7/8" Rod End Heim Joint Kit for 1.5" OD Round Tube

50 Caliber Racing Single Joint Rod End Kit - 7/8-14 Chromoly Heim Joint with Bung for 1.5" OD Tubing

Single joint 7/8" rod end kit including heim joint, jam nut, and weld bung tube adapter Fits 1.5" OD tube with wall thick ness of .120 or .250. Heim joints are 7/8 thread x 7/8 bore, 4130 Chromoly steel with nylon / teflon PTFE liner. Excellent for building custom suspension links for trucks, sand rails, rock crawlers & more. Available with or without high misalignment spacers.

Specifications:

Heim Joints:
- 4130 Chromoly Steel, Nylon / Teflon (PTFE) Liner
- 52100 hardened bearing steel ball
- Static radial load rating: 45,051 lb
- Thread pitch: 7/8"-14
- Thread length: 2.00"
- Bore: 7/8"
- Socket end diameter: 2.00"
- Socket width: .765"
- Ball width: .875"
- Center line length: 3.375"

Bung:
- Thread: Female 7/8"-14
- Material: Chromoly Steel
- Thread Length: Full length
- Choose from 2 different tube sizes:
    1.5" OD. x .120 Wall x 1.26" ID
    1.5" OD x .250 Wall x 1.00" ID

High Misalignment Spacers (optional)
- Material: Chromoly Steel
- Surface finish: Zinc plated
- .750" ID x .869" OD x .926" W
- Compatible with 3/4" bolt size
- Total assembled width with HMS spacers: 1.875"


Perfect for fabricating custom suspension and steering links on your 4x4, rock crawler, sand rail, hot rod, Jeep and more!

- Panhard bar / Trackbar
- Drag link
- Hi steer components
- Radius rods
- Sway bar links
- Tie rods
- Control arms
- 3 Link / 4 Link
- Custom Mounts