{"title":"UTV \u0026 Off-Road Fabrication Components","description":"\u003cdiv class=\"category-top-desc\"\u003e\n\u003cp\u003eChromoly heim joints, rod end kits, tube clamps, uniballs, weld adapters \u0026amp; DZUS tabs for UTV \u0026amp; off-road fab\u003c\/p\u003e\n\u003cp\u003eBuild custom radius rods, tie rods, control arms \u0026amp; suspension links that hold up to real abuse\u003c\/p\u003e\n\u003c\/div\u003e","products":[{"product_id":"58-rod-end-heim-joint-kit-for-125-od-tubing","title":"5\/8 Chromoly Heim Joint Kit – 1.25 OD Tubing","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eSingle joint rod end kit complete with a 5\/8 x 5\/8 heat treated chromoly heim joint, jam nut, and weld in bung (tube adapter). Designed specifically for 1.25\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building custom steering and suspension links for UTVs, ATVs and more. Includes one heim joint, jam nut and bung. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 17,955 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eBore: 5\/8\"\u003c\/li\u003e\n\u003cli\u003eBall end diameter: 1.5\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .562\"\u003c\/li\u003e\n\u003cli\u003eBall width: .75\"\u003c\/li\u003e\n\u003cli\u003eOverall length: 3.37\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.63\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.25\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 1.06\" ID\u003c\/li\u003e\n\u003cli\u003e1.25\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.0\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.500\" ID x .619\" OD x .672\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 1\/2\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.5\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 5\/8-18 x 5\/8 bore Heim - RH or LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eShock mounts\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eDrag links\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003ePanhard bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, sand rail, hot rod, race car, utv and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ Left Hand Thread \/ No","offer_id":49234956124417,"sku":"6101A12","price":23.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Left Hand Thread \/ Yes","offer_id":49234956091649,"sku":"6101B12","price":31.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Right Hand Thread \/ No","offer_id":49234956058881,"sku":"6101A11","price":23.0,"currency_code":"USD","in_stock":false},{"title":".095 Wall \/ Right Hand Thread \/ Yes","offer_id":49234956026113,"sku":"6101B11","price":31.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ Left Hand Thread \/ No","offer_id":49234956255489,"sku":"6100A4","price":23.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Left Hand Thread \/ Yes","offer_id":49234956222721,"sku":"6100B4","price":31.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Right Hand Thread \/ No","offer_id":49234956189953,"sku":"6100A3","price":23.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ Right Hand Thread \/ Yes","offer_id":49234956157185,"sku":"6100B3","price":31.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6328.jpg?v=1780719101"},{"product_id":"58-panhard-bar-rod-end-kit-for-125-od-tubing","title":"5\/8 Chromoly Heim Joint Rod End Kit for 1.25\" Tubing – Panhard Bar","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003ePanhard bar rod end fabrication kit complete with 5\/8 x 5\/8 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.25\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building a custom panhard bar (trackbar), tie rods and radius arms for UTVs, ATVs and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 17,955 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eBore: 5\/8\"\u003c\/li\u003e\n\u003cli\u003eBall end diameter: 1.5\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .562\"\u003c\/li\u003e\n\u003cli\u003eBall width: .75\"\u003c\/li\u003e\n\u003cli\u003eOverall length: 3.37\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.63\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.25\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 1.06\" ID\u003c\/li\u003e\n\u003cli\u003e1.25\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.0\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.500\" ID x .619\" OD x .672\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 1\/2\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.5\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 5\/8-18 x 5\/8 bore Heim - RH Thread\u003c\/li\u003e\n\u003cli\u003e(1) 5\/8-18 x 5\/8 bore Heim - LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) RH Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) LH Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) RH Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(1) LH Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (4) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePanhard bar \/ Trackbar\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, sand rail, hot rod, race car, utv and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ Yes","offer_id":49236188233985,"sku":"6101B13","price":53.0,"currency_code":"USD","in_stock":false},{"title":".095 Wall \/ No","offer_id":49236188266753,"sku":"6101A13","price":48.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ Yes","offer_id":49236188299521,"sku":"6100B5","price":53.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ No","offer_id":49236188332289,"sku":"6100A5","price":48.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6359.jpg?v=1780774531"},{"product_id":"sway-bar-link-fab-kit-58-chromoly-heim-125-od-tubing","title":"5\/8 Chromoly Heim Joint Rod End Kit for 1.25\" Tubing – Sway Bar Link","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eSway bar link rod end fabrication kit complete with 5\/8 x 5\/8 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.25\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building custom sway bar links, tie rods and radius arms for UTVs, ATVs and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 17,955 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eBore: 5\/8\"\u003c\/li\u003e\n\u003cli\u003eBall end diameter: 1.5\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .562\"\u003c\/li\u003e\n\u003cli\u003eBall width: .75\"\u003c\/li\u003e\n\u003cli\u003eOverall length: 3.37\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.63\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.25\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 1.06\" ID\u003c\/li\u003e\n\u003cli\u003e1.25\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.0\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.500\" ID x .619\" OD x .672\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 1\/2\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.5\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 5\/8-18 x 5\/8 bore Heims - RH Thread\u003c\/li\u003e\n\u003cli\u003e(2) 5\/8-18 x 5\/8 bore Heims - LH Thread\u003c\/li\u003e\n\u003cli\u003e(2) RH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) LH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) RH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(2) LH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (8) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie Rods\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003ePanhard bar \/ trackbar\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, sand rail, hot rod, race car, utv and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ Yes","offer_id":49236188397825,"sku":"6101B14","price":103.0,"currency_code":"USD","in_stock":false},{"title":".095 Wall \/ No","offer_id":49236188430593,"sku":"6101A14","price":86.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ Yes","offer_id":49236188463361,"sku":"6100B6","price":103.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ No","offer_id":49236188496129,"sku":"6100A6","price":86.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6378.jpg?v=1780774575"},{"product_id":"4-link-rod-end-kit-58-chromoly-heim-125-od-tubing","title":"5\/8 Chromoly Heim Joint 4 Link Rod End Kit for 1.25\" Tubing","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e4 Link Rod end fabrication kit complete with 5\/8 x 5\/8 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.25\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building a custom 4 link suspension setup, radius rods and control arms for UTVs, ATVs and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 17,955 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eBore: 5\/8\"\u003c\/li\u003e\n\u003cli\u003eBall end diameter: 1.5\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .562\"\u003c\/li\u003e\n\u003cli\u003eBall width: .75\"\u003c\/li\u003e\n\u003cli\u003eOverall length: 3.37\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.63\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.25\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 1.06\" ID\u003c\/li\u003e\n\u003cli\u003e1.25\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.0\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.500\" ID x .619\" OD x .672\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 1\/2\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.5\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(4) 5\/8-18 x 5\/8 bore Heims - RH Thread\u003c\/li\u003e\n\u003cli\u003e(4) 5\/8-18 x 5\/8 bore Heims - LH Thread\u003c\/li\u003e\n\u003cli\u003e(4) RH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(4) LH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(4) RH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(4) LH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (16) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e4 Link suspension arms\u003c\/li\u003e\n\u003cli\u003eTie Rods\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003ePanhard bar \/ trackbar\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003eSway bar end links\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, sand rail, hot rod, race car, utv and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ Yes","offer_id":49236188561665,"sku":"6101B15","price":158.0,"currency_code":"USD","in_stock":false},{"title":".095 Wall \/ No","offer_id":49236188594433,"sku":"6101A15","price":148.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ Yes","offer_id":49236188627201,"sku":"6100B7","price":158.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ No","offer_id":49236188659969,"sku":"6100A7","price":148.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6384.jpg?v=1780774616"},{"product_id":"cnc-end-caps-for-175-tubing-roll-cage-and-bumpers","title":"CNC End Caps for 1.75\" Tubing Roll Cage and Bumpers","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing CNC Billet Aluminum Roll Cage Bumper End Caps\u003cbr\u003e\u003c\/strong\u003e\u003cbr\u003eOpen roll cage tubes don't look very nice, and plain black caps are boring. Keep the water, dirt, and critters out and add some flash to your ride. 50 Caliber Racing CNC billet aluminum caps slip into the end of 1.75\" .095 tubing, giving you a custom, finished look to your roll cage. Milled from 6061 billet aluminum and engraved with the 50 Caliber Racing logo. Made right here in the USA!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- Tubing size: 1.75\" .095 wall thickness\u003cbr\u003e- Will cap any open tubing end on your 1.75\" .095 roll cage or bumper\u003cbr\u003e- Made from 6061 Billet Aluminum\u003cbr\u003e- CNC Machined\u003cbr\u003e- Interference fit with O-ring\u003cbr\u003e- Quick and Easy Install\u003cbr\u003e- Lifetime Warranty!\u003cbr\u003e- Made in USA!\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236754530561,"sku":"6020B1","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/1015.jpg?v=1780788479"},{"product_id":"tubing-end-caps-125-inch-pack-of-10","title":"Tubing End Caps - 1.25 Inch - Pack of 10","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Black Plastic Roll Cage \/ Bumper End Cap Pipe Plugs - Pack of 10\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e Open steel tubes need to be sealed to keep out corrosion, critters, and other nasty things. Our plastic pipe caps slip into the end of 1.25\" OD tubing, giving you a finished look to your cage, bumper, light bar rack, and more. Sold in a pack of 10 plastic caps.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003cbr\u003e- Flexible Black Plastic construction\u003cbr\u003e - Fits 1.25\" OD tubing\u003cbr\u003e - Keeps dirt, water, and bugs out of your tubing\u003cbr\u003e - Sold in a pack of 10 caps\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236782481665,"sku":"5363","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6892.jpg?v=1780789735"},{"product_id":"12-weld-bung-tube-adapter-for-1-14-od-flanged","title":"1\/2\" Weld Bung Tube Adapter For 1 1\/4\" OD - Flanged","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eHeavy duty 1\/2\" weld bung tube adapter with 1\/2-20 right hand threaded center hole. 4130 Chromoly construction, with flanged profile, precision machining and fully threaded center hole for easy, convenient fabricating. Essential for building custom tie rods, control arms, sway bar links and more. Fits 1.25\" round tubing with .095 wall thickness.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eFits 1.25\" .095 wall round tubing\u003c\/li\u003e\n\u003cli\u003eFlanged Profile\u003c\/li\u003e\n\u003cli\u003eThread: Female 1\/2\"-20\u003c\/li\u003e\n\u003cli\u003eThread Direction: Right hand thread\u003c\/li\u003e\n\u003cli\u003eThreaded all the way through\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eDrag links\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003ePanhard bar\u003c\/li\u003e\n\u003cli\u003eBumper Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating parts on your ATV, UTV, Sand Rail, 4x4, Jeep, Hot Rod, Race Car, and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236782809345,"sku":"FAB200A1","price":11.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/3564.jpg?v=1780789764"},{"product_id":"58-weld-bung-tube-end-for-125-od","title":"5\/8\" Weld Bung Tube End For 1.25\" OD","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eHeavy duty 5\/8\" weld bung tube end adapter with 5\/8-18 threaded center hole. 4130 Chromoly construction, with tapered profile, precision machining and fully threaded center hole for easy, convenient fabricating. Essential for building custom tie rods, control arms, sway bar links and more. Fits 1.25\" OD round DOM tubing with .095 or .120 wall thickness.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eTapered Profile\u003c\/li\u003e\n\u003cli\u003eThread: Female 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eFits .095 wall or .120 wall tubing (be sure to choose when ordering)\u003c\/li\u003e\n\u003cli\u003eAvailable in right and left hand thread\u003c\/li\u003e\n\u003cli\u003eThreaded all the way through\u003c\/li\u003e\n\u003cli\u003e4130 Chromoly Steel Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in 2 sizes for different wall thicknesses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e.095 Wall\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFits Tube Size: 1.25\" OD x .095 Wall x 1.06\" ID\u003c\/li\u003e\n\u003cli\u003eThread: Female 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003ePart Numbers: 6100A10 (Right hand thread), 6100B10 (Left hand thread)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e.120 Wall\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFits Tube Size: 1.25\" OD x .120 Wall x 1.01\" ID\u003c\/li\u003e\n\u003cli\u003eThread: Female 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003ePart Numbers: 6100A11 (Right hand thread), 6100B11 (Left hand thread)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eDrag links\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003ePanhard bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating suspension parts on your 4x4, sand rail, hot rod, race car, utv and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ Left Hand Thread","offer_id":49236783857921,"sku":"6100B10","price":15.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Right Hand Thread","offer_id":49236783825153,"sku":"6100A10","price":15.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Left Hand Thread","offer_id":49236783923457,"sku":"6100B11","price":15.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Right Hand Thread","offer_id":49236783890689,"sku":"6100A11","price":15.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/5556.jpg?v=1780789793"},{"product_id":"12-weld-bung-tube-end-for-1-od","title":"1\/2\" Weld Bung Tube End For 1\" OD","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eHeavy duty 1\/2\" weld bung tube end adapter with 1\/2-20 threaded center hole. 4130 Chromoly construction, with tapered profile, precision machining and fully threaded center hole for easy, convenient fabricating. Essential for building custom tie rods, control arms, sway bar links and more. Fits 1\" OD round DOM tubing with .095 or .120 wall thickness.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eTapered Profile\u003c\/li\u003e\n\u003cli\u003eThread: Female 1\/2\"-20\u003c\/li\u003e\n\u003cli\u003eFits .095 wall or .120 wall tubing (be sure to choose when ordering)\u003c\/li\u003e\n\u003cli\u003eAvailable in right and left hand thread\u003c\/li\u003e\n\u003cli\u003eThreaded all the way through\u003c\/li\u003e\n\u003cli\u003e4130 Chromoly Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in 2 sizes for different wall thicknesses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e.095 Wall\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFits Tube Size: 1\" OD x .095 Wall x .810\" ID\u003c\/li\u003e\n\u003cli\u003eThread: Female 1\/2\"-20\u003c\/li\u003e\n\u003cli\u003ePart Numbers: 6100A8 (Right hand thread), 6100B8 (Left hand thread)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e.120 Wall\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFits Tube Size: 1\" OD x .120 Wall x .760\" ID\u003c\/li\u003e\n\u003cli\u003eThread: Female 1\/2\"-20\u003c\/li\u003e\n\u003cli\u003ePart Numbers: 6100A9 (Right hand thread), 6100B9 (Left hand thread)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eDrag links\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003ePanhard bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating suspension parts on your 4x4, sand rail, hot rod, race car, utv and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ Left Hand Thread","offer_id":49236784316673,"sku":"6100B8","price":10.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Right Hand Thread","offer_id":49236784283905,"sku":"6100A8","price":10.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Left Hand Thread","offer_id":49236784382209,"sku":"6100B9","price":10.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Right Hand Thread","offer_id":49236784349441,"sku":"6100A9","price":10.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6259.jpg?v=1780789822"},{"product_id":"34-weld-bung-tube-end-for-1-12-od","title":"3\/4\" Weld Bung Tube End For 1-1\/2\" OD","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eHeavy duty 3\/4\" weld bung tube end adapter with 3\/4-16 threaded center hole. 4130 Chromoly construction, with tapered profile, precision machining and fully threaded center hole for easy, convenient fabricating. Essential for building custom tie rods, control arms, sway bar links and more. Fits 1.5\" OD round DOM tubing with .095 or .120 wall thickness.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eTapered Profile\u003c\/li\u003e\n\u003cli\u003eThread: Female 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eFits .095 wall or .120 wall tubing (be sure to choose when ordering)\u003c\/li\u003e\n\u003cli\u003eAvailable in right and left hand thread\u003c\/li\u003e\n\u003cli\u003eThreaded all the way through\u003c\/li\u003e\n\u003cli\u003e4130 Chromoly Steel Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in 2 sizes for different wall thicknesses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e.095 Wall\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFits Tube Size: 1.5\" OD x .095 Wall x 1.31\" ID\u003c\/li\u003e\n\u003cli\u003eThread: Female 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003ePart Numbers: 6100A12 (Right hand thread), 6100B12 (Left hand thread)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e.120 Wall\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFits Tube Size: 1.5\" OD x .120 Wall x 1.26\" ID\u003c\/li\u003e\n\u003cli\u003eThread: Female 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003ePart Numbers: 6100A13 (Right hand thread), 6100B13 (Left hand thread)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eDrag links\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003ePanhard bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating suspension parts on your rock crawler, 4x4, Jeep, sand rail, hot rod, race car, and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ Left Hand Thread","offer_id":49236784873729,"sku":"6100B12","price":15.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Right Hand Thread","offer_id":49236784972033,"sku":"6100A12","price":15.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Left Hand Thread","offer_id":49236784939265,"sku":"6100B13","price":15.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Right Hand Thread","offer_id":49236784906497,"sku":"6100A13","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6266.jpg?v=1780789850"},{"product_id":"78-weld-bung-tube-end-for-1-12-od-tube","title":"7\/8\" Weld Bung Tube End For 1-1\/2\" OD Tube","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eHeavy duty 7\/8\" weld bung tube end adapter with 7\/8-14 threaded center hole. 4130 Chromoly construction, with tapered profile, precision machining and fully threaded center hole for easy, convenient fabricating. Essential for building custom tie rods, control arms, sway bar links and more. Fits 1.5\" OD round DOM tubing with .120 or .250 wall thickness.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eTapered Profile\u003c\/li\u003e\n\u003cli\u003eThread: Female 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eFits .120 wall or .250 wall tubing (be sure to choose when ordering)\u003c\/li\u003e\n\u003cli\u003eThread Direction: Available in right and left hand thread\u003c\/li\u003e\n\u003cli\u003eThreaded all the way through\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in 2 sizes for different wall thicknesses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e.120 Wall\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFits Tube Size: 1.5\" OD x .120 Wall x 1.26\" ID\u003c\/li\u003e\n\u003cli\u003eThread: Female 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003ePart Numbers: 6100A16 (Right hand thread), 6100B16 (Left hand thread)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e.250 Wall\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFits Tube Size: 1.5\" OD x .250 Wall x 1.0\" ID\u003c\/li\u003e\n\u003cli\u003eThread: Female 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003ePart Numbers: 6100A17 (Right hand thread), 6100B17 (Left hand thread)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eDrag links\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003ePanhard bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating suspension parts on your rock crawler, 4x4, Jeep, sand rail, hot rod, race car, and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".120 Wall \/ Left Hand Thread","offer_id":49236785987841,"sku":"6100B16","price":15.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Right Hand Thread","offer_id":49236785955073,"sku":"6100A16","price":15.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Left Hand Thread","offer_id":49236786053377,"sku":"6100B17","price":15.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Right Hand Thread","offer_id":49236786020609,"sku":"6100A17","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6273.jpg?v=1780789879"},{"product_id":"34-weld-bung-tube-end-for-1-34-od","title":"3\/4\" Weld Bung Tube End For 1-3\/4\" OD","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eHeavy duty 3\/4\" weld bung tube end adapter with 3\/4-16 threaded center hole. 4130 Chromoly construction, with tapered profile, precision machining and fully threaded center hole for easy, convenient fabricating. Essential for building custom tie rods, control arms, sway bar links and more. Fits 1.75\" OD round DOM tubing with .095 or .120 wall thickness.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eTapered Profile\u003c\/li\u003e\n\u003cli\u003eThread: Female 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eFits .095 wall or .120 wall tubing (be sure to choose when ordering)\u003c\/li\u003e\n\u003cli\u003eAvailable in right and left hand thread\u003c\/li\u003e\n\u003cli\u003eThreaded all the way through\u003c\/li\u003e\n\u003cli\u003e4130 Chromoly Steel Construction\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in 2 sizes for different wall thicknesses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e.095 Wall\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFits Tube Size: 1.75\" OD x .095 Wall x 1.56\" ID\u003c\/li\u003e\n\u003cli\u003eThread: Female 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003ePart Numbers: 6100A14 (Right hand thread), 6100B14 (Left hand thread)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e.120 Wall\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFits Tube Size: 1.75\" OD x .120 Wall x 1.51\" ID\u003c\/li\u003e\n\u003cli\u003eThread: Female 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003ePart Numbers: 6100A15 (Right hand thread), 6100B15 (Left hand thread)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eDrag links\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003ePanhard bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating suspension parts on your rock crawler, 4x4, Jeep, sand rail, hot rod, race car, and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ Left Hand Thread","offer_id":49236786774273,"sku":"6100B14","price":15.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Right Hand Thread","offer_id":49236786872577,"sku":"6100A14","price":15.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Left Hand Thread","offer_id":49236786839809,"sku":"6100B15","price":15.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ Right Hand Thread","offer_id":49236786807041,"sku":"6100A15","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6279.jpg?v=1780789925"},{"product_id":"78-weld-bung-tube-end-for-1-34-od","title":"7\/8\" Weld Bung Tube End For 1-3\/4\" OD","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eHeavy duty 7\/8\" weld bung tube end adapter with 7\/8-14 threaded center hole. 4130 Chromoly construction, with tapered profile, precision machining and fully threaded center hole for easy, convenient fabricating. Essential for building custom tie rods, control arms, sway bar links and more. Fits 1.75\" OD round DOM tubing with .120 or .250 wall thickness.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eTapered Profile\u003c\/li\u003e\n\u003cli\u003eThread: Female 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eFits .120 wall or .250 wall tubing (be sure to choose when ordering)\u003c\/li\u003e\n\u003cli\u003eAvailable in right and left hand thread\u003c\/li\u003e\n\u003cli\u003eThreaded all the way through\u003c\/li\u003e\n\u003cli\u003e4130 Chromoly Steel\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eAvailable in 2 sizes for different wall thicknesses:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e.120 Wall\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFits Tube Size: 1.75\" OD x .120 Wall x 1.51\" ID\u003c\/li\u003e\n\u003cli\u003eThread: Female 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003ePart Numbers: 6100A18 (Right hand thread), 6100B18 (Left hand thread)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e.250 Wall\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003eFits Tube Size: 1.75\" OD x .250 Wall x 1.25\" ID\u003c\/li\u003e\n\u003cli\u003eThread: Female 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003ePart Numbers: 6100A19 (Right hand thread), 6100B19 (Left hand thread)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eDrag links\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003ePanhard bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating suspension parts on your rock crawler, 4x4, Jeep, sand rail, hot rod, race car, and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".120 Wall \/ Left Hand Thread","offer_id":49236787527937,"sku":"6100B18","price":15.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Left Hand Thread","offer_id":49236787593473,"sku":"6100B19","price":15.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Right Hand Thread","offer_id":49236787560705,"sku":"6100A19","price":15.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Right Hand Thread","offer_id":49236787626241,"sku":"6100A18","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6287.jpg?v=1780789954"},{"product_id":"dzus-tab-plate-kits-dimpled-center","title":"Dzus Tab Plate Kits - Dimpled Center","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Pre-assembled DZUS Tab Kit with 7\/16\" Flat Head Buttons\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur Dzus tab kits are just what you need to attach aluminum panels when fabricating custom doors, roof, bed, fenders, dash panels and more. The tabs in our kits come already assembled, with the spring pre-riveted to save you time. Tab edges are rolled for easy placement and flat head 1\/4 turn button fasteners in 7\/16 diameter allow for a clean, sleek, professional look. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- Rolled edge tabs with dimpled center\u003cbr\u003e- Zinc plated steel springs at 1.375\" on center\u003cbr\u003e- Pre-assembled: spring comes riveted to tab - a huge time saver\u003cbr\u003e- Flat top slotted buttons with tapered seat for dimpled tabs\u003cbr\u003e- Buttons: 7\/16 Aluminum slotted top 1\/4 turn buttons with .500\" grip\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e5 Pack Kit includes:\u003c\/strong\u003e\u003cbr\u003e- (5) Dzus tab plates with spring and rivets pre-installed\u003cbr\u003e- (5) Dzus button 7\/16 Diameter x 1\/2\" depth anodized Silver\u003cbr\u003e\u003cbr\u003eAlso available in 10, 15, and 20 pack kits. Be sure to select the correct kit before ordering\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerfect for fabricating custom panels for:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eAuto - Racing - 4x4 - Rock Crawler - Sand Rail - Dune Buggy - UTV\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"5 Pack","offer_id":49236788248833,"sku":"6100B20","price":25.0,"currency_code":"USD","in_stock":false},{"title":"10 Pack","offer_id":49236788281601,"sku":"6100B21","price":45.0,"currency_code":"USD","in_stock":false},{"title":"15 Pack","offer_id":49236788314369,"sku":"6100B22","price":62.0,"currency_code":"USD","in_stock":false},{"title":"20 Pack","offer_id":49236788347137,"sku":"6100B23","price":71.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/9550.jpg?v=1780789984"},{"product_id":"175-od-steel-tube-clamp-for-rzr-roll-cage","title":"1.75\" OD Steel Tube Clamp for RZR Roll Cage","description":"\n\u003cp\u003e\u003cstrong\u003eHeavy Duty Weldable Split Collar Steel Tube Clamp for 1.75\" Round Tubing - for Fabricating UTV Roll Cage Accessories\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e50 Caliber Racing heavy duty, weldable steel split collar tube clamp. Made from solid DOM tube, not cast. CNC machined for accurate fit and finish. 6 Bolt design for super strong clamping force. Threaded holes on clamp side are not drilled through, providing the largest weldable surface possible. Comes with black oxide surface finish for corrosion resistance. Just what you need for fabricating bolt-on accessories like light bar racks, cooler racks, spare tire carriers, V-bars, and more. The possibilities are endless.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* Price is for one clamp\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Specifications:\u003c\/strong\u003e\u003cbr\u003e- Made from solid DOM steel tubing\u003cbr\u003e- Precision CNC machined\u003cbr\u003e- For use with 1.75\" O.D round tubing\u003cbr\u003e- Clamp ID: 1-11\/16\" (slightly undersized, for clamp force)\u003cbr\u003e- Clamp OD: 2-1\/4\"\u003cbr\u003e- Clamp Thickness: 5\/16\"\u003cbr\u003e- Clamp Width: 1.75\"\u003cbr\u003e- 6 Bolt Allen Head Design\u003cbr\u003e- Heavy duty clamp made for welding\u003cbr\u003e- Raw steel with black oxide finish\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits 1.75\" roll cage bars on the following UTVs:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePOLARIS\u003c\/strong\u003e\u003cbr\u003e- RZR 570, 800, XP900\u003cbr\u003e- RZR 900, S 1000, Trail 900\u003cbr\u003e- RZR XP1000\u003cbr\u003e- RZR XP Turbo, Turbo S\u003cbr\u003e- Ranger 570, 800, XP 800\u003cbr\u003e- ACE 570\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eHONDA\u003c\/strong\u003e\u003cbr\u003e- Pioneer+\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eARCTIC CAT\u003c\/strong\u003e\u003cbr\u003e- Wildcat, Wildcat X, Wildcat XX, Trail, Prowler\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCFMOTO\u003c\/strong\u003e\u003cbr\u003eZForce 800, ZForce 1000\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eYAMAHA\u003c\/strong\u003e\u003cbr\u003e- Rhino\u003cbr\u003e- YXZ1000R\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eKAWASAKI\u003c\/strong\u003e\u003cbr\u003e- Teryx KRX\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eMAHINDRA\u003c\/strong\u003e\u003cbr\u003e- Roxor\u003cbr\u003e\u003cbr\u003eWill also fit many other UTVs and off-road vehicles with a bumper or roll cage made from 1.75\" round tubing. If your rock crawler, sand rail, Jeep, 4x4, or race car uses 1.75\" tubing, it will fit.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Used to fabricate bolt on accessories such as:\u003c\/strong\u003e \u003cbr\u003e- Light bar rack\u003cbr\u003e- Cooler rack\u003cbr\u003e- Spare tire carrier\u003cbr\u003e- Intrusion bar (V-bar) \u003cbr\u003e- Roll Cage Braces\u003cbr\u003e- Harness Bars\u003cbr\u003e- Lighted whip tabs\u003cbr\u003e- The possibilities are endless! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is made from raw steel with black oxide finish, and will require surface prep before welding \/ painted \/ coating by end user.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236880851201,"sku":"Fab100A1","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/10187.jpg?v=1780793398"},{"product_id":"tube-clamp-175-tubing-bolt-on","title":"Tube Clamp 11\/16\" Wide for 1.75\" OD Roll Bar","description":"\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Weld On Tube Clamp for Fabricating Bolt-on Accessories\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eCNC machined for accurate fit. Just what you need for fabricating bolt-on accessories like light bar racks, cooler racks, spare tire carriers, V-bars, and more. The possibilities are endless.\u003c\/p\u003e\n\u003cp\u003e* Price is for one clamp\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e- 1.75\" ID - fits 1.75\" OD size tubing\u003cbr\u003e- 11\/16\" Wide\u003cbr\u003e- 5\/16\" Thick\u003cbr\u003e- 2 Bolt Allen Head Design\u003cbr\u003e- High Strength Steel Construction\u003cbr\u003e- CNC Machined\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUsed to fabricate bolt on accessories such as:\u003c\/strong\u003e\u003cbr\u003e- Light bar rack\u003cbr\u003e- Cooler rack\u003cbr\u003e- Spare tire carrier\u003cbr\u003e- Intrusion bar (V-bar) \u003cbr\u003e- Roll Cage Braces\u003cbr\u003e- Harness Bars\u003cbr\u003e- Whip light tabs\u003cbr\u003e- The possibilities are endless!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003cbr\u003e- Split Collar Tube Clamp\u003cbr\u003e- 2 Bolts\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236881080577,"sku":"FAB100A4","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6893.jpg?v=1780793434"},{"product_id":"0-od-steel-tube-clamp-for-pro-xp-roll-cage","title":"2.0\" OD Steel Tube Clamp for PRO XP Roll Cage","description":"\u003cp\u003e\u003cstrong\u003eHeavy Duty Weldable Split Collar Steel Tube Clamp for 2\" O.D. Round Tubing - for Fabricating UTV Roll Cage Accessories\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eHeavy duty, weldable steel split collar tube clamp. Made from solid DOM tube, not cast. CNC machined for accurate fit and finish. 6 Bolt design for super strong clamping force. Threaded holes on clamp side are not drilled through, providing the largest weldable surface possible. Comes with black oxide surface finish for corrosion resistance. Just what you need for fabricating bolt-on accessories like light bar racks, cooler racks, spare tire carriers, V-bars, and more. The possibilities are endless.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* Price is for one clamp\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications\u003c\/strong\u003e: \u003cbr\u003e- Made from solid DOM steel tubing\u003cbr\u003e- Precision CNC machined\u003cbr\u003e- For use with 2\" O.D round tubing\u003cbr\u003e- Clamp ID: 1 15\/16\" (slightly undersized, for clamp force)\u003cbr\u003e- Clamp OD: 2 3\/4\"\u003cbr\u003e- Clamp Thickness: 3\/8\"\u003cbr\u003e - Clamp Width: 2\"\u003cbr\u003e - 6 Bolt Allen Head Design\u003cbr\u003e- Heavy duty clamp made for welding\u003cbr\u003e- Raw steel with black oxide finish\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eFits 2\" roll cage bars on the following UTVs:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003ePOLARIS\u003c\/strong\u003e\u003cbr\u003e - PRO XP (2020+)\u003cbr\u003e - PRO XP 4 (2020+)\u003cbr\u003e - Turbo R (2023+)\u003cbr\u003e - Turbo 4 R (2023+)\u003cbr\u003e- PRO R (2023+)\u003cbr\u003e- PRO 4 R (2023+) \u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eYAMAHA\u003c\/strong\u003e\u003cbr\u003e- YXZ1000R (2016-2020)\u003cbr\u003e - YXZ1000R SE (2016-2020)\u003cbr\u003e - Viking 2 Seat (2014-2019)\u003cbr\u003e - Viking EPS (2014-2019)\u003cbr\u003e - Viking VI (2014-2019)\u003cbr\u003e\u003cbr\u003eWill also fit many other UTVs and off-road vehicles with a bumper or roll cage made from 2\" round tubing. If your rock crawler, sand rail, Jeep, 4x4, or race car uses 1.75\" tubing, it will fit.. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerfect for fabricating bolt on accessories such as:\u003c\/strong\u003e\u003cbr\u003e - Light bar rack\u003cbr\u003e - Cooler rack\u003cbr\u003e - Spare tire carrier\u003cbr\u003e - Intrusion bar (V-bar) \u003cbr\u003e - Roll Cage Braces\u003cbr\u003e - Harness Bars\u003cbr\u003e - Whip light tabs\u003cbr\u003e - The possibilities are endless! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is made from raw steel with black oxide finish, therefore may have light surface scale, and will require surface prep before painted\/coating by end user.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236881146113,"sku":"FAB100A2","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/10195.jpg?v=1780793477"},{"product_id":"15-od-steel-tube-clamp-for-utv-roll-cage","title":"1.5\" OD Steel Tube Clamp for UTV Roll Cage","description":"\u003cp\u003e\u003cstrong\u003eHeavy Duty Weldable Split Collar Steel Tube Clamp for 1.5\" Round Tubing - for Fabricating UTV Roll Cage Accessories\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eHeavy duty, weldable steel split collar tube clamp. Made from solid DOM tube, not cast. CNC machined for accurate fit and finish. 6 Bolt design for super strong clamping force. Threaded holes on clamp side are not drilled through, providing the largest weldable surface possible. Comes with black oxide surface finish for corrosion resistance. Just what you need for fabricating bolt-on accessories like light bar racks, cooler racks, spare tire carriers, V-bars, and more. The possibilities are endless.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* Price is for one clamp\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e - Made from solid DOM steel tubing\u003cbr\u003e - Precision CNC machined\u003cbr\u003e - For use with 1.5\" O.D round tubing\u003cbr\u003e - Clamp ID: 1 7\/16\" (slightly undersized, for clamp force)\u003cbr\u003e - Clamp OD: 2 1\/4\"\u003cbr\u003e - Clamp Thickness: 5\/16\"\u003cbr\u003e - Clamp Width: 1.75\"\u003cbr\u003e - 6 Bolt Allen Head Design\u003cbr\u003e - Heavy duty clamp made for welding\u003cbr\u003e - Raw steel with black oxide finish \u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eFits 1.5\" roll cage bars on the following UTVs:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e Kawasaki Teryx KRX 1000 : 2020+\u003cbr\u003e Kawasaki Teryx KRX 4 1000 : 2023+\u003cbr\u003e Polaris Ace : 2014+\u003cbr\u003e Polaris Ace 570 : 2015+\u003cbr\u003e Polaris RZR Pro R : 2022+\u003cbr\u003e Polaris RZR Pro R 4 : 2022+\u003cbr\u003e Polaris RZR Turbo R : 2022+\u003cbr\u003e Polaris RZR Turbo R 4 : 2022+\u003cbr\u003e Yamaha Rhino : 2004-2011\u003cbr\u003e Yamaha Viking : 2014+\u003cbr\u003e Yamaha Wolverine : 2015+\u003cbr\u003e Yamaha Wolverine X2 : 2019+\u003cbr\u003e Yamaha Wolverine X4 : 2018+\u003cbr\u003e Yamaha Wolverine RMAX 2 : 2021+\u003cbr\u003e Yamaha Wolverine RMAX 4 : 2021+\u003cbr\u003e Yamaha YXZ : 2016+\u003cbr\u003e\u003cbr\u003e Will also fit many Chinese made UTV models and anything made from 1.5\" round tubing. If your rock crawler, sand rail, Jeep, 4x4, or race car roll cage is made from 1.5\" tubing, it will fit. \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003ePerfect for fabricating bolt on accessories such as:\u003c\/strong\u003e\u003cbr\u003e- Light bar rack\u003cbr\u003e- Cooler rack\u003cbr\u003e- Spare tire carrier\u003cbr\u003e- Intrusion bar (V-bar)\u003cbr\u003e- Roll Cage Braces\u003cbr\u003e- Harness Bars\u003cbr\u003e- Whip light tabs\u003cbr\u003e- The possibilities are endless!\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThis is made from raw steel with black oxide finish, and will require surface prep before welding \/ painted \/ coating by end user.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236881211649,"sku":"FAB100A3","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/10180.jpg?v=1780793507"},{"product_id":"1875-od-steel-tube-clamp-for-can-am-roll-cage","title":"1.875\" OD Steel Tube Clamp for Can-Am Roll Cage","description":"\u003cp\u003e\u003cstrong\u003eHeavy Duty Weldable Split Collar Steel Tube Clamp for 1.875\" (1 7\/8\") O.D. Round Tubing - for Fabricating UTV Roll Cage Accessories\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eHeavy duty, weldable steel split collar tube clamp. Made from solid DOM tube, not cast. CNC machined for accurate fit and finish. 6 Bolt design for super strong clamping force. Threaded holes on clamp side are not drilled through, providing the largest weldable surface possible. Comes with black oxide surface finish for corrosion resistance. Just what you need for fabricating bolt-on accessories like light bar racks, cooler racks, spare tire carriers, V-bars, and more. The possibilities are endless.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e* Price is for one clamp\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e Specifications:\u003c\/strong\u003e \u003cbr\u003e - Made from solid DOM steel tubing\u003cbr\u003e - Precision CNC machined\u003cbr\u003e - For use with 1.875\" O.D (1 7\/8\") round tubing\u003cbr\u003e - Clamp ID: 1 13\/16\" (slightly undersized, for clamp force)\u003cbr\u003e - Clamp OD: 2 5\/8\"\u003cbr\u003e - Clamp Thickness: 3\/8\"\u003cbr\u003e - Clamp Width: 1.75\"\u003cbr\u003e - 6 Bolt Allen Head Design\u003cbr\u003e - Heavy duty clamp made for welding\u003cbr\u003e - Raw steel with black oxide finish \u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eFits 1.875\" roll cage bars on the following UTVs:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e CAN-AM\u003c\/strong\u003e\u003cbr\u003e - Maverick X3, X3 Max (2017+)\u003cbr\u003e - Maverick Sport, Sport Max, Trail (2018+) - horizontal bars\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eKAWASAKI\u003c\/strong\u003e\u003cbr\u003e - Mule FXT (2015+)\u003cbr\u003e - Teryx, Teryx 4 (2008+)\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eHISUN\u003c\/strong\u003e\u003cbr\u003e - Sector 750, 750 Crew (2016+)\u003cbr\u003e - Sector 1000, 1000 Crew (2016+)\u003cbr\u003e\u003cbr\u003e Will also fit many other UTVs and off-road vehicles with a bumper or roll cage made from 1.875\" round tubing. If your rock crawler, sand rail, Jeep, 4x4, or race car uses 1.875\" tubing, it will fit.\u003cbr\u003e\u003cbr\u003e \u003cstrong\u003eUsed to fabricate bolt on accessories such as: \u003c\/strong\u003e\u003cbr\u003e- Light bar rack\u003cbr\u003e - Cooler rack\u003cbr\u003e - Spare tire carrier\u003cbr\u003e - Intrusion bar (V-bar) \u003cbr\u003e - Roll Cage Braces\u003cbr\u003e - Harness Bars\u003cbr\u003e - Lighted whip tabs\u003cbr\u003e - The possibilities are endless! \u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e This is made from raw steel with black oxide finish, and will require surface prep before welding \/ painted \/ coating by end user.\u003c\/p\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236881277185,"sku":"6099","price":29.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/10205.jpg?v=1780793528"},{"product_id":"58-heim-joint","title":"5\/8\" Heim Joint","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eChromoly heim joint rod end with a 5\/8\"-18 thread and 5\/8\" bore. These are some of the heaviest duty heim joints available. Body is built from 4130 Chromoly steel, heat treated and chrome plated for protection. The race is self cleaning and self lubricating with a nylon \/ teflon (PTFE) liner. The ball is 52100 hardened bearing steel heat treated, chrome plated, and rated at nearly 18,000 pounds. The load rating and size make these excellent for building custom steering links and suspension arms for UTVs and ATVs. Includes jam nut. Available in RH or LH thread.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel Body\u003c\/li\u003e\n\u003cli\u003ePTFE (Teflon) \/ Nylon Liner\u003c\/li\u003e\n\u003cli\u003e52100 hardened bearing steel ball\u003c\/li\u003e\n\u003cli\u003eChrome plated\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 17,955 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 5\/8\"-18\u003c\/li\u003e\n\u003cli\u003eThread length: 1.63\"\u003c\/li\u003e\n\u003cli\u003eBall Bore: 5\/8\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 1.5\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .562\"\u003c\/li\u003e\n\u003cli\u003eBall bore width: .75\"\u003c\/li\u003e\n\u003cli\u003eThread end to ball center: 2.625\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 5\/8-18 x 5\/8 bore Heim - RH or LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) Jam Nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eDrag links\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003ePanhard bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating suspension parts on your 4x4, sand rail, hot rod, race car, utv and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Male Right Hand Thread","offer_id":49236881473793,"sku":"FAB300A1","price":15.0,"currency_code":"USD","in_stock":false},{"title":"Male Left Hand Thread","offer_id":49236881506561,"sku":"FAB300B1","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/5142.jpg?v=1780793553"},{"product_id":"12-heim-joint","title":"1\/2\" Heim Joint","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eChromoly heim joint rod end with a 1\/2\"-20 thread and 1\/2\" bore. These are some of the heaviest duty heim joints available. Body is built from 4130 Chromoly steel, heat treated and chrome plated for protection. The race is self cleaning and self lubricating with a nylon \/ teflon (PTFE) liner. The ball is 52100 hardened bearing steel heat treated, chrome plated, and rated at over 16,000 pounds. The load rating and size make these excellent for building custom steering and shift linkage for UTVs, ATVs and Go Karts. Includes jam nut. Available in RH or LH thread.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel Body\u003c\/li\u003e\n\u003cli\u003ePTFE (Teflon) \/ Nylon Liner\u003c\/li\u003e\n\u003cli\u003e52100 hardened bearing steel ball\u003c\/li\u003e\n\u003cli\u003eChrome plated\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 16,238 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 1\/2\"-20\u003c\/li\u003e\n\u003cli\u003eThread length: 1.5\"\u003c\/li\u003e\n\u003cli\u003eBall Bore: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 1.312\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .500\"\u003c\/li\u003e\n\u003cli\u003eBall bore width: .625\"\u003c\/li\u003e\n\u003cli\u003eThread end to ball center: 2.438\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 1\/2-20 x 1\/2 bore Heim - RH or LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) Jam Nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eDrag links\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003ePanhard bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003cli\u003eShift linkage\u003c\/li\u003e\n\u003cli\u003eThrottle linkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating linkage and suspension parts on your sand rail, hot rod, race car, utv and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Male Left Hand Thread","offer_id":49236881539329,"sku":"FAB300B2","price":12.0,"currency_code":"USD","in_stock":true},{"title":"Male Right Hand Thread","offer_id":49236881572097,"sku":"FAB300A2","price":12.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6241.jpg?v=1780793574"},{"product_id":"34-heim-joint","title":"3\/4\" Heim Joint","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eChromoly heim joint rod end with a 3\/4\"-16 thread and 3\/4\" bore. These are some of the heaviest duty heim joints available. Body is built from 4130 Chromoly steel, heat treated and chrome plated for protection. The race is self cleaning and self lubricating with a nylon \/ teflon (PTFE) liner. The ball is 52100 hardened bearing steel heat treated, chrome plated, and rated at over 28,000 pounds. The load rating and size make these excellent for building custom steering and suspension linkage for Jeeps, buggies, trucks, 4x4s and more. Includes jam nut. Available in RH or LH thread.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel Body\u003c\/li\u003e\n\u003cli\u003ePTFE (Teflon) \/ Nylon Liner\u003c\/li\u003e\n\u003cli\u003e52100 hardened bearing steel ball\u003c\/li\u003e\n\u003cli\u003eChrome plated\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 28,081 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eThread length: 1.75\"\u003c\/li\u003e\n\u003cli\u003eBall Bore: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 1.750\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .687\"\u003c\/li\u003e\n\u003cli\u003eBall bore width: .875\"\u003c\/li\u003e\n\u003cli\u003eThread end to ball center: 2.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 3\/4-16 x 3\/4 bore Heim - RH or LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) Jam Nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eDrag links\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003ePanhard bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003cli\u003eShift linkage\u003c\/li\u003e\n\u003cli\u003eThrottle linkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating linkage and suspension parts on your sand rail, hot rod, race car, 4x4, UTV and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Male Left Hand Thread","offer_id":49236881637633,"sku":"FAB300B3","price":19.0,"currency_code":"USD","in_stock":true},{"title":"Male Right Hand Thread","offer_id":49236881670401,"sku":"FAB300A3","price":19.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6252.jpg?v=1780793595"},{"product_id":"78-heim-joint","title":"7\/8\" Heim Joint","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eChromoly heim joint rod end with a 7\/8\"-14 thread and 7\/8\" bore. These are some of the heaviest duty heim joints available. Body is built from 4130 Chromoly steel, heat treated and chrome plated for protection. The race is self cleaning and self lubricating with a nylon \/ teflon (PTFE) liner. The ball is 52100 hardened bearing steel heat treated, chrome plated, and rated at over 45,000 pounds. The load rating and size make these excellent for building custom steering and suspension linkage for Rock Crawlers, 4x4s, Jeeps, Race Cars, Sand Rails, Street Rods and more. Includes jam nut. Available in RH or LH thread.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel Body\u003c\/li\u003e\n\u003cli\u003ePTFE (Teflon) \/ Nylon Liner\u003c\/li\u003e\n\u003cli\u003e52100 hardened bearing steel ball\u003c\/li\u003e\n\u003cli\u003eChrome plated\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 45,051 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eThread length: 2.00\"\u003c\/li\u003e\n\u003cli\u003eBall Bore: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 2.00\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .765\"\u003c\/li\u003e\n\u003cli\u003eBall bore width: .875\"\u003c\/li\u003e\n\u003cli\u003eThread end to ball center: 3.375\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 7\/8-14 x 7\/8 bore Heim - RH or LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) Jam Nut\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eDrag links\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003ePanhard bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003cli\u003eShift linkage\u003c\/li\u003e\n\u003cli\u003eThrottle linkage\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating linkage and suspension parts on your sand rail, hot rod, race car, 4x4, UTV, rock crawler and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Male Left Hand Thread","offer_id":49236881768705,"sku":"FAB300B4","price":24.0,"currency_code":"USD","in_stock":true},{"title":"Male Right Hand Thread","offer_id":49236881801473,"sku":"FAB300A4","price":24.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6254.jpg?v=1780793616"},{"product_id":"high-misalignment-spacers-chromoly-with-zinc-plating","title":"High Misalignment Spacers - Chromoly with Zinc Plating","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eHigh misalignment spacers (HMS) for heim joints, sold in a pack of 2. Made from zinc plated 4130 Chromoly steel. Available in several sizes to fit any fabrication project. Used to fabricate custom tie rods, control arms, sway bar links, and more. Price is for one pair of spacers, enough for one Heim joint.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eMade from 4130 Chromoly steel alloy\u003c\/li\u003e\n\u003cli\u003eZinc coated for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eSold in a pack of 2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSizes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1\/2\"\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e.375\" ID x .494\" OD x .617\" W\u003c\/li\u003e\n\u003cli\u003e1\/2\" Hole to 3\/8\" bolt size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5\/8\"\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e.500\" ID x .619\" OD x .672\" W\u003c\/li\u003e\n\u003cli\u003e5\/8\" Hole to 1\/2\" bolt size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3\/4\"\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e.625\" ID x .743\" OD x .922\" W\u003c\/li\u003e\n\u003cli\u003e3\/4\" Hole to 5\/8\" bolt size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e7\/8\"\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e.750\" ID x .869\" OD x .926\" W\u003c\/li\u003e\n\u003cli\u003e7\/8\" Hole to 3\/4\" bolt size\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(2) Misalignment spacers (pack of 2, enough for one heim joint)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eShock mounts\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eLadder Bars\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003ePanhard bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating suspension parts on your 4x4, sand rail, hot rod, race car, utv and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"1\/2\"","offer_id":49236881834241,"sku":"5801","price":18.0,"currency_code":"USD","in_stock":true},{"title":"5\/8\"","offer_id":49236881867009,"sku":"5802","price":18.0,"currency_code":"USD","in_stock":true},{"title":"3\/4\"","offer_id":49236881899777,"sku":"5803","price":19.0,"currency_code":"USD","in_stock":true},{"title":"7\/8\"","offer_id":49236881932545,"sku":"5804","price":22.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6364.jpg?v=1780793639"},{"product_id":"uniballs-05-to-15-bore","title":"Uniballs  0.5\" to 1.5\" Bore","description":"\n\u003cp\u003e\u003cstrong\u003e50 Caliber Racing Heavy Duty Chromoly Uniballs\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eOur uniball spherical bearings are made from chromoly alloy with a self lubricating PTFE (nylon\/teflon) liner for smooth, long lasting performance and easy maintenance. These heavy duty spherical bearings are just what you need for fabricating chassis components like A-arms and radius rods, and are available in many sizes to fit most any off road or race application. Compatible with standard size uniball cups from 50 Caliber Racing, FK, and many other popular manufacturers.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eUniball Specifications:\u003c\/strong\u003e\u003cbr\u003e- 52100 Precision ground steel ball\u003cbr\u003e- Hard Chrome plated bearing\u003cbr\u003e- 4130 Chromoly Outer Race\u003cbr\u003e- Heat treated\u003cbr\u003e- Corrosion resistant coating\u003cbr\u003e- Self-Lubricating PTFE (nylon\/teflon) Liner\u003cbr\u003e- Several sizes available\u003cbr\u003e- Compatible with standard size un-ball cups (fks series)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eAvailable in .50\", .75\", 1\", 1.25\" and 1.5\" bore sizes. We also offer complete kits \u003ca title=\"Uniball Bearings and Cups\" href=\"\/collections\/uniball-bearings\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;text-align:center;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"color:#ffffff;background-color:#cc0000;\"\u003e\u003cstrong\u003ePart #\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"color:#ffffff;background-color:#cc0000;\"\u003e\u003cstrong\u003eBore\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"color:#ffffff;background-color:#cc0000;\"\u003e\u003cstrong\u003eOD\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"color:#ffffff;background-color:#cc0000;\"\u003e\u003cstrong\u003eBall Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"color:#ffffff;background-color:#cc0000;\"\u003e\u003cstrong\u003eRace Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"color:#ffffff;background-color:#cc0000;\"\u003e\u003cstrong\u003eLoad Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"color:#ffffff;background-color:#cc0000;\"\u003e\u003cstrong\u003eAlt part #s\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3024\u003c\/td\u003e\n\u003ctd\u003e0.500\u003c\/td\u003e\n\u003ctd\u003e1.0000\u003c\/td\u003e\n\u003ctd\u003e0.500\u003c\/td\u003e\n\u003ctd\u003e0.390\u003c\/td\u003e\n\u003ctd\u003e8,400\u003c\/td\u003e\n\u003ctd\u003eCOM8T, COM8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3028\u003c\/td\u003e\n\u003ctd\u003e0.750\u003c\/td\u003e\n\u003ctd\u003e1.4375\u003c\/td\u003e\n\u003ctd\u003e0.750\u003c\/td\u003e\n\u003ctd\u003e0.593\u003c\/td\u003e\n\u003ctd\u003e31,920\u003c\/td\u003e\n\u003ctd\u003eCOM12T, COM12\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3025\u003c\/td\u003e\n\u003ctd\u003e1.000\u003c\/td\u003e\n\u003ctd\u003e2.1250\u003c\/td\u003e\n\u003ctd\u003e1.375\u003c\/td\u003e\n\u003ctd\u003e1.005\u003c\/td\u003e\n\u003ctd\u003e104,000\u003c\/td\u003e\n\u003ctd\u003eAIN16T, WSSX16T, WPB16T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3026\u003c\/td\u003e\n\u003ctd\u003e1.250\u003c\/td\u003e\n\u003ctd\u003e2.375\u003c\/td\u003e\n\u003ctd\u003e1.187\u003c\/td\u003e\n\u003ctd\u003e0.937\u003c\/td\u003e\n\u003ctd\u003e100,730\u003c\/td\u003e\n\u003ctd\u003eCOMH20, HCOM20, HCOM20T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3027\u003c\/td\u003e\n\u003ctd\u003e1.500\u003c\/td\u003e\n\u003ctd\u003e2.7500\u003c\/td\u003e\n\u003ctd\u003e1.375\u003c\/td\u003e\n\u003ctd\u003e1.094\u003c\/td\u003e\n\u003ctd\u003e135,950\u003c\/td\u003e\n\u003ctd\u003eCOMH24, HCOM24, HCOM24T\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"50 Caliber Racing","offers":[{"title":".50\" Bore","offer_id":49236906934529,"sku":"3024","price":15.0,"currency_code":"USD","in_stock":false},{"title":".75\" Bore","offer_id":49236906967297,"sku":"3028","price":21.0,"currency_code":"USD","in_stock":false},{"title":"1.0\" Bore","offer_id":49236906901761,"sku":"3025","price":39.0,"currency_code":"USD","in_stock":false},{"title":"1.25\" Bore","offer_id":49236906836225,"sku":"3026","price":46.0,"currency_code":"USD","in_stock":true},{"title":"1.5\" Bore","offer_id":49236906868993,"sku":"3027","price":59.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/9519.jpg?v=1780794738"},{"product_id":"uniball-kits-05-to-15-bore","title":"Uniball Bearing Kit 0.5\" to 1.5\" Bore","description":"\u003cp\u003e\u003cstrong\u003eUniball Kit: 50 Caliber Racing Heavy Duty Chromoly Spherical Bearing Fabrication Kit\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eComplete kit including bearing, cup and snap ring. Our uniball spherical bearings are made from 4130 chromoly alloy with a self lubricating PTFE (nylon\/teflon) liner for smooth, long lasting performance and easy maintenance. Precision machined cup includes a matching spring steel snap ring retainer.  The size and load rating make them perfect for fabricating chassis components like A-arms and radius rods, and are available in many sizes to fit most any off road or race application.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eBearing\u003c\/strong\u003e:\u003cbr\u003e- 52100 Precision ground steel ball\u003cbr\u003e- Hard Chrome plated bearing\u003cbr\u003e- 4130 Chromoly Outer Race\u003cbr\u003e- Heat treated\u003cbr\u003e- Corrosion resistant coating\u003cbr\u003e- Self-Lubricating PTFE (nylon\/teflon) Liner\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCup\u003c\/strong\u003e:\u003cbr\u003e- 4130 Chromoly Steel\u003cbr\u003e- Precision machined\u003cbr\u003e- Snap ring retainer included \u003cbr\u003e\u003cbr\u003e\u003cbr\u003eAvailable in .5\", .75\", 1\", 1.25\" and 1.5\" bore sizes. We also offer replacement spherical bearings \u003ca href=\"\/collections\/uniball-bearings\" title=\"Uniball Bearings and Cups\"\u003ehere\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ctable style=\"width:100%;border-collapse:collapse;text-align:center;font-family:Arial;\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd style=\"color:#ffffff;background-color:#cc0000;\"\u003e\u003cstrong\u003ePart #\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"color:#ffffff;background-color:#cc0000;\"\u003e\u003cstrong\u003eBearing Center Bore\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"color:#ffffff;background-color:#cc0000;\"\u003e\u003cstrong\u003eCup Diameter\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"color:#ffffff;background-color:#cc0000;\"\u003e\u003cstrong\u003eCup Width\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"color:#ffffff;background-color:#cc0000;\"\u003e\u003cstrong\u003eLoad Rating\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3024B\u003c\/td\u003e\n\u003ctd\u003e0.500\"\u003c\/td\u003e\n\u003ctd\u003e1.250\"\u003c\/td\u003e\n\u003ctd\u003e.750\"\u003c\/td\u003e\n\u003ctd\u003e8,400\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3028B\u003c\/td\u003e\n\u003ctd\u003e0.750\"\u003c\/td\u003e\n\u003ctd\u003e1.750\"\u003c\/td\u003e\n\u003ctd\u003e1.000\"\u003c\/td\u003e\n\u003ctd\u003e31,920\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3025B\u003c\/td\u003e\n\u003ctd\u003e1.000\"\u003c\/td\u003e\n\u003ctd\u003e2.625\"\u003c\/td\u003e\n\u003ctd\u003e1.500\"\u003c\/td\u003e\n\u003ctd\u003e104,000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3026B\u003c\/td\u003e\n\u003ctd\u003e1.250\"\u003c\/td\u003e\n\u003ctd\u003e2.875\"\u003c\/td\u003e\n\u003ctd\u003e1.500\"\u003c\/td\u003e\n\u003ctd\u003e100,730\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3027B\u003c\/td\u003e\n\u003ctd\u003e1.500\"\u003c\/td\u003e\n\u003ctd\u003e3.500\"\u003c\/td\u003e\n\u003ctd\u003e1.625\"\u003c\/td\u003e\n\u003ctd\u003e135,950\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e","brand":"50 Caliber Racing","offers":[{"title":".50\" Bore","offer_id":49236909457665,"sku":"3024B","price":32.0,"currency_code":"USD","in_stock":true},{"title":".75\" Bore","offer_id":49236909490433,"sku":"3028B","price":43.0,"currency_code":"USD","in_stock":false},{"title":"1.0\" Bore","offer_id":49236909424897,"sku":"3025B","price":63.0,"currency_code":"USD","in_stock":false},{"title":"1.25\" Bore","offer_id":49236909359361,"sku":"3026B","price":73.0,"currency_code":"USD","in_stock":true},{"title":"1.5\" Bore","offer_id":49236909392129,"sku":"3027B","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/8414.jpg?v=1780794773"},{"product_id":"50cal-bolt-glue-250mlthread-locker","title":"50 Caliber Racing 271 Red Bolt Glue Thread Locker 250ml","description":"\u003cdiv class=\"prod-desc\"\u003e\n\u003ch2\u003e50 Caliber Racing Red Bolt Glue - 271 High Strength Thread Locker 250ml Big Bottle\u003c\/h2\u003e\n\u003cp\u003eIf you’re tired of bolts backing out every time the ride gets rough, this is the fix. 50 Caliber Racing Red Bolt Glue is built for extreme off road abuse where vibration, heat, and hard riding constantly try to shake your hardware loose. Lock it down once and ride with confidence.\u003c\/p\u003e\n\u003cp\u003eThis high strength 271 thread locker is perfect for engines, suspension, drivetrain, and any fasteners that take a beating. Whether you’re hitting dunes, rock crawling, racing, or just riding hard, this helps keep everything tight so you’re not wrenching after every ride.\u003c\/p\u003e\n\u003cp\u003eThe oversized 250ml bottle gives you plenty of product for multiple builds and regular maintenance. It’s a must-have in any off road garage or race trailer.\u003c\/p\u003e\n\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e271 High strength formula built for extreme vibration\u003c\/li\u003e\n\u003cli\u003eKeeps critical nuts and bolts locked down\u003c\/li\u003e\n\u003cli\u003eIdeal for engines, suspension, and drivetrain parts\u003c\/li\u003e\n\u003cli\u003eWorks on most fasteners in off road applications\u003c\/li\u003e\n\u003cli\u003eHelps reduce maintenance and prevent trail failures\u003c\/li\u003e\n\u003cli\u003e250ml - This is the BIG Bottle!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236925415681,"sku":"101","price":55.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/2992.jpg?v=1780798143"},{"product_id":"50cal-bolt-glue-50mlthread-locker","title":"50 Caliber Racing 271 Red Bolt Glue Thread Locker 50ml","description":"\u003cdiv class=\"prod-desc\"\u003e\n\u003ch2\u003e50 Caliber Racing Red Bolt Glue - 271 High Strength Thread Locker 50ml Bottle\u003c\/h2\u003e\n\u003cp\u003eIf you’re tired of bolts backing out every time the ride gets rough, this is the fix. 50 Caliber Racing Red Bolt Glue is built for extreme off road abuse where vibration, heat, and hard riding constantly try to shake your hardware loose. Lock it down once and ride with confidence.\u003c\/p\u003e\n\u003cp\u003eThis high strength 271 thread locker is perfect for engines, suspension, drivetrain, and any fasteners that take a beating. Whether you’re hitting dunes, rock crawling, racing, or just riding hard, this helps keep everything tight so you’re not wrenching after every ride.\u003c\/p\u003e\n\u003cp\u003eThe large 50ml bottle gives you plenty of product for builds and regular maintenance. It’s a must-have in any off road garage or race trailer.\u003c\/p\u003e\n\u003ch3\u003eProduct Highlights\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e271 High strength formula built for extreme vibration\u003c\/li\u003e\n\u003cli\u003eKeeps critical nuts and bolts locked down\u003c\/li\u003e\n\u003cli\u003eIdeal for engines, suspension, and drivetrain parts\u003c\/li\u003e\n\u003cli\u003eWorks on most fasteners in off road applications\u003c\/li\u003e\n\u003cli\u003eHelps reduce maintenance and prevent trail failures\u003c\/li\u003e\n\u003cli\u003e50ml - bottle size!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":"Default Title","offer_id":49236925448449,"sku":"102","price":15.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/2993.jpg?v=1780798152"},{"product_id":"4-link-rod-end-kit-78-chromoly-heim-15-od-tubing","title":"7\/8 Chromoly Heim Joint 4 Link Rod End Kit for 1.5\" Tubing","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e4 Link Rod end fabrication kit complete with 7\/8 x 7\/8 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.5\" OD tubing, with wall thickness of .120 or .250. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building a custom 4 link suspension setup, radius rods and control arms for Jeeps, buggies, rock crawlers, sand rails, trucks and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003e52100 hardened bearing steel ball\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 45,051 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eThread length: 2.00\"\u003c\/li\u003e\n\u003cli\u003eBore: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 2.00\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .765\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 3.375\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.26\" ID\u003c\/li\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.250 Wall\u003c\/strong\u003e x 1.00\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.750\" ID x .869\" OD x .926\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/4\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(4) 7\/8-14 x 7\/8\" bore Heims - RH Thread\u003c\/li\u003e\n\u003cli\u003e(4) 7\/8-14 x 7\/8\" bore Heims - LH Thread\u003c\/li\u003e\n\u003cli\u003e(4) RH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(4) LH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(4) RH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(4) LH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (16) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e3 and 4 Link Radius Rods\u003c\/li\u003e\n\u003cli\u003eWatts Links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003ePanhard bar \/ trackbar\u003c\/li\u003e\n\u003cli\u003eHi Steer\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering linkage on your 4x4, rock crawler, sand rail, hot rod, race car, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".120 Wall \/ No","offer_id":49236956152065,"sku":"6101A40","price":242.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Yes","offer_id":49236956250369,"sku":"6101B40","price":262.0,"currency_code":"USD","in_stock":false},{"title":".250 Wall \/ No","offer_id":49236956217601,"sku":"6101A45","price":242.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Yes","offer_id":49236956184833,"sku":"6101B45","price":262.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7274.jpg?v=1780802095"},{"product_id":"78-rod-end-heim-joint-kit-for-15-od-round-tube","title":"7\/8 Chromoly Heim Joint Kit – 1.5\" OD Tubing","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eSingle joint rod end kit complete with a 7\/8 x 7\/8 heat treated chromoly heim joint, jam nut, and weld in bung (tube adapter). Designed specifically for 1.5\" OD tubing, with wall thickness of .120 or .250. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building custom steering and suspension links for Jeeps, buggies, rock crawlers, sand rails, trucks and more. Includes one heim joint, jam nut and bung. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003e52100 hardened bearing steel ball\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 45,051 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eThread length: 2.00\"\u003c\/li\u003e\n\u003cli\u003eBore: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 2.00\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .765\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 3.375\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.26\" ID\u003c\/li\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.250 Wall\u003c\/strong\u003e x 1.00\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.750\" ID x .869\" OD x .926\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/4\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 7\/8-14 x 7\/8 bore Heim - RH or LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePanhard bar \/ Trackbar\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e3 Link \/ 4 Link\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, rock crawler, sand rail, hot rod, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".120 Wall \/ Left Hand Thread \/ No","offer_id":49236956446977,"sku":"6101A37","price":35.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Left Hand Thread \/ Yes","offer_id":49236956414209,"sku":"6101B37","price":39.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ Right Hand Thread \/ No","offer_id":49236956381441,"sku":"6101A36","price":35.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Left Hand Thread \/ No","offer_id":49236956578049,"sku":"6101A42","price":35.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Left Hand Thread \/ Yes","offer_id":49236956545281,"sku":"6101B42","price":39.0,"currency_code":"USD","in_stock":false},{"title":".250 Wall \/ Right Hand Thread \/ No","offer_id":49236956512513,"sku":"6101A41","price":35.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Right Hand Thread \/ Yes","offer_id":49236956479745,"sku":"6101B41","price":39.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ Right Hand Thread \/ Yes","offer_id":49236956610817,"sku":"6101B36","price":39.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7291.jpg?v=1780802145"},{"product_id":"78-rod-end-kit-for-15-od-tube-lht-rht-heim-joints","title":"7\/8 Chromoly Heim Joint Rod End Kit for 1.5\" Tubing – Panhard Bar","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003ePanhard bar rod end fabrication kit complete with 7\/8 x 7\/8 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.5\" OD tubing, with wall thickness of .120 or .250. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building a custom panhard bar (trackbar), tie rods and radius arms for Jeeps, buggies, rock crawlers, sand rails, trucks and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003e52100 hardened bearing steel ball\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 45,051 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eThread length: 2.00\"\u003c\/li\u003e\n\u003cli\u003eBore: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 2.00\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .765\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 3.375\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.26\" ID\u003c\/li\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.250 Wall\u003c\/strong\u003e x 1.00\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.750\" ID x .869\" OD x .926\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/4\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 7\/8-14 x 7\/8 bore Heim - RH Thread\u003c\/li\u003e\n\u003cli\u003e(1) 7\/8-14 x 7\/8 bore Heim - LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) RH Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) LH Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) RH Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(1) LH Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (4) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePanhard bar \/ Trackbar\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e3 Link \/ 4 Link\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, rock crawler, sand rail, hot rod, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".120 Wall \/ No","offer_id":49236958576897,"sku":"6101A38","price":68.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Yes","offer_id":49236958675201,"sku":"6101B38","price":68.0,"currency_code":"USD","in_stock":false},{"title":".250 Wall \/ No","offer_id":49236958642433,"sku":"6101A43","price":78.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Yes","offer_id":49236958609665,"sku":"6101B43","price":78.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7316.jpg?v=1780802202"},{"product_id":"sway-bar-link-rod-end-kit-78-chromoly-heim-15-od-tubing","title":"7\/8 Chromoly Heim Joint Rod End Kit for 1.5\" Tubing – Sway Bar Link","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eSway bar link rod end fabrication kit complete with 7\/8 x 7\/8 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.5\" OD tubing, with wall thickness of .120 or .250. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building custom sway bar links, tie rods and radius arms for Jeeps, buggies, rock crawlers, sand rails, trucks and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003e52100 hardened bearing steel ball\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 45,051 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eThread length: 2.00\"\u003c\/li\u003e\n\u003cli\u003eBore: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 2.00\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .765\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 3.375\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.26\" ID\u003c\/li\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.250 Wall\u003c\/strong\u003e x 1.00\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.750\" ID x .869\" OD x .926\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/4\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 7\/8-14 x 7\/8\" bore Heims - RH Thread\u003c\/li\u003e\n\u003cli\u003e(2) 7\/8-14 x 7\/8\" bore Heims - LH Thread\u003c\/li\u003e\n\u003cli\u003e(2) RH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) LH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) RH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(2) LH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (8) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eSway bar end links\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003ePanhard bar \/ Track bar\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e3 Link \/ 4 Link\u003c\/li\u003e\n\u003cli\u003eCustom mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, rock crawler, sand rail, hot rod, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".120 Wall \/ No","offer_id":49236959068417,"sku":"6101A39","price":127.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Yes","offer_id":49236959166721,"sku":"6101B39","price":142.0,"currency_code":"USD","in_stock":false},{"title":".250 Wall \/ No","offer_id":49236959133953,"sku":"6101A44","price":127.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Yes","offer_id":49236959101185,"sku":"6101B44","price":142.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7350.jpg?v=1780802251"},{"product_id":"single-joint-rod-end-78-chromoly-heim-175-od-tubing","title":"7\/8 Chromoly Heim Joint Kit – 1.75\" OD Tubing","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eSingle joint rod end kit complete with a 7\/8 x 7\/8 heat treated chromoly heim joint, jam nut, and weld in bung (tube adapter). Designed specifically for 1.75\" OD tubing, with wall thickness of .120 or .250. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building custom steering and suspension links for Jeeps, buggies, rock crawlers, sand rails, trucks and more. Includes one heim joint, jam nut and bung. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003e52100 hardened bearing steel ball\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 45,051 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eThread length: 2.00\"\u003c\/li\u003e\n\u003cli\u003eBore: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 2.00\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .765\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 3.375\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.51\" ID\u003c\/li\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.250 Wall\u003c\/strong\u003e x 1.25\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.750\" ID x .869\" OD x .926\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/4\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 7\/8-14 x 7\/8 bore Heim - RH or LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePanhard bar \/ Trackbar\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e3 Link \/ 4 Link\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, rock crawler, sand rail, hot rod, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".120 Wall \/ Left Hand Thread \/ No","offer_id":49236959985921,"sku":"6101A47","price":36.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Left Hand Thread \/ Yes","offer_id":49236959953153,"sku":"6101B47","price":41.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ Right Hand Thread \/ No","offer_id":49236959920385,"sku":"6101A46","price":36.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Right Hand Thread \/ Yes","offer_id":49236960149761,"sku":"6101B46","price":41.0,"currency_code":"USD","in_stock":false},{"title":".250 Wall \/ Left Hand Thread \/ No","offer_id":49236960116993,"sku":"6101A52","price":36.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Left Hand Thread \/ Yes","offer_id":49236960084225,"sku":"6101B52","price":41.0,"currency_code":"USD","in_stock":false},{"title":".250 Wall \/ Right Hand Thread \/ No","offer_id":49236960051457,"sku":"6101A51","price":36.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Right Hand Thread \/ Yes","offer_id":49236960018689,"sku":"6101B51","price":41.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7378.jpg?v=1780802299"},{"product_id":"panhard-bar-rod-end-kit-78-chromoly-heim-175-od-tubing","title":"7\/8 Chromoly Heim Joint Rod End Kit for 1.75\" Tubing – Panhard Bar","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003ePanhard bar rod end fabrication kit complete with 7\/8 x 7\/8 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.75\" OD tubing, with wall thickness of .120 or .250. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building a custom panhard bar (trackbar), tie rods and radius arms for Jeeps, buggies, rock crawlers, sand rails, trucks and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003e52100 hardened bearing steel ball\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 45,051 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eThread length: 2.00\"\u003c\/li\u003e\n\u003cli\u003eBore: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 2.00\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .765\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 3.375\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.51\" ID\u003c\/li\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.250 Wall\u003c\/strong\u003e x 1.25\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.750\" ID x .869\" OD x .926\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/4\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 7\/8-14 x 7\/8 bore Heim - RH Thread\u003c\/li\u003e\n\u003cli\u003e(1) 7\/8-14 x 7\/8 bore Heim - LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) RH Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) LH Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) RH Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(1) LH Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (4) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePanhard bar \/ Trackbar\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e3 Link \/ 4 Link\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, rock crawler, sand rail, hot rod, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".120 Wall \/ No","offer_id":49236960182529,"sku":"6101A48","price":71.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Yes","offer_id":49236960280833,"sku":"6101B48","price":81.0,"currency_code":"USD","in_stock":false},{"title":".250 Wall \/ No","offer_id":49236960248065,"sku":"6101A53","price":71.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Yes","offer_id":49236960215297,"sku":"6101B53","price":81.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7402.jpg?v=1780802357"},{"product_id":"sway-bar-link-rod-end-kit-78-chromoly-heim-175-od-tubing","title":"7\/8 Chromoly Heim Joint Rod End Kit for 1.75\" Tubing – Sway Bar Link","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eSway bar link rod end fabrication kit complete with 7\/8 x 7\/8 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.75\" OD tubing, with wall thickness of .120 or .250. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building custom sway bar links, tie rods and radius arms for Jeeps, buggies, rock crawlers, sand rails, trucks and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003e52100 hardened bearing steel ball\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 45,051 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eThread length: 2.00\"\u003c\/li\u003e\n\u003cli\u003eBore: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 2.00\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .765\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 3.375\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.51\" ID\u003c\/li\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.250 Wall\u003c\/strong\u003e x 1.25\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.750\" ID x .869\" OD x .926\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/4\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 7\/8-14 x 7\/8\" bore Heims - RH Thread\u003c\/li\u003e\n\u003cli\u003e(2) 7\/8-14 x 7\/8\" bore Heims - LH Thread\u003c\/li\u003e\n\u003cli\u003e(2) RH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) LH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) RH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(2) LH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (8) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eSway bar end links\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003ePanhard bar \/ Track bar\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e3 Link \/ 4 Link\u003c\/li\u003e\n\u003cli\u003eCustom mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, rock crawler, sand rail, hot rod, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".120 Wall \/ No","offer_id":49236960313601,"sku":"6101A49","price":133.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Yes","offer_id":49236960346369,"sku":"6101B54","price":148.0,"currency_code":"USD","in_stock":false},{"title":".250 Wall \/ No","offer_id":49236960379137,"sku":"6101A54","price":133.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Yes","offer_id":49236960411905,"sku":"6101B49","price":148.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7424.jpg?v=1780802407"},{"product_id":"4-link-rod-end-kit-78-chromoly-heim-175-od-tubing","title":"7\/8 Chromoly Heim Joint 4 Link Rod End Kit for 1.75\" Tubing","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e4 Link Rod end fabrication kit complete with 7\/8 x 7\/8 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.75\" OD tubing, with wall thickness of .120 or .250. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building a custom 4 link suspension setup, radius rods and control arms for Jeeps, buggies, rock crawlers, sand rails, trucks and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003e52100 hardened bearing steel ball\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 45,051 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eThread length: 2.00\"\u003c\/li\u003e\n\u003cli\u003eBore: 7\/8\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 2.00\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .765\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 3.375\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 7\/8\"-14\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.51\" ID\u003c\/li\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.250 Wall\u003c\/strong\u003e x 1.25\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.750\" ID x .869\" OD x .926\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/4\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(4) 7\/8-14 x 7\/8\" bore Heims - RH Thread\u003c\/li\u003e\n\u003cli\u003e(4) 7\/8-14 x 7\/8\" bore Heims - LH Thread\u003c\/li\u003e\n\u003cli\u003e(4) RH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(4) LH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(4) RH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(4) LH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (16) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e3 and 4 Link Radius Rods\u003c\/li\u003e\n\u003cli\u003eWatts Links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003ePanhard bar \/ trackbar\u003c\/li\u003e\n\u003cli\u003eHi Steer\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering linkage on your 4x4, rock crawler, sand rail, hot rod, race car, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".120 Wall \/ No","offer_id":49236960674049,"sku":"6101A50","price":252.0,"currency_code":"USD","in_stock":true},{"title":".250 Wall \/ Yes","offer_id":49236960706817,"sku":"6101B55","price":267.0,"currency_code":"USD","in_stock":false},{"title":".250 Wall \/ No","offer_id":49236960739585,"sku":"6101A55","price":252.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Yes","offer_id":49236960772353,"sku":"6101B50","price":267.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7442.jpg?v=1780802449"},{"product_id":"single-joint-rod-end-34-chromoly-heim-15-od-tubing","title":"3\/4 Chromoly Heim Joint Kit – 1.5\" OD Tubing","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eSingle joint rod end kit complete with a 3\/4 x 3\/4 heat treated chromoly heim joint, jam nut, and weld in bung (tube adapter). Designed specifically for 1.5\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building custom steering and suspension links for Jeeps, buggies, trucks, 4x4s and more. Includes one heim joint, jam nut and bung. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003e52100 hardened bearing steel ball\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 28,081 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eBore: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 1.750\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .687\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 1.31\" ID\u003c\/li\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.26\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.625\" ID x .743\" OD x .922\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 5\/8\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 3\/4-16 x 3\/4 bore Heim - RH or LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e3 Link and 4 Link Radius Rods\u003c\/li\u003e\n\u003cli\u003eWatts links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003ePanhard bar \/ Track bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom linkage on your 4x4, rock crawler, sand rail, hot rod, race car, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ Left Hand Thread \/ No","offer_id":49236960870657,"sku":"6101A17","price":28.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Left Hand Thread \/ Yes","offer_id":49236960837889,"sku":"6101B17","price":35.0,"currency_code":"USD","in_stock":false},{"title":".095 Wall \/ Right Hand Thread \/ No","offer_id":49236960805121,"sku":"6101A16","price":28.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Left Hand Thread \/ No","offer_id":49236961001729,"sku":"6101A22","price":28.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Left Hand Thread \/ Yes","offer_id":49236960968961,"sku":"6101B22","price":35.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ Right Hand Thread \/ No","offer_id":49236960936193,"sku":"6101A21","price":28.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Right Hand Thread \/ Yes","offer_id":49236960903425,"sku":"6101B21","price":35.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Right Hand Thread \/ Yes","offer_id":49236961034497,"sku":"6101B16","price":35.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7095.jpg?v=1780802498"},{"product_id":"panhard-bar-rod-end-kit-34-chromoly-heim-joints-15-od-tubing","title":"3\/4 Chromoly Heim Joint Rod End Kit for 1.5\" Tubing – Panhard Bar","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003ePanhard bar rod end fabrication kit complete with 3\/4 x 3\/4 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.5\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building a custom panhard bar (trackbar), tie rods and radius arms for Jeeps, buggies, trucks, 4x4s and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 28,081 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eBore: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 1.750\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .687\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 1.31\" ID\u003c\/li\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.26\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.625\" ID x .743\" OD x .922\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 5\/8\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 3\/4-16 x 3\/4 bore Heim - RH Thread\u003c\/li\u003e\n\u003cli\u003e(1) 3\/4-16 x 3\/4 bore Heim - LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) RH Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) LH Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) RH Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(1) LH Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (4) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePanhard bar \/ Trackbar\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e3 Link \/ 4 Link\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, rock crawler, sand rail, hot rod, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ No","offer_id":49236961100033,"sku":"6101A18","price":57.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Yes","offer_id":49236961198337,"sku":"6101B18","price":68.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ No","offer_id":49236961165569,"sku":"6101A23","price":57.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Yes","offer_id":49236961132801,"sku":"6101B23","price":68.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7117.jpg?v=1780802555"},{"product_id":"sway-bar-link-rod-end-kit-34-chromoly-heim-15-od-tubing","title":"3\/4 Chromoly Heim Joint Rod End Kit for 1.5\" Tubing – Sway Bar Link","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eSway bar link rod end fabrication kit complete with 3\/4 x 3\/4 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.5\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building custom sway bar links, tie rods and radius arms for Jeeps, buggies, trucks, 4x4s and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 28,081 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eBore: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 1.750\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .687\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 1.31\" ID\u003c\/li\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.26\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.625\" ID x .743\" OD x .922\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 5\/8\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 3\/4-16 x 3\/4\" bore Heims - RH Thread\u003c\/li\u003e\n\u003cli\u003e(2) 3\/4-16 x 3\/4\" bore Heims - LH Thread\u003c\/li\u003e\n\u003cli\u003e(2) RH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) LH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) RH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(2) LH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (8) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePanhard bar \/ Trackbar\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e3 Link \/ 4 Link\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, rock crawler, sand rail, hot rod, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ No","offer_id":49236961231105,"sku":"6101A19","price":98.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Yes","offer_id":49236961329409,"sku":"6101B19","price":118.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ No","offer_id":49236961296641,"sku":"6101A24","price":98.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Yes","offer_id":49236961263873,"sku":"6101B24","price":118.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7140.jpg?v=1780802605"},{"product_id":"4-link-rod-end-kit-34-chromoly-heim-15-od-tubing","title":"3\/4 Chromoly Heim Joint 4 Link Rod End Kit for 1.5\" Tubing","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e4 Link Rod end fabrication kit complete with 3\/4 x 3\/4 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.5\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building a custom 4 link suspension setup, radius rods and control arms for Jeeps, buggies, trucks, 4x4s and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 28,081 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eBore: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 1.750\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .687\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 1.31\" ID\u003c\/li\u003e\n\u003cli\u003e1.5\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.26\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.625\" ID x .743\" OD x .922\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 5\/8\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(4) 3\/4-16 x 3\/4\" bore Heims - RH Thread\u003c\/li\u003e\n\u003cli\u003e(4) 3\/4-16 x 3\/4\" bore Heims - LH Thread\u003c\/li\u003e\n\u003cli\u003e(4) RH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(4) LH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(4) RH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(4) LH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (16) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e3 and 4 Link Radius Rods\u003c\/li\u003e\n\u003cli\u003eWatts Links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003ePanhard bar \/ trackbar\u003c\/li\u003e\n\u003cli\u003eHi Steer\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering linkage on your 4x4, rock crawler, sand rail, hot rod, race car, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ No","offer_id":49236961362177,"sku":"6101A20","price":158.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Yes","offer_id":49236961394945,"sku":"6101B25","price":178.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ No","offer_id":49236961427713,"sku":"6101A25","price":158.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Yes","offer_id":49236961460481,"sku":"6101B20","price":178.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7151.jpg?v=1780802647"},{"product_id":"single-joint-rod-end-34-chromoly-heim-175-od-tubing","title":"3\/4 Chromoly Heim Joint Kit – 1.75\" OD Tubing","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eSingle joint rod end kit complete with a 3\/4 x 3\/4 heat treated chromoly heim joint, jam nut, and weld in bung (tube adapter). Designed specifically for 1.75\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building custom steering and suspension links for Jeeps, buggies, trucks, 4x4s and more. Includes one heim joint, jam nut and bung. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003e52100 hardened bearing steel ball\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 28,081 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eBore: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 1.750\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .687\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 1.56\" ID\u003c\/li\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.51\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.625\" ID x .743\" OD x .922\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 5\/8\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 3\/4-16 x 3\/4 bore Heim - RH or LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e3 Link and 4 Link Radius Rods\u003c\/li\u003e\n\u003cli\u003eWatts links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003ePanhard bar \/ Track bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom linkage on your 4x4, rock crawler, sand rail, hot rod, race car, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ Left Hand Thread \/ No","offer_id":49236962017537,"sku":"6101A27","price":28.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Left Hand Thread \/ Yes","offer_id":49236961984769,"sku":"6101B27","price":35.0,"currency_code":"USD","in_stock":false},{"title":".095 Wall \/ Right Hand Thread \/ No","offer_id":49236961952001,"sku":"6101A26","price":28.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Left Hand Thread \/ No","offer_id":49236962148609,"sku":"6101A32","price":28.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ Left Hand Thread \/ Yes","offer_id":49236962115841,"sku":"6101B32","price":35.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ Right Hand Thread \/ No","offer_id":49236962083073,"sku":"6101A31","price":28.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Right Hand Thread \/ Yes","offer_id":49236962050305,"sku":"6101B31","price":35.0,"currency_code":"USD","in_stock":false},{"title":".095 Wall \/ Right Hand Thread \/ Yes","offer_id":49236962181377,"sku":"6101B26","price":35.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7191.jpg?v=1780802697"},{"product_id":"panhard-bar-rod-end-kit-34-chromoly-heim-joints-175-od-tubing","title":"3\/4 Chromoly Heim Joint Rod End Kit for 1.75\" Tubing – Panhard Bar","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003ePanhard bar rod end fabrication kit complete with 3\/4 x 3\/4 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.75\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building a custom panhard bar (trackbar), tie rods and radius arms for Jeeps, buggies, trucks, 4x4s and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 28,081 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eBore: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 1.750\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .687\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 1.56\" ID\u003c\/li\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.51\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.625\" ID x .743\" OD x .922\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 5\/8\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 3\/4-16 x 3\/4 bore Heim - RH Thread\u003c\/li\u003e\n\u003cli\u003e(1) 3\/4-16 x 3\/4 bore Heim - LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) RH Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) LH Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) RH Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(1) LH Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (4) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePanhard bar \/ Trackbar\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e3 Link \/ 4 Link\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, rock crawler, sand rail, hot rod, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ No","offer_id":49236964016385,"sku":"6101A28","price":57.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Yes","offer_id":49236964114689,"sku":"6101B28","price":58.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ No","offer_id":49236964081921,"sku":"6101A33","price":57.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ Yes","offer_id":49236964049153,"sku":"6101B33","price":68.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7215.jpg?v=1780802756"},{"product_id":"sway-bar-link-rod-end-kit-34-chromoly-heim-175-od-tubing","title":"3\/4 Chromoly Heim Joint Rod End Kit for 1.75\" Tubing – Sway Bar Link","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eSway bar link rod end fabrication kit complete with 3\/4 x 3\/4 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.75\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building custom sway bar links, tie rods and radius arms for Jeeps, buggies, trucks, 4x4s and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 28,081 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eBore: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 1.750\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .687\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 1.56\" ID\u003c\/li\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.51\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.625\" ID x .743\" OD x .922\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 5\/8\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 3\/4-16 x 3\/4\" bore Heims - RH Thread\u003c\/li\u003e\n\u003cli\u003e(2) 3\/4-16 x 3\/4\" bore Heims - LH Thread\u003c\/li\u003e\n\u003cli\u003e(2) RH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) LH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) RH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(2) LH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (8) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePanhard bar \/ Trackbar\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e3 Link \/ 4 Link\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, rock crawler, sand rail, hot rod, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ No","offer_id":49236964180225,"sku":"6101A29","price":98.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Yes","offer_id":49236964212993,"sku":"6101B34","price":118.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ No","offer_id":49236964245761,"sku":"6101A34","price":98.0,"currency_code":"USD","in_stock":false},{"title":".095 Wall \/ Yes","offer_id":49236964278529,"sku":"6101B29","price":118.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7237.jpg?v=1780802806"},{"product_id":"4-link-rod-end-kit-34-chromoly-heim-175-od-tubing","title":"3\/4 Chromoly Heim Joint 4 Link Rod End Kit for 1.75\" Tubing","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e4 Link Rod end fabrication kit complete with 3\/4 x 3\/4 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1.75\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building a custom 4 link suspension setup, radius rods and control arms for Jeeps, buggies, trucks, 4x4s and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 28,081 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eBore: 3\/4\"\u003c\/li\u003e\n\u003cli\u003eSocket end diameter: 1.750\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .687\"\u003c\/li\u003e\n\u003cli\u003eBall width: .875\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 3\/4\"-16\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 1.56\" ID\u003c\/li\u003e\n\u003cli\u003e1.75\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 1.51\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.625\" ID x .743\" OD x .922\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 5\/8\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.875\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(4) 3\/4-16 x 3\/4\" bore Heims - RH Thread\u003c\/li\u003e\n\u003cli\u003e(4) 3\/4-16 x 3\/4\" bore Heims - LH Thread\u003c\/li\u003e\n\u003cli\u003e(4) RH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(4) LH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(4) RH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(4) LH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (16) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e3 and 4 Link Radius Rods\u003c\/li\u003e\n\u003cli\u003eWatts Links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003ePanhard bar \/ trackbar\u003c\/li\u003e\n\u003cli\u003eHi Steer\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering linkage on your 4x4, rock crawler, sand rail, hot rod, race car, Jeep and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ No","offer_id":49236964442369,"sku":"6101A30","price":158.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Yes","offer_id":49236964540673,"sku":"6101B30","price":178.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ No","offer_id":49236964507905,"sku":"6101A35","price":158.0,"currency_code":"USD","in_stock":false},{"title":".120 Wall \/ Yes","offer_id":49236964475137,"sku":"6101B35","price":178.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7255.jpg?v=1780802849"},{"product_id":"12-rod-end-heim-joint-kit-for-1-od-tube","title":"1\/2 Chromoly Heim Joint Kit – 1\" OD Tubing","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eSingle joint rod end kit complete with a 1\/2 x 1\/2 heat treated chromoly heim joint, jam nut, and weld in bung (tube adapter). Designed specifically for 1\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building custom steering and suspension links for go karts, ATVs, UTVs, cars and more. Includes one heim joint, jam nut and bung. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 16,238 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 1\/2\"-20\u003c\/li\u003e\n\u003cli\u003eBore: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eBall end diameter: 1.312\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .500\"\u003c\/li\u003e\n\u003cli\u003eBall width: .625\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.438\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 1\/2\"-20\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 0.81\" ID\u003c\/li\u003e\n\u003cli\u003e1\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 0.76\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.375\" ID x .499\" OD x .617\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/8\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.375\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 1\/2-20 x 1\/2 bore Heim - RH or LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eCarburetor Throttle linkage\u003c\/li\u003e\n\u003cli\u003eShift links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eDrag links\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003ePanhard bar\u003c\/li\u003e\n\u003cli\u003eHi steer\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom linkage on your 4x4, sand rail, hot rod, race car, utv, ATV, go kart and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ Left Hand Thread \/ No","offer_id":49236965458177,"sku":"6101A2","price":20.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Left Hand Thread \/ Yes","offer_id":49236965425409,"sku":"6101B2","price":23.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Right Hand Thread \/ No","offer_id":49236965392641,"sku":"6101A1","price":20.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Right Hand Thread \/ Yes","offer_id":49236965622017,"sku":"6101B1","price":23.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Left Hand Thread \/ No","offer_id":49236965589249,"sku":"6101A7","price":20.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Left Hand Thread \/ Yes","offer_id":49236965556481,"sku":"6101B7","price":23.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Right Hand Thread \/ No","offer_id":49236965523713,"sku":"6101A6","price":20.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Right Hand Thread \/ Yes","offer_id":49236965490945,"sku":"6101B6","price":23.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6395.jpg?v=1780802898"},{"product_id":"12-rod-end-kit-for-1-od-tube-lht-rht-heim-joints","title":"1\/2 Chromoly Heim Joint Rod End Kit for 1\" Tubing – Panhard Bar","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003ePanhard bar rod end fabrication kit complete with 1\/2 x 1\/2 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building a custom panhard bar (trackbar), tie rods and radius arms for go karts, ATVs, UTVs, cars and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 16,238 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 1\/2\"-20\u003c\/li\u003e\n\u003cli\u003eBore: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eBall end diameter: 1.312\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .500\"\u003c\/li\u003e\n\u003cli\u003eBall width: .625\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.438\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 1\/2\"-20\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 0.81\" ID\u003c\/li\u003e\n\u003cli\u003e1\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 0.76\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.375\" ID x .499\" OD x .617\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/8\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.375\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(1) 1\/2-20 x 1\/2 Heim Joints - RH Thread\u003c\/li\u003e\n\u003cli\u003e(1) 1\/2-20 x 1\/2 Heim - LH Thread\u003c\/li\u003e\n\u003cli\u003e(1) RH Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) LH Jam Nut\u003c\/li\u003e\n\u003cli\u003e(1) RH Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(1) LH Weld in Bung (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (4) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003ePanhard bar \/ Trackbar\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie rods\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your 4x4, sand rail, hot rod, race car, utv and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ No","offer_id":49236965818625,"sku":"6101A3","price":40.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Yes","offer_id":49236965916929,"sku":"6101B3","price":48.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ No","offer_id":49236965884161,"sku":"6101A8","price":40.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Yes","offer_id":49236965851393,"sku":"6101B8","price":48.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/6410.jpg?v=1780802952"},{"product_id":"sway-bar-link-rod-end-kit-12-chromoly-heim-1-od-tubing","title":"1\/2 Chromoly Heim Joint Rod End Kit for 1\" Tubing – Sway Bar Link","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003eSway bar link rod end fabrication kit complete with 1\/2 x 1\/2 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building custom sway bar links, tie rods and radius arms for go karts, ATVs, UTVs, cars and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 16,238 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 1\/2\"-20\u003c\/li\u003e\n\u003cli\u003eBore: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eBall end diameter: 1.312\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .500\"\u003c\/li\u003e\n\u003cli\u003eBall width: .625\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.438\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 1\/2\"-20\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 0.81\" ID\u003c\/li\u003e\n\u003cli\u003e1\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 0.76\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.375\" ID x .499\" OD x .617\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/8\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.375\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(2) 1\/2-20 x 1\/2 bore Heims - RH Thread\u003c\/li\u003e\n\u003cli\u003e(2) 1\/2-20 x 1\/2 bore Heims - LH Thread\u003c\/li\u003e\n\u003cli\u003e(2) RH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) LH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(2) RH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(2) LH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (8) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003eSway bar links\u003c\/li\u003e\n\u003cli\u003eTie Rods\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003ePanhard bar \/ trackbar\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003e4 Link setups\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your go kart, sand rail, hot rod, race car, utv and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ No","offer_id":49236966211841,"sku":"6101A4","price":78.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Yes","offer_id":49236966310145,"sku":"6101B4","price":87.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ No","offer_id":49236966277377,"sku":"6101A9","price":78.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Yes","offer_id":49236966244609,"sku":"6101B9","price":87.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7070.jpg?v=1780803000"},{"product_id":"4-link-rod-end-kit-12-chromoly-heim-1-od-tubing","title":"1\/2 Chromoly Heim Joint 4 Link Rod End Kit for 1\" Tubing","description":"\u003cdiv class=\"prod-long-desc\"\u003e\n\u003cdiv class=\"product-desc-intro\"\u003e\n\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp\u003e4 Link Rod end fabrication kit complete with 1\/2 x 1\/2 heat treated chromoly heim joints, jam nuts, and weld in bungs (tube adapters). Designed specifically for 1\" OD tubing, with wall thickness of .095 or .120. Heim joints are made from 4130 Chromoly steel, with a nylon \/ teflon PTFE liner. The load rating and size make these excellent for building a custom 4 link suspension setup, radius rods and control arms for go karts, ATVs, UTVs, cars and more. Includes heim joints, jam nuts and bungs. Available with or without high misalignment spacers (HMS).\u003c\/p\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-specifications\"\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cp\u003e\u003cstrong\u003eHeim Joint:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4130 Chromoly Steel, Nylon \/ Teflon (PTFE) Liner\u003c\/li\u003e\n\u003cli\u003eStatic radial load rating: 16,238 lb\u003c\/li\u003e\n\u003cli\u003eThread pitch: Male 1\/2\"-20\u003c\/li\u003e\n\u003cli\u003eBore: 1\/2\"\u003c\/li\u003e\n\u003cli\u003eBall end diameter: 1.312\"\u003c\/li\u003e\n\u003cli\u003eSocket width: .500\"\u003c\/li\u003e\n\u003cli\u003eBall width: .625\"\u003c\/li\u003e\n\u003cli\u003eCenter line length: 2.438\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBung:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThread: Female 1\/2\"-20\u003c\/li\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eThread Length: Full length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChoose from 2 different tube sizes:\u003c\/strong\u003e\u003cul\u003e\n\u003cli\u003e1\" OD x \u003cstrong\u003e.095 Wall\u003c\/strong\u003e x 0.81\" ID\u003c\/li\u003e\n\u003cli\u003e1\" OD x \u003cstrong\u003e.120 Wall\u003c\/strong\u003e x 0.76\" ID\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eMisalignment Spacers (optional):\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: Chromoly Steel\u003c\/li\u003e\n\u003cli\u003eSurface finish: Zinc plated\u003c\/li\u003e\n\u003cli\u003e.375\" ID x .499\" OD x .617\" W\u003c\/li\u003e\n\u003cli\u003eCompatible with 3\/8\" bolt size\u003c\/li\u003e\n\u003cli\u003eTotal assembled width with HMS spacers: 1.375\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-included\"\u003e\n\u003ch3\u003eWhat's Included\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e(4) 1\/2-20 x 1\/2 bore Heims - RH Thread\u003c\/li\u003e\n\u003cli\u003e(4) 1\/2-20 x 1\/2 bore Heims - LH Thread\u003c\/li\u003e\n\u003cli\u003e(4) RH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(4) LH Jam Nuts\u003c\/li\u003e\n\u003cli\u003e(4) RH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003e(4) LH Weld in Bungs (tubing adapter)\u003c\/li\u003e\n\u003cli\u003eOptional: (16) Misalignment spacers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-desc-section product-desc-applications\"\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cdiv class=\"product-desc-section-content\"\u003e\n\u003cul\u003e\n\u003cli\u003e4 Link suspension arms\u003c\/li\u003e\n\u003cli\u003eTie Rods\u003c\/li\u003e\n\u003cli\u003eHi steer components\u003c\/li\u003e\n\u003cli\u003eRadius rods\u003c\/li\u003e\n\u003cli\u003ePanhard bar \/ trackbar\u003c\/li\u003e\n\u003cli\u003eDrag link\u003c\/li\u003e\n\u003cli\u003eControl arms\u003c\/li\u003e\n\u003cli\u003eSway bar end links\u003c\/li\u003e\n\u003cli\u003eCustom Mounts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for fabricating custom suspension and steering links on your go kart, sand rail, hot rod, race car, utv and more!\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e","brand":"50 Caliber Racing","offers":[{"title":".095 Wall \/ No","offer_id":49236966342913,"sku":"6101A5","price":118.0,"currency_code":"USD","in_stock":true},{"title":".095 Wall \/ Yes","offer_id":49236966441217,"sku":"6101B5","price":148.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ No","offer_id":49236966408449,"sku":"6101A10","price":118.0,"currency_code":"USD","in_stock":true},{"title":".120 Wall \/ Yes","offer_id":49236966375681,"sku":"6101B10","price":148.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0816\/8256\/3329\/files\/7075.jpg?v=1780803040"}],"url":"https:\/\/utvdude.com\/collections\/utv-fabrication-components.oembed?page=2","provider":"UTV Dude","version":"1.0","type":"link"}