50 Caliber Racing CNC Billet Side Intake Grille Bezels for Polaris RZR...
Polaris Primary Drive Clutch part number 1323853 (supersedes 1323769)....
Brand New Polaris OEM Factory Replacement Intercooler, Polaris Part...
50 Caliber Racing Split Bench Seat for Polaris RZR XP1k Turbo 2 and 4...
Polaris rear axle half shaft, part number 1333944. This is a Genuine OEM...
Polaris rear axle half shaft, part number 1333439. This is a Genuine OEM...
Polaris front axle half shaft, part number 1333420. This is a Genuine...
Set of 16 chrome splined tapered lug nuts. Durable and attractive chrome...
Polaris front axle half shaft, part number 1333434. This is a Genuine...
Clamp on brackets allow you to brow mount a 50 Caliber Racing 40" LED light bar on your Polaris RZR XP1000, S 900 and Turbo. USA made from 1/8" steel plating with a black powdercoat finish. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting. Purchase brackets only or as a combo with a...
This heavy duty seat mounting kit will allow you to install 50 Caliber Racing Seats in your YXZ1000R. The custom mounts bolt straight onto the vehicle's base for a secure seat install. Made with pride in the USA from 1/8" steel with black powder coat finish, this kit includes mounts for both the driver and passenger seats. **Discontinued**
Can-am factory roll cages do not have any provision for 4 point safety harnesses. The 50 Caliber Racing Roll Cage Harness Bar clamps to your factory cage, allowing you to mount safety harnesses on all 4 seats.
Can-am factory roll cages do not have any provision for 4 point safety harnesses. The 50 Caliber Racing Roll Cage Harness Bar clamps to your factory cage, allowing you to mount driver and passenger 4 point harnesses.
50 Caliber Racing roll cage harness bar for Can-Am Maverick. Clamps to your factory cage, allowing you to mount front and rear 4 point harnesses. Can-am factory roll cages do not have any provision for 4 point safety harnesses. This will make your machine much safer and more comfortable.
The 50 Caliber Racing roll cage harness bar for Can-Am Maverick MAX clamps to your factory cage, allowing you to mount front and rear 4 point harnesses. Can-am factory roll cages do not have any provision for 4 point safety harnesses. This will make your machine much safer and more comfortable.
50 Caliber Racing Harness Mount Kit for 4 Seat Can-Am Maverick 1000R MAX TURBO 2015-2017 Easy to install, includes bolt on brackets and a clamp on harness bar which provides mounting points to install front and rear 4 or 5 point harnesses in your UTV. Made in the USA from heavy duty steel plating with black powdercoat finish.
Clamp on brackets allow you to brow mount a 50 Caliber Racing 50" LED light bar on your Yamaha Viking. USA made from 1/8" steel plating with a black powdercoat finish. Uses split tube clamps to attach directly to stock factory roll cage. These brackets provide a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED...
Clamp on LED pod mounting brackets allow you to mount LED pods / rock lights in the front fender wells on your Arctic Cat Wildcat. These mounts bolt straight to the vehicle with no additional parts needed and no holes to drill. All steel construction with a matte black powder coat finish. 50 Caliber Racing is made with pride in the USA.
You won't believe how much throw these lights have! 50 Caliber Racing Elite Series Spot Beam lights were designed with deep cone optics that crank out 2 times the output of typical automotive LED light bars so these lights mean business! 34 inch - 108 watt light bar with mounting brackets to fit Yamaha YXZ1000R are included. *** CURRENTLY OUT OF STOCK ***
Protect your UTV with our heavy duty tubular steel bumper. Constructed from .095 wall steel tubing, this bumper is strong yet lightweight. Hand welded joints, and fully gusseted for awesome strength. Durable black powdercoat finish adds to the aggressive look of your YXZ1000R. Includes our premium CNC milled end caps. Bolt on design, with tabs for a 6...
50 Caliber Racing A-pillar mounting brackets allow you to mount pod or cube LED light bars on your Yamaha YXZ1000R. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powdercoated black.Available as brackets only, or as a combo...
Set of 2, 50 Caliber Racing universal clamp mount side mirrors for driver side and passenger side. Fully adjustable ball socket joint for unlimited viewing angles. Shatter proof tempered glass for safety. The clamps are universal and will fit onto any 1.75" OD round tubing. Great for UTV and sand rails. Actual mirror dimensions: 5.5″ x 9.4″ including clamps.
A spare tire is essential, especially when you are off road. This 50 Caliber Racing high strength, tubular steel tire carrier mount clamps directly to the 1.75 inch diameter roll cage cross bar above the bed on your 2 or 4 seat RZR XP1000. 100% made in the USA.
50 Caliber Racing A-pillar mounting brackets allow you to mount pod or cube LED light bars on your Polaris RZR. These mounts bolt straight to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powder coated black. Fits all RZR models, 2008 -...
Open roll cage tubes just don't look nice, and plain black caps are boring. Our CNC billet aluminum cap slips into the end of 1.75" .095 tubing, giving you a custom, finished look to your roll cage. Milled from 6061 billet aluminum and engraved with the 50 Caliber Racing logo. Made right here in the USA!Price is for one pair of end caps
Heavy duty tubular rack mount for a 50 Caliber Racing 30" straight LED light bar. Clamps directly to RZR roll cage with no modification necessary. Hand welded 1.25" steel tubing with black powdercoat finish. Provides a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting. Made in the USA! Purchase mount only or...
Heavy duty tubular rack mount for a 50 Caliber Racing 30" Curved LED light bar. Clamps directly to a RZR XP1000, S 900 & Turbo roll cage with no modification necessary. Hand welded 1.25" steel tubing with black powdercoat finish. Provides a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting. Made in the...
Heavy duty tubular rack mount for a 50 Caliber Racing 30" straight LED light bar. Clamps directly to roll cage on RZR XP1000, S 900 & Turbo with no modification necessary. Hand welded 1.25" steel tubing with black powdercoat finish. Provides a very stiff, solid mounting point at the top of your A pillars for insanely powerful LED lighting. Made in the...
Protect your Wildcat and your passengers with a 50 Caliber Racing bolt on intrusion V-bar. This burly welded steel V-bar provides extra bracing and support for the weakest area of the stock cage. V-bars stiffen your chassis, provide rollover protection and block large objects from entering through your windshield and into the passenger compartment.
Carry your stuff in style and comfort. Heavy gauge canvas material with 2" wide padded straps and embroidered 50 Caliber Racing logo. Multiple compartments to keep your things organized. Featuring a padded laptop compartment, and two drink holders: one on each side. Use it for school, gym, bug out bag, target shooting, travel, and more. This bag is heavy...
Toss your flexy, stamped stock rear plate and replace it with a 50 Caliber Racing heavy duty radius arm plate. Adds stiffness and strength to the rear suspension mounting points of your X3, resulting in a stable, predictable ride with sure footed control over whoops, jumps, high speed turns and any other extreme driving conditions. Made from 1/8 thick...
A-Pillar mounting brackets from 50 Caliber Racing allow you to mount pod or cube LED lights on your Polaris General. These mounts bolt to the cage using existing hardware. No holes to drill, and won't interfere with most windshield systems. Made with pride in the USA from 1/8" steel and powdercoated black. Available as brackets only or in a combo with 2"...
Add some serious cargo space to your RZR 4-seater with this custom roof rack system from 50 Caliber Racing. Hand welded steel 1.25" main tubes and a sheet steel floor which doubles as a full roof. Integrated LED bar and pod light tabs. Room for cooler, camping gear, tools and more! Available as roof rack only, or you can add light bar and pod lights for...