900 (fits 2 \u0026amp; 4 seat models)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e Machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated chromoly heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your RZR, you need our heavy duty tie rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e - (2) 1.125 Billet Tie rods (Left and Right)\u003cbr\u003e - (4) 5\/8\" Heat Treated 4130 Chromoly heim joints\u003cbr\u003e - (2) Stainless steel clevis yoke ends\u003cbr\u003e - (4) High Misalignment Spacers\u003cbr\u003e - (2) Shoulder Bolts with lock nuts\u003cbr\u003e - Available with black powdercoat or raw (no finish)\u003cbr\u003e - 50 Caliber Racing logo CNC Engraved on one rod\u003cbr\u003e - 1 Year Warranty (excludes normal wear and tear to heim joints)\u003cbr\u003e - Simple bolt on installation with no modifications needed\u003cbr\u003e - Includes a free can cooler! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2 \u0026amp; 4 seat models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e - RZR XP900 (2011-2013)\u003cbr\u003e - RZR 4 XP900 (2011-2013) \u003cbr\u003e\u003cbr\u003e NOTE - 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots. \u003cbr\u003e\u003cbr\u003e \u003cem\u003eWhy do I need these?\u003c\/em\u003e\u003cbr\u003e Polaris factory tie rods are not strong at all. If you are an agressive driver, they will bend then break and cause extensive damage to your RZR. Spend a little now, save a lot later.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236911948033,"sku":"TR900","price":219.0,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":49236911980801,"sku":"5318A4","price":234.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/2141.jpg?v=1780795311"},{"product_id":"wildcat-heavy-duty-billet-tie-rods-arctic-cat-textron","title":"Heavy Duty Billet Tie Rods - Arctic Cat Wildcat","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Billet Tie Rods - Arctic Cat Textron Wildcat\u003cstrong\u003e 2 \u0026amp; 4 Seat\u003c\/strong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e50 Caliber Racing Tie Rods are machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated chromoly heim joints. The rods are 1.25\" diameter for extreme duty and they are as stout as it gets. The weak OEM tie rods are prone to failure under tough trail conditions, however our Tie Rods are significantly stronger and are designed for racing, extreme jumping, high speed whoops and all other abusive driving styles that you can dish out. If you want a bulletproof setup on your Wildcat, you'll need our heavy duty tie rods! Available with black powdercoat finish or raw (no finish).\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e- (2) Billet Tie Rods (left and right)\u003cbr\u003e- (4) Chromoly Heim Joints with jam nuts\u003cbr\u003e- (8) High Misalignment Spacers\u003cbr\u003e- (2) Nyloc Nuts\u003cbr\u003e- (2) Shoulder Bolts\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- 1.25\" Diameter Solid Billet Aluminum\u003cbr\u003e\u003cspan\u003e- 5\/8\" 4130 Chromoly Heim Joints\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e- 50 Caliber Racing Logo CNC engraved on one rod\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e\u003cspan\u003e- Available with black powdercoat or raw (no finish)\u003c\/span\u003e\u003cbr\u003e- Designed for extreme duty\u003c\/span\u003e\u003cbr\u003e- 1 Year Warranty (normal wear and tear to heims is not covered under warranty)\u003cbr\u003e- Simple installation\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFits the following 2 \u0026amp; 4 seat models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eARCTIC CAT \/ TEXTRON\u003cbr\u003e\u003cbr\u003eWildcat 1000 (2012-2019) * DOES NOT fit Trail, Sport, or XX models\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236912046337,"sku":"TRW1000","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":49236912079105,"sku":"TRW1000B","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7654.jpg?v=1780795351"},{"product_id":"heavy-duty-billet-tie-rods-rzr-s900-s1000","title":"Heavy Duty Billet Tie Rods - RZR S 900 \/ 1000","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Billet Tie Rod Kit for \u003cstrong\u003ePolaris RZR S 900, S 1000\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMachined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated chromoly Heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your Polaris RZR, you need our heavy duty tie rods!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e- (2) 1.125 Billet Tie rods (Left and Right)\u003cbr\u003e- (4) 5\/8\" Heat Treated 4130 Chromoly Heim joints\u003cbr\u003e- (2) Stainless steel clevis yoke ends\u003cbr\u003e- (4) High Misalignment Spacers\u003cbr\u003e- (2) Shoulder Bolts with lock nuts\u003cbr\u003e- Available in black powdercoat or raw (no finish)\u003cbr\u003e- 50 Caliber Racing logo CNC Engraved on one rod\u003cbr\u003e- 1 Year Warranty (excludes normal wear and tear to Heim joints)\u003cbr\u003e- Simple bolt on installation with no modifications needed\u003cbr\u003e- Includes a free can cooler! \u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2 \u0026amp; 4 Seat Polaris models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- RZR S 900 (2015-2026)\u003cbr\u003e- RZR S 1000 (2016-2026)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots.\u003cbr\u003e\u003cbr\u003e\u003cem\u003eWhy do I need these rods? \u003c\/em\u003e\u003cbr\u003e\u003cspan\u003ePolaris factory tie rods are the weakest link in the front suspension. If you are an aggressive driver, they tend to bend or break which can cause an accident and\/or extensive damage to your RZR. Spend a little now, save a lot later.\u003c\/span\u003e\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236912308481,"sku":"TRG1000-S900","price":219.0,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":49236912341249,"sku":"5318A5-S900","price":234.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/5345.jpg?v=1780795406"},{"product_id":"can-am-x3-heavy-duty-tie-rods","title":"Heavy Duty Billet Tie Rods - Can-Am Maverick X3","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Can-Am X3 Heavy Duty Tie Rod Kit (fits 2 \u0026amp; 4 seat models)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e Machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated, Teflon lined Chromoly Heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your X3, you need our heavy duty tie rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e - (2) 1.125 Billet Tie rods (Left and Right)\u003cbr\u003e - (2) 5\/8\" Heat Treated 4130 Chromoly Heim joints with Teflon liner\u003cbr\u003e - (2) Jam nuts\u003cbr\u003e - (4) High Misalignment Spacers\u003cbr\u003e - 50 Caliber Racing logo CNC Engraved on one rod\u003cbr\u003e - Available with black powdercoat or raw (no finish)\u003cbr\u003e - 1 Year Warranty (excludes normal wear and tear to Heim joints)\u003cbr\u003e - Simple bolt on installation with no modifications needed\u003cbr\u003e - Includes a free can cooler! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2016-Up Can-Am Maverick X3 models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Make sure you verify which model and width you have before ordering! \u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e 64\" Wide Models:\u003c\/strong\u003e\u003cbr\u003e - X3 900 HO \u003cbr\u003e - X3 Turbo\u003cbr\u003e - X3 Turbo R\u003cbr\u003e - X3 X DS Turbo R\u003cbr\u003e - X3 X RC Turbo\u003cbr\u003e - X3 X MR Turbo\u003cbr\u003e - X3 MAX Turbo\u003cbr\u003e - X3 MAX Turbo R \u003cbr\u003e - X3 MAX X DS Turbo R\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e72\" Wide Models:\u003c\/strong\u003e\u003cbr\u003e - X3 MAX X RS Turbo R\u003cbr\u003e - X3 X RS Turbo R\u003cbr\u003e - X3 X RC Turbo R\u003cbr\u003e - X3 X MR Turbo R\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTES:\u003cbr\u003e \u003c\/strong\u003e- There are 2 different widths, and they are not interchangeable! If you do not know which model you have, you can measure the track width. It should be either 64\" or 72\" on stock wheel backspacing.\u003cbr\u003e - 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots.\u003cbr\u003e\u003cbr\u003e \u003cbr\u003e\u003cbr\u003e\u003cem\u003eWhy do I need these rods? \u003c\/em\u003e\u003cbr\u003e Can-am factory tie rods are the weakest link in the front suspension. If you are an aggressive driver, they tend to bend or break which can cause an accident and\/or extensive damage to your X3. Spend a little now, save a lot later.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver \/ 64\" Wide","offer_id":49236912374017,"sku":"5318A6","price":230.0,"currency_code":"USD","in_stock":true},{"title":"Raw Silver \/ 72\" Wide","offer_id":49236912439553,"sku":"5318A7","price":230.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 64\" Wide","offer_id":49236912406785,"sku":"5318A8","price":245.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ 72\" Wide","offer_id":49236912472321,"sku":"5318A9","price":245.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/5464.jpg?v=1780795452"},{"product_id":"rzr-turbo-s-heavy-duty-tie-rods","title":"Heavy Duty Billet Tie Rods - Polaris RZR Turbo S","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty CNC Billet Tie Rod Kit for RZR Turbo S (2018-2022)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMachined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated Chromoly Heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your Polaris RZR, you need our heavy duty tie rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e- (2) 1.125 Billet Tie rods (21 3\/8\" Long)\u003cbr\u003e- (4) 5\/8\" Heat Treated 4130 Chromoly Heim joints (2 left, 2 right hand thread)\u003cbr\u003e- (2) Stainless steel clevis yoke ends with 16mm bolts (inner tie rod ends)\u003cbr\u003e- (4) High Misalignment Spacers with bolts and lock nuts (12mm)\u003cbr\u003e- (2) Shoulder Bolts (15mm)\u003cbr\u003e- Available with black powdercoat or raw (no finish)\u003cbr\u003e- 50 Caliber Racing logo engraved on one rod\u003cbr\u003e- 1 Year Warranty (excludes normal wear and tear to Heim joints)\u003cbr\u003e- Simple bolt on installation with no modifications needed\u003cbr\u003e- Includes a free can cooler! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2 \u0026amp; 4 Seat Polaris RZR models:\u003c\/strong\u003e\u003cbr\u003e- RZR TURBO S (2018-2022) * fits 72\" Wide models only\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots. \u003cbr\u003e\u003cbr\u003e\u003cem\u003eWhy do I need these rods? \u003c\/em\u003e\u003cbr\u003ePolaris factory tie rods are the weakest link in the front suspension. If you are an aggressive driver, they tend to bend or break which can cause an accident and\/or extensive damage to your RZR. Spend a little now, save a lot later.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236912505089,"sku":"5318A10","price":249.0,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":49236912537857,"sku":"5318A11","price":264.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6375.jpg?v=1780795486"},{"product_id":"rzr-xp-turbo-billet-tie-rods","title":"Heavy Duty Billet Tie Rods - Polaris RZR XP Turbo","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Billet Tie Rod Kit for RZR XP Turbo\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMachined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated chromoly heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your Polaris RZR, you need our heavy duty tie rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRZR XP Turbo Billet Tie Rods Kit includes:\u003c\/strong\u003e\u003cbr\u003e- (2) 1.125 Billet Tie rods (Left and Right)\u003cbr\u003e- (4) 5\/8\" Heat Treated 4130 Chromoly heim joints\u003cbr\u003e- (2) Stainless steel clevis yoke ends\u003cbr\u003e- (4) High Misalignment Spacers\u003cbr\u003e- (2) Shoulder Bolts with lock nuts\u003cbr\u003e- Available with black powdercoat or raw (no finish)\u003cbr\u003e- 50 Caliber Racing logo CNC Engraved on one rod\u003cbr\u003e- 1 Year Warranty (excludes normal wear and tear to heim joints)\u003cbr\u003e- Simple bolt on installation with no modifications needed\u003cbr\u003e- Includes a free can cooler! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2 \u0026amp; 4 Seat Polaris RZR models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit # TR1000B:\u003c\/strong\u003e\u003cbr\u003e- XP Turbo (2016) *see note below\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit # TR100017:\u003c\/strong\u003e\u003cbr\u003e- XP Turbo (2017-2021) * see note below\u003cbr\u003e\u003cbr\u003eNotes:\u003cbr\u003e- Polaris changed from 10mm to 12mm bolts midway through 2017. If your bolts are 12mm, you will need to order kit # TR100017. \u003cbr\u003e- \u003cstrong\u003eThere is a difference between years,\u003c\/strong\u003e so make sure you specify year and model before ordering!\u003cbr\u003e- 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots.\u003cbr\u003e\u003cbr\u003e\u003cem\u003eWhy do I need these rods? \u003c\/em\u003e\u003cbr\u003ePolaris factory tie rods are the weakest link in the front suspension. If you are an aggressive driver, they tend to bend or break which can cause an accident and\/or extensive damage to your RZR. Spend a little now, save a lot later.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Black \/ 2015-2017","offer_id":49236912603393,"sku":"5318A2-XPT","price":234.0,"currency_code":"USD","in_stock":false},{"title":"Raw Silver \/ 2015-2017","offer_id":49236912636161,"sku":"TR1000B-XPT","price":219.0,"currency_code":"USD","in_stock":false},{"title":"Raw Silver \/ 2017 - up","offer_id":49236912668929,"sku":"TR100017-XPT","price":239.0,"currency_code":"USD","in_stock":false},{"title":"Black \/ 2017 - up","offer_id":49236912701697,"sku":"5318A3-XPT","price":254.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7665.jpg?v=1780795526"},{"product_id":"billet-tie-rods-for-polaris-rs1","title":"Heavy Duty Billet Tie Rods - Polaris RZR RS1","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Billet Tie Rod Kit for RZR RS1\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eMachined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated chromoly heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your Polaris RZR, you need our heavy duty tie rods!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e- (2) 1.125 Billet Tie rods (Left and Right)\u003cbr\u003e- (4) 5\/8\" Heat Treated 4130 Chromoly heim joints\u003cbr\u003e- (2) Stainless steel clevis yoke ends\u003cbr\u003e- (4) High Misalignment Spacers\u003cbr\u003e- (2) Shoulder Bolts with lock nuts\u003cbr\u003e- Available with black powdercoat or raw (no finish)\u003cbr\u003e- 50 Caliber Racing logo, CNC Engraved\u003cbr\u003e- 1 Year Warranty (excludes normal wear and tear to heim joints)\u003cbr\u003e- Simple bolt on installation with no modifications needed\u003cbr\u003e- Includes a free can cooler! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following Polaris RZR models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- RS1 (2018-2019)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: 50 Caliber Racing Heavy Duty Tie Rods make use of the existing factory boots. \u003cbr\u003e\u003cbr\u003e\u003cem\u003eWhy do I need these rods? \u003c\/em\u003e\u003cbr\u003ePolaris factory tie rods are the weakest link in the front suspension. If you are an aggressive driver, they tend to bend or break which can cause an accident and\/or extensive damage to your RZR. Spend a little now, save a lot later.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236912767233,"sku":"TR1000B-RS1","price":219.0,"currency_code":"USD","in_stock":false},{"title":"Black","offer_id":49236912800001,"sku":"5318A2-RS1","price":234.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7679.jpg?v=1780795572"},{"product_id":"heavy-duty-billet-tie-rods-polaris-general","title":"Heavy Duty Billet Tie Rods - Polaris General","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Billet Tie Rod Kit for \u003cstrong\u003ePolaris General (fits 2 \u0026amp; 4 seat models)\u003c\/strong\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eMachined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 5\/8 inch heat treated chromoly Heim joints. Each rod is 1.125\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these rods racing BITD and WORCS Racing and have had great results. They are designed for racing, extreme jumping, high speed whoops, dunes, rock crawling and all other abusive driving situations. If you want a bulletproof setup on your Polaris UTV, you need our heavy duty tie rods!\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e- (2) 1.125 Billet Tie rods (Left and Right)\u003cbr\u003e- (4) 5\/8\" Heat Treated 4130 Chromoly Heim joints\u003cbr\u003e- (2) Stainless steel clevis yoke ends\u003cbr\u003e- (4) High Misalignment Spacers\u003cbr\u003e- (2) Shoulder Bolts with lock nuts\u003cbr\u003e- Available in black powdercoat or raw (no finish)\u003cbr\u003e- 50 Caliber Racing logo CNC Engraved on one rod\u003cbr\u003e- 1 Year Warranty (excludes normal wear and tear to Heim joints)\u003cbr\u003e- Simple bolt on installation with no modifications needed\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2 \u0026amp; 4 Seat Polaris models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- General (2016-2025) * does not fit XP models\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNOTE\u003c\/strong\u003e: 50 Caliber Racing Heavy Duty Tie Rods require the re-use of the existing factory boots.\u003cbr\u003e\u003cbr\u003e\u003cem\u003eWhy do I need these rods? \u003c\/em\u003e\u003cbr\u003e\u003cspan\u003ePolaris factory tie rods are the weakest link in the front suspension. If you are an aggressive driver, they tend to bend or break which can cause an accident and\/or extensive damage to your RZR. Spend a little now, save a lot later.\u003c\/span\u003e\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"No finish (raw) \/ 2016-2018","offer_id":49236912865537,"sku":"TRG1000","price":219.0,"currency_code":"USD","in_stock":false},{"title":"No finish (raw) \/ 2019-2026","offer_id":49236912898305,"sku":"TRG1001","price":219.0,"currency_code":"USD","in_stock":false},{"title":"Black Powdercoat \/ 2016-2018","offer_id":49236912931073,"sku":"5318A5","price":234.0,"currency_code":"USD","in_stock":false},{"title":"Black Powdercoat \/ 2019-2026","offer_id":49236912963841,"sku":"5318A12","price":234.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/12151.jpg?v=1780795619"},{"product_id":"billet-sway-bar-end-links-rzr-xp1000-xp-turbo","title":"Billet Sway Bar End Links RZR XP1000  XP Turbo","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing CNC Billet Heavy Duty Sway Bar Link Kit RZR XP1000, XP Turbo\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCustom sway bar end links are machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 4130 Chromoly 5\/8 inch Heim joints with nylon \/ Teflon liner. The rods are 1.25\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these end links. We race BITD and WORCS Racing circuits. We have not had a single failure. They are designed for racing, extreme jumping, high speed whoops and all other extreme driving conditions you can dish out. If you want a bulletproof set up in the rear of your Polaris RZR, you need these end links!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRear Sway Bar Kit Includes:\u003c\/strong\u003e\u003cbr\u003e- (2) billet sway bar end link rods\u003cbr\u003e- (4) Heim Joints with jam nuts\u003cbr\u003e- (8) High Misalignment Spacers\u003cbr\u003e- (2) Upper Bolts, nuts and washers \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- 1.25\" diameter rods\u003cbr\u003e- CNC Machined in the USA from 6061 billet aluminum\u003cbr\u003e- 5\/8\" Heim joints (4130 Chromoly with nylon \/ Teflon liner)\u003cbr\u003e- Stronger, stiffer and lighter than stock\u003cbr\u003e- Available with black powdercoat or raw aluminum\u003cbr\u003e- Lifetime warranty on rods themselves (normal wear and tear on heims is not covered)\u003cbr\u003e- Simple 10 minute install with no modifications needed\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWill fit the following Polaris models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e- RZR XP 1000 (2014-2022)\u003cbr\u003e- RZR XP4 1000 4 Seater (2014-2022)\u003cbr\u003e- RZR XP Turbo (2015-2021)\u003cbr\u003e- RZR XP4 Turbo 4 Seater (2015-2021)\u003cbr\u003e- RZR Turbo (2018-2021)\u003cbr\u003e- RZR Turbo S 4 Seater (2018-2021)\u003cbr\u003e*2017+ RZR XP1000 models will fit FRONT and REAR\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eWhy do I need these links?\u003c\/em\u003e\u003c\/strong\u003e (besides they look awesome!)\u003cbr\u003e\u003cbr\u003e50 Caliber Racing's Heavy Duty sway bar link kit was designed to address one of the biggest flaws in the Polaris rear suspension design. Polaris stock sway bar end links are extremely weak and will break due to aggressive driving.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236913094913,"sku":"EL1000C","price":139.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":49236913127681,"sku":"EL1000CB","price":144.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/999.jpg?v=1780795663"},{"product_id":"billet-sway-bar-end-links-for-can-am-x3","title":"Billet Sway Bar End Links for Can-Am X3","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Rear Sway Bar End Link Kit Can-Am X3 (fits both 2 and 4 seat models)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCustom sway bar end links are machined in the USA from solid 6061 CNC billet aluminum and fitted with 4130 Chromoly 5\/8\" heim joints with nylon \/ Teflon liner. The billet rods are sized at 1.25\" diameter, and they are as stout as it gets. They are designed for racing, extreme jumping, high speed whoops and all other extreme driving conditions you can dish out. We run these exclusively on our factory sponsored BITD and WORCS cars and have never had a single failure. If you want a bulletproof set up for your X3, you need these end links!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRear Sway Bar Kit Includes:\u003c\/strong\u003e\u003cbr\u003e- (2) billet sway bar end link rods\u003cbr\u003e- (4) Heim Joints with jam nuts\u003cbr\u003e- (8) High Misalignment Spacers\u003cbr\u003e- (2) Upper Bolts, nuts and washers \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- Rear axle end link kit\u003cbr\u003e- 1.25\" diameter rods\u003cbr\u003e- CNC Machined in the USA from 6061 billet aluminum\u003cbr\u003e- 5\/8\" Heim joints (4130 Chromoly with nylon \/ teflon liner)\u003cbr\u003e- Stronger, stiffer and lighter than stock\u003cbr\u003e- Available with black powdercoat or raw aluminum\u003cbr\u003e- Lifetime warranty on rods themselves (normal wear and tear on heims is not covered)\u003cbr\u003e- Simple 10 minute install with no modifications needed\u003cbr\u003e- Free can cooler with every order!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWill fit the following:\u003c\/strong\u003e\u003cbr\u003e- Can-Am X3 (2017-2022) - REAR AXLE\u003cbr\u003e\u003cbr\u003e 64\" Wide Models:\u003cbr\u003e - X3 900 HO \u003cbr\u003e - X3 Turbo\u003cbr\u003e - X3 Turbo R\u003cbr\u003e - X3 X DS Turbo R\u003cbr\u003e - X3 X RC Turbo\u003cbr\u003e - X3 X MR Turbo\u003cbr\u003e - X3 Max Turbo\u003cbr\u003e - X3 Max Turbo R \u003cbr\u003e - X3 Max X DS Turbo R\u003cbr\u003e\u003cbr\u003e 72\" Wide Models:\u003cbr\u003e - X3 Max X RS Turbo R\u003cbr\u003e - X3 X RS Turbo R\u003cbr\u003e - X3 X RC Turbo R\u003cbr\u003e - X3 X MR Turbo R\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Raw Silver","offer_id":49236913488129,"sku":"ELX3C","price":144.0,"currency_code":"USD","in_stock":true},{"title":"Black","offer_id":49236913520897,"sku":"ELX3CB","price":149.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/4855.jpg?v=1780795709"},{"product_id":"sway-bar-end-links-polaris-rzr-pro-xp","title":"Sway Bar End Links Polaris RZR PRO XP","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing CNC Billet Heavy Duty Rear Sway Bar Links for Polaris RZR XP PRO 2 \u0026amp; 4 Seater\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eCustom sway bar end links are machined right here in the USA from solid 6061 CNC Billet aluminum and fitted with 4130 Chromoly 5\/8 inch heim joints with nylon \/ Teflon liner. The rods are 1.25\" diameter for extreme duty and they are as stout as it gets. We have done extensive testing on these end links. We race BITD and WORCS Racing circuits. We have not had a single failure. They are designed for racing, extreme jumping, high speed whoops and all other extreme driving conditions you can dish out. If you want a bulletproof set up in the rear of your RZR, you need these end links!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eRear Sway Bar Kit Includes:\u003c\/strong\u003e\u003cbr\u003e- (2) billet sway bar end link rods\u003cbr\u003e- (4) Heim Joints with jam nuts\u003cbr\u003e- (8) High Misalignment Spacers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- 1.25\" diameter rods\u003cbr\u003e- CNC Machined in the USA from 6061 billet aluminum\u003cbr\u003e- 5\/8\" Heim joints (4130 Chromoly with nylon \/ teflon liner)\u003cbr\u003e- Stronger, stiffer and lighter than stock\u003cbr\u003e- Available with black powdercoat or raw aluminum\u003cbr\u003e- Lifetime warranty on rods themselves (normal wear and tear on heims is not covered)\u003cbr\u003e- Simple 10 minute install with no modifications needed\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWill fit the following Polaris 2 \u0026amp; 4 Seat models:\u003c\/strong\u003e\u003cbr\u003e- RZR PRO XP (2020-up)\u003cbr\u003e- RZR PRO XP 4 (2020-up)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eWhy do I need these links?\u003c\/em\u003e\u003c\/strong\u003e (besides they look awesome!)\u003cbr\u003e\u003cbr\u003e 50 Caliber Racing's Heavy Duty sway bar link kit was designed to address one of the biggest flaws in the Polaris rear suspension design. Polaris stock sway bar end links are extremely weak and can easily break due to aggressive driving.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Black","offer_id":49236913553665,"sku":"5319A2","price":149.0,"currency_code":"USD","in_stock":true},{"title":"Raw Silver","offer_id":49236913586433,"sku":"5319A1","price":139.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/8327.jpg?v=1780795746"},{"product_id":"polaris-pro-r-sway-bar-end-links","title":"Polaris Pro R Sway Bar End Links","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing CNC Billet Heavy Duty Sway Bar Links for Polaris RZR PRO R 2 \u0026amp; 4 Seater\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur custom sway bar end links are CNC machined in the USA from solid 6061 billet aluminum and fitted with 4130 Chromoly PTFE heim joints. The rods are built for extreme duty, at 1.25\" diameter, and are as stout as it gets. We have extensively tested these end links on BITD and WORCS Racing circuits, and they have not failed once. They are designed for racing, extreme jumping, high speed whoops and all other extreme driving conditions you can dish out. If you want stiff, precise handling on your RZR, you need these end links! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eEach Sway Bar Kit Includes:\u003c\/strong\u003e\u003cbr\u003e- (2) Billet sway bar end link rods (choose front or rear before ordering)\u003cbr\u003e- (4) 5\/8 RH Heim Joints with jam nuts\u003cbr\u003e- (8) High Misalignment Spacers\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- 1.25\" diameter rods\u003cbr\u003e- CNC Machined in the USA from 6061 billet aluminum\u003cbr\u003e- 5\/8\" Heim joints (4130 Chromoly with PTFE liner)\u003cbr\u003e- Stronger, stiffer and lighter than stock\u003cbr\u003e- Available with black powdercoat or raw aluminum\u003cbr\u003e- Lifetime warranty on rods themselves (normal wear and tear on heims is not covered)\u003cbr\u003e- Simple 10 minute install with no modifications needed\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eWill fit the following Polaris 2 \u0026amp; 4 Seat models:\u003c\/strong\u003e\u003cbr\u003e- RZR PRO R (2022-up)\u003cbr\u003e- RZR PRO R 4 (2022-up)\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cem\u003eWhy do I need these links?\u003c\/em\u003e\u003c\/strong\u003e (besides they look awesome!)\u003cbr\u003e\u003cbr\u003e 50 Caliber Racing's Heavy Duty sway bar link kit was designed to address one of the biggest flaws in the Polaris rear suspension design. Polaris stock suspension links are extremely weak and tend to bend or break under the stresses of aggressive driving.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Black \/ Front","offer_id":49236913651969,"sku":"5319A6","price":179.0,"currency_code":"USD","in_stock":true},{"title":"Black \/ Rear","offer_id":49236913717505,"sku":"5319A4","price":199.0,"currency_code":"USD","in_stock":true},{"title":"Raw Silver \/ Front","offer_id":49236913684737,"sku":"5319A5","price":169.0,"currency_code":"USD","in_stock":true},{"title":"Raw Silver \/ Rear","offer_id":49236913750273,"sku":"5319A3","price":189.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/9570.jpg?v=1780795782"},{"product_id":"heavy-duty-adjustable-ball-joint-polaris-rzr-xp1000-turbo-rs1","title":"Heavy Duty Adjustable Ball Joint Polaris RZR XP1000 Turbo RS1","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Adjustable Greaseable Ball Joint for Polaris RZR XP1000 XP Turbo 2014+\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eReplace your worn factory part with this adjustable ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup and low profile grease zerk. Adjustable end cap allows for slop to be removed as the ball joint wears. Fits upper \u0026amp; lower a-arms on both sides. \u003c\/span\u003e\u003cspan\u003e6 month warranty covers any breakage no matter how you broke it!\u003c\/span\u003e\u003cspan\u003e \u003c\/span\u003e\u003cspan\u003eReplaces Polaris part #(s) 7082487, 7082422, 7082275, 7081992, 7081867.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e - Includes one heavy duty ball joint with snap ring\u003cbr\u003e - Fits front upper \u0026amp; lower A-arms, right or left\u003cbr\u003e - Adjustable end cap - allows slop to be removed as joint wears\u003cbr\u003e - Greasable, equipped with low profile needle style zerk\u003cbr\u003e - Heavy duty steel housing\u003cbr\u003e - POM-M90 bearing cup\u003cbr\u003e - Replaces OEM part #(s): 7082487, 7082422, 7082275, 7081992, 7081867\u003cbr\u003e - 4 required per vehicle\u003cbr\u003e - 6 month warranty covers any breakage no matter how you broke it!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2 and 4 seat Polaris models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e - XP 1000 (2014-2024)\u003cbr\u003e-  XP Turbo (2016-2023)\u003cbr\u003e- Turbo S (2018-2021)\u003cbr\u003e- Pro XP (2020-2024)\u003cbr\u003e- PRO R (2022+)\u003cbr\u003e- Turbo R (2022+)\u003cbr\u003e- RS1 (2018-2023)\u003cbr\u003e- Ranger 1000, XP 1000 (2021-2024)\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236925710593,"sku":"6102A2","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/8219.jpg?v=1780798193"},{"product_id":"high-capacity-ball-joint-polaris-rzr-xp1000-turbo-rs1","title":"High Capacity Ball Joint Polaris RZR XP1000 Turbo RS1","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing High Capacity Sealed Ball Joint for Polaris RZR XP1000 XP Turbo 2014+\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e Replace your worn factory part with a high capacity sealed ball joint from 50 Caliber Racing. Heavy duty steel housing with a POM-M90 bearing cup for extra long life. Fits front upper \u0026amp; lower a-arms on both sides. Ready to install and get your machine back on the trail. 6 month warranty covers any breakage no matter what you did to break it! Replaces OEM Polaris part number(s) 7082487, 7082422, 7082275, 7081992, 7081867. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e - Includes one heavy duty ball joint with snap ring\u003cbr\u003e - Fits front upper \u0026amp; lower A-arms, right or left\u003cbr\u003e - Replaces OEM part #(s): 7082487, 7082422, 7082275, 7081992, 7081867\u003cbr\u003e - Heavy duty steel housing\u003cbr\u003e - POM-M90 bearing cup\u003cbr\u003e - 4 required per vehicle\u003cbr\u003e- 6 month warranty covers any breakage no matter how you broke it!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following 2 and 4 seat Polaris models:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e - XP 1000 (2014-2023)\u003cbr\u003e - XP4 1000 (2014-2023)\u003cbr\u003e - XP Turbo (2016-2023)\u003cbr\u003e - XP 4 Turbo (2017-2023)\u003cbr\u003e - Turbo S (2018-2023)\u003cbr\u003e - Turbo S 4 (2018-2023)\u003cbr\u003e - Pro XP (2020-2023)\u003cbr\u003e - PRO XP 4 (2020-2023)\u003cbr\u003e - RS1 (2018-2023)\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236925841665,"sku":"6102A1","price":39.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/8227.jpg?v=1780798228"},{"product_id":"oem-polaris-steering-rack-1824469-rzr-xp1000-xp-turbo","title":"OEM Polaris Steering Rack 1824469 - RZR XP1000  \u0026 XP Turbo","description":"\u003cp\u003e\u003cstrong\u003ePolaris OEM Factory Replacement Steering Rack, Part #1824469 for RZR XP1000 2015-2018, XP Turbo 2016\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eGenuine OEM Polaris steering rack. Complete rack with tie rods and inner and outer tie rod ends, installed. There are many offshore aftermarket replacements available at a better price, but none of them can match the quality of Polaris OEM parts. We recommend stock parts for longevity and reliability. \u003cbr\u003e\u003cbr\u003eREPLACES OEM Part numbers - 1824469, 1824205\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e - Steering rack assembly\u003cbr\u003e - OEM Part number - 1824469\u003cbr\u003e - Genuine Polaris factory replacement part\u003cbr\u003e - Manufacturer Warranty\u003cbr\u003e - Better quality than aftermarket\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following Polaris RZR models\u003c\/strong\u003e\u003cbr\u003e - XP 1000 2 Seater (2015 - 2018)\u003cbr\u003e - XP 4 1000 4 Seater (2015- 2018)\u003cbr\u003e- XP Turbo (2016 only)\u003cbr\u003e\u003cbr\u003e Polaris oem parts are very year specific. If you have any questions, please send us a message with your existing part number before ordering.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Polaris","offers":[{"title":"Default Title","offer_id":49236955398401,"sku":"Polaris-Rack-1824469","price":650.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7721.jpg?v=1780801936"},{"product_id":"tie-rod-end-kit-polaris-sportsman-ranger","title":"Tie Rod End Kit Polaris Sportsman, Ranger","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Tie Rod End Kit for Polaris Sportsman Ranger Magnum, Scrambler UTV \u0026amp; ATVs\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eHigh quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. OEM style and fit for trouble free installation. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* Replaces Polaris part numbers 7061138 and 7061139\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e- 1 Inner Tie Rod End\u003cbr\u003e- 1 Outer Tie Rod End\u003cbr\u003e- 1 Bolt\u003cbr\u003e- 2 Washers\u003cbr\u003e- 1 Nyloc nut\u003cbr\u003e- 1 Cotter Pin\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following Polaris Models:\u003c\/strong\u003e\u003cbr\u003e- ATP 330, 550 (2004-2005)\u003cbr\u003e- Breeze (2010-2011)\u003cbr\u003e- Brutus (2013-2015)\u003cbr\u003e- Diesel (2000-2001)\u003cbr\u003e- GEM All Options (2013-2015)\u003cbr\u003e- Big Boss (2000-2002)\u003cbr\u003e- Magnum 325 330, 500 (2000-2006)\u003cbr\u003e- Ranger 400, 500, 700, 800, 900, EV (2007-2016)\u003cbr\u003e- RZR 570, 800, S 800, 4 800, XP900, XP4 900 (2008-2014)\u003cbr\u003e- Scrambler 400 500 (2000-2006)\u003cbr\u003e- Scrambler 500 (2000-2006)\u003cbr\u003e- Sportsman 335 400, 500, 600, 700, 800 (2000-2006)\u003cbr\u003e- Sportsman Ace 325, 570 (2014-2019)\u003cbr\u003e- Trail Blazer (2000-2006)\u003cbr\u003e- Trail Boss 330 (2000-2006)\u003cbr\u003e- Worker 500 (2001)\u003cbr\u003e- Xpedition 325, 425 (2000-2002)\u003cbr\u003e- Xplorer 400 (2000-2002)\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236967391489,"sku":"2017A3","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6618.jpg?v=1780803167"},{"product_id":"tie-rod-end-kit-suzuki-lt250","title":"Tie Rod End Kit Suzuki LT250","description":"\n\u003cp\u003e\u003cstrong\u003eTie Rod End Kit for Suzuki LT250 ATV\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eHigh quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e- 1 Inner Tie Rod End\u003cbr\u003e- 1 Outer Tie Rod End\u003cbr\u003e- 2 Washers\u003cbr\u003e- 2 Nyloc nuts\u003cbr\u003e- 2 Cotter Pins\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following Suzuki ATVs:\u003c\/strong\u003e\u003cbr\u003e- LT-125 (1985-87)\u003cbr\u003e- LT-185 (1984-87)\u003cbr\u003e- LT-230E (1987-93)\u003cbr\u003e- LT-230GE (1985-86)\u003cbr\u003e- LT-230S (1985-88)\u003cbr\u003e- LT-250EF (1985-86)\u003cbr\u003e- LT-250R (1985-92)\u003cbr\u003e- LT-250S (1989-90)\u003cbr\u003e- LT-300E (1987-89)\u003cbr\u003e- LT-80 (1987-06)\u003cbr\u003e- LT-A400 Eiger 2wd and 4wd (2002-04)\u003cbr\u003e- LT-F230 (1986-87)\u003cbr\u003e- LT-F250 Ozark (1988-02)\u003cbr\u003e- LT-F400 Eiger 2wd (2002-04)\u003cbr\u003e- LT-F400F Eiger 4wd (2002-04)\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236967424257,"sku":"2017A2","price":21.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6617.jpg?v=1780803187"},{"product_id":"kawasaki-brute-force-tie-rod-end","title":"Kawasaki Brute Force Tie Rod End","description":"\u003cp\u003e\u003cstrong\u003eTie Rod End Kit for Kawasaki KFV 750 Brute Force ATV (2005-2013)\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e - 1 Inner Tie Rod End\u003cbr\u003e - 1 Outer Tie Rod End\u003cbr\u003e - 2 Lock Nuts\u003cbr\u003e - 2 Castle Nuts\u003cbr\u003e - 2 Cotter Pins\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003cbr\u003e Kawasaki KFV750 Brute Force (2005-2013)\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236967522561,"sku":"2017A1","price":25.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6616.jpg?v=1780803203"},{"product_id":"tie-rod-end-kit-honda-fl250-odyssey","title":"Tie Rod End Honda FL250 Odyssey","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Tie Rod End Kit for Honda FL250 Odyssey ATV\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e High quality aftermarket tie rod ends from 50 Caliber Racing. This kit will service one side. Includes 1 inner and 1 outer end for the tie rod on your Honda. Comes complete with nuts cotter pins.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKit includes:\u003c\/strong\u003e\u003cbr\u003e - 1 Inner End\u003cbr\u003e - 1 Outer End\u003cbr\u003e - 2 Replacement Nuts\u003cbr\u003e - 2 Cotter Pins\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits:\u003c\/strong\u003e\u003cbr\u003e - Honda FL250 Odyssey (1977-1984)\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236967620865,"sku":"2017","price":25.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6615.jpg?v=1780803224"},{"product_id":"tie-rod-end-kit-yamaha-grizzly-banshee-raptor","title":"Tie Rod End Kit Yamaha Grizzly Banshee Raptor","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Tie Rod End Kit for Yamaha ATVs - Grizzly Raptor Banshee Kodiak\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e - 1 Inner Tie Rod End\u003cbr\u003e - 1 Outer Tie Rod End\u003cbr\u003e - 2 Locking Nuts\u003cbr\u003e - 2 Castle Nuts\u003cbr\u003e - 2 Cotter Pins\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following Yamaha ATVs:\u003c\/strong\u003e\u003cbr\u003e - YFA1 (1991-2004)\u003cbr\u003e - YFB250 Timberwolf (1992-98)\u003cbr\u003e - YFB250FW Timberwolf (1994-2000)\u003cbr\u003e - YFM 250 Raptor (2008-12)\u003cbr\u003e - YFM125 Grizzly (2004-12)\u003cbr\u003e - YFM125 Raptor (2011-12)\u003cbr\u003e - YFM200 Moto-4 (1986-89)\u003cbr\u003e - YFM225 Moto-4 (1986-88)\u003cbr\u003e - YFM250 Moto-4 (1989-91)\u003cbr\u003e - YFM350 Raptor (2004-12)\u003cbr\u003e - YFM350 Warrior (1987-2004)\u003cbr\u003e - YFM350ER Moto-4 (1987-95)\u003cbr\u003e - YFM350FW Big Bear (1987-99)\u003cbr\u003e - YFM350U Big Bear (1996-99)\u003cbr\u003e - YFM35FX Wolverine (1995-2005)\u003cbr\u003e - YFM400 Kodiak 2WD (2000-01)\u003cbr\u003e - YFM400 Kodiak 4WD (1993-2002)\u003cbr\u003e - YFM550 Grizzly (2009-12)\u003cbr\u003e - YFM550 Grizzly EPS (2009-12)\u003cbr\u003e - YFM600 Grizzly (1998-2002)\u003cbr\u003e - YFM660 Grizzly (2002-08)\u003cbr\u003e - YFM700 Grizzly (2007-12)\u003cbr\u003e - YFM700 Grizzly EPS (2008-12)\u003cbr\u003e - YFS200 Blaster (1988-2006)\u003cbr\u003e - YFZ350 Banshee (1987-2006)\u003cbr\u003e - YFZ450 (2004-05)\u003cbr\u003e\u003cbr\u003e Replaces Yamaha Part #s 59V-23841-01-00 and Yamaha 59V-23841-00-00\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236967686401,"sku":"2017A4","price":24.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6619.jpg?v=1780803243"},{"product_id":"tie-rod-end-kit-yamaha-raptor-yfm660-atv","title":"Tie Rod End Kit Yamaha Raptor YFM660 ATV","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Tie Rod End Kit for Yamaha Raptor YFM660 ATVs\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e High quality aftermarket tie rod ends from 50 Caliber Racing. Includes 1 inner and 1 outer ends and hardware. This kit is for one side only. If you need to replace both left and right sides, you must order 2 kits.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e - 1 Inner Tie Rod End\u003cbr\u003e - 1 Outer Tie Rod End\u003cbr\u003e - 2 Locking Nuts\u003cbr\u003e - 2 Castle Nuts\u003cbr\u003e - 2 Cotter Pins\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits the following Yamaha ATVs:\u003c\/strong\u003e\u003cbr\u003e - YFM660R Raptor (2001-05)\u003cbr\u003e\u003cbr\u003e Replaces Yamaha Part #s 59V-23841-01-00 and Yamaha 59V-23841-00-00\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236967719169,"sku":"2017A5","price":24.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6620.jpg?v=1780803262"}],"url":"https:\/\/utvdude.com\/collections\/utv-suspension-steering.oembed?page=2","provider":"UTV Dude","version":"1.0","type":"link"}