Carry your stuff in style and comfort. Heavy gauge canvas material with 2" wide padded straps and embroidered 50 Caliber Racing logo. Multiple compartments to keep your things organized. Featuring a padded laptop compartment, and two drink holders: one on each side. Use it for school, gym, bug out bag, target shooting, travel, and more. This bag is heavy...
ScooterX Replacement Parts for Gas Scooters - Front Axle with Nuts - 10mm x 185mm (7.25")Front Axle complete with 2 nuts. 10mm diameter x 185mm (7.25") length. This will fit the Scooter-X Dirt Dog, X-Racer, and many other gas scooters on the market.
Brand new aftermarket top end kit for go karts and gas scooters equipped with Chinese made 49-52cc 2 stroke Huasheng engines. Includes all gaskets and components necessary to rebuild the top end. Manufactured to OEM spec, our kits are complete, high quality, and will extend the life of your toys for many more years of enjoyment. You can save big money and...
ScooterX replacement rear axle for gas scooters. 10mm diameter x 205mm (8") length. Includes nuts. Fits ScooterX Dirt Dog, X Racer, and many Chinese scooters such as E Scooter, Boreem, Evo, Pep Boys, Star 2 X-Treme and more.
ScooterX Clutch Bell Housing with 10mm Center Threaded Hole. This bell housing is made for stand up gas scooter transmissions which have an 10mm shaft. The inner diameter is 3 1/16" (77.5mm). This part is what your centrifugal clutch shoes grab when you apply the gas. We recommend replacing this part whenever you put new clutch shoes in. This sized is...
ScooterX Clutch Bell Housing with 8mm Center Threaded Hole. This bell housing is made for stand up gas scooter transmissions which have an 10mm shaft. The inner diameter is 3 1/16" (77.5mm). This part is what your centrifugal clutch shoes grab when you apply the gas. We recommend replacing this part whenever you put new clutch shoes in. This sized is...
The ScooterX Torque Box is a high performance exhaust. Made for 43-52cc engines it has a much larger port than the anemic stock pipe, and has no restriction plates or baffles inside. That allows the sound waves and exhaust to move with at a higher velocity. You will see a huge increase in torque and top speed with this simple bolt on exhaust.
High flow aluminum body inline fuel filter with 1/4" flanges from ScooterX. Two piece design with replaceable filter cartridge for easy maintenance while handling high fuel flow rates. Anodized finish available in four colors: Gold, Silver, Black and Red. Fits all 50 - 110cc Dirt Bikes and will also work on Go Karts, Scooters, Lawn Mowers, Pressure...
50 Caliber Racing new aftermarket replacement throttle cable. Includes cable and housing. We offer many sizes with either bent or straight ends. Replace your worn cable and get your bike back on the trail!Be sure to choose length and end style before ordering!
ScooterX Centrifugal Clutch and Chain for #35 Chain - 11 Tooth, 5/8" Bore for Go Karts, Mini Bikes, Drift Trikes, Etc. This go kart clutch fits any horizontal go kart engine with a 5/8" output shaft. Includes a 11 tooth sprocket sized for #35 chain. Commonly used on 3-5 hp go kart engines with horizontal 5/8" shaft size, made by Honda, Briggs, Lifan,...
ScooterX Centrifugal Clutch and Chain for #41 Chain - 10 Tooth, 3/4" Bore for Go Karts, Mini Bikes, Drift Trikes, Etc. This go kart clutch fits any horizontal go kart engine with a 3/4" output shaft. Includes a 10 tooth sprocket sized for #41 chain. Commonly used on 6.5 hp go kart with Honda GX160, GX200, Harbor Freight Predator, and other Chinese clone...
ScooterX Comfort Seat Kit for Chinese 33cc - 49cc Gas and Electric Scooters. This seat kit will fit on any Chinese stand up gas scooter which is equipped with a seat tube. This is one of the best upgrades you can possibly do to your scooter. No more standing up! Sit and Cruise from here on out! This Seat kit not only ads comfort to your ride but it also...
ScooterX off road super knobby tire size 300x4 (350-4). This tire fits many applications. Commonly used on stand up scooter models and is a direct replacement for ScooterX Dirt Dog, X Racer, and SkaterX. Will fit any 4 inch rim and is 10" in diameter when inflated. Includes one tire.
ScooterX replacement pneumatic tire size 3.00-8 (fits 8" rim). This tire fits many applications. Commonly used on scooters, hand trucks, lawnmowers, pressure washers, go karts, wheelbarrows, garden carts, wagons, and more. Will fit 8 inch rims. Includes one tire.
Brand new ScooterX gasket for Huasheng Chinese gas scooter engines 43-52cc. This will fit up to a 15mm intake and goes between the intake and the engine.
Brand new ScooterX gasket for Huasheng Chinese gas scooter engines. This will fit a stock 12mm up to 15mm carburetor and goes between the intake and the carburetor.
Brand new ScooterX high performance 15mm manifold for 43-52cc Huasheng Chinese gas scooter engines. This manifold will allow you to fit a 15mm carburetor for more airflow, more power, and more speed! Available as intake only, or add gaskets for a complete kit. If you also need gaskets, select the correct kit before ordering!
This kickstand is the most commonly used one on the market. It can be found on most ScooterX gas scooter models as well as many other brands. This stand will fit 99% of all Chinese stand-up scooters ever made. Constructed from durable steel with a 5 inch post, flat foot area, and retraction spring.
Brand new ScooterX transmission with 17 tooth sprocket and 8mm bell housing. Uses BFO5T chain. This is used on all ScooterX gas powered stand up scooters models, as well as many other Chinese made scooters from other manufacturers. They are found specifically on Huashueng 33-52cc gas engines. If your engine looks like the one in the photos above it will fit!
Brand new ScooterX transmission with 20 tooth sprocket and 8mm bell housing. Uses BFO5T chain. This is used on all ScooterX gas powered stand up scooters models, as well as many other Chinese made scooters from other manufacturers. They are found specifically on Huashueng 33-52cc gas engines. If your engine looks like the one in the photos above it will fit!
Brand new transmission with 25 tooth sprocket and 8mm bell housing. Uses a 25H chain. This is used on all ScooterX gas powered stand up scooters models, as well as many other Chinese made scooters from other manufacturers. They are found specifically on Huashueng 33-52cc gas engines. If your engine looks like the one in the photos above it will fit!
Brand new 16 tooth sprocket for 25H chain. This is used on all ScooterX Powerkart models, as well as many other Chinese made go karts from other manufacturers. They are found specifically on Huashueng 33-52cc gas engines. If your engine looks like the one in the photos above it should fit!
Brand New Gearbox for water cooled Pocket bikes - 6 Tooth, 25H Chain Brand new gearbox with 6 tooth sprocket for 25H chain. This is used on many water cooled pocket bikes made by many manufacturers.
Brand new ScooterX 8 tooth gearbox for 36-52cc Chinese engines. This gearbox has an 8 tooth drive sprocket that is compatible with 8mm chains. These were found on many scooters, pocket bikes, go karts, mini choppers, and more. They are commonly made in China. If your gearbox looks like the one in the photos and your chain size matches, then this will fit...