No products
New products
-
High Capacity Ball Joint Polaris RZR XP1000 Turbo RS1
Replace your worn factory part with a high capacity sealed ball joint...
$ 39.00 -
Heavy Duty Adjustable Ball Joint Polaris RZR XP1000 Turbo RS1
50 Caliber Racing Heavy Duty Adjustable Greaseable Ball Joint for...
$ 59.00 -
2018+ Turbo S Pro Race Rear Bumper
Protect your RZR with our heavy duty tubular steel bumper. Constructed...
$ 269.00 -
ScooterX Tire Size 3.00-8
ScooterX replacement pneumatic tire size 3.00-8 (fits 8" rim). This tire...
$ 32.00
Parts There are 57 products.
Subcategories
-
ScooterX Tire Size 3.00-8
ScooterX replacement pneumatic tire size 3.00-8 (fits 8" rim). This tire fits many applications. Commonly used on scooters, hand trucks, lawnmowers, pressure washers, go karts, wheelbarrows, garden carts, wagons, and more. Will fit 8 inch rims. Includes one tire.
$ 32.00 -
$ 25.00 OUT OF STOCK - BACKORDEREDGasket Kit Long Case 150cc GY6 Engine - Complete Set
This ScooterX gasket set has all the gaskets you need to rebuild your entire engine top end, bottom end, clutch, exhaust, etc. These engines are commonly used in gas scooters, go karts, dune buggies, pocket bikes, and more. This set is for long case engines with a 10 bolt belt cover (17 1/8”).
$ 25.00 -
$ 29.00 OUT OF STOCK - BACKORDEREDGo Kart Clutch - 13 Tooth - 3/4 Shaft for Number 41 Chain
This is a go kart clutch that fits a 3/4" shaft and uses a #41 size chain. The sprocket on the clutch is a 13 tooth. This is a larger sprocket than most karts come with so it will increase your top end speed if you have a smaller sprocket currently. For example if you have a 10 tooth sprocket now and your top speed is 40mph this 13 tooth sprocket would...
$ 29.00 -
$ 34.00 In stock2 Point Racing Harness Latch & Link Lap Belt
50 Caliber Racing Universal 2 Point Harness with 3" Wide Straps and quick release latching system. These are ideal for off road trucks, rock crawlers, muscle cars, street rods, rat rods, and any other type of vehicle that you want to be safe in! Available in any color you want, as long as its black.
$ 34.00 -
$ 45.00 OUT OF STOCK - BACKORDEREDPair of Rubber Rear Wheels for Razor Ground Force Go Kart
Set of 2 rubber rear wheels from 50 Caliber Racing. 4 1/2" in diameter by 2 1/2" wide, one drive wheel and one free spinning wheel. The driver's side is fixed to turn with the axle by a rectangular woodruff key. The passenger side spins freely and uses 2 bearings (Size 6900Z - not included). These are rubber road tires, NOT hard plastic drifting style...
$ 45.00 -
$ 59.00 In stock50 Caliber Racing Backpack with Harness Straps
Carry your stuff in style and comfort. Heavy gauge canvas material with 2" wide padded straps and embroidered 50 Caliber Racing logo. Multiple compartments to keep your things organized. Featuring a padded laptop compartment, and two drink holders: one on each side. Use it for school, gym, bug out bag, target shooting, travel, and more. This bag is heavy...
$ 59.00 -
$ 38.00 OUT OF STOCK - BACKORDERED11x7.10-5 Black PVC Tire Sleeve for Drift Trikes / Go Karts
ScooterX black PVC plastic tire sleeve, Designed to fit 11x7.10-5 tires commonly found on go karts and drift trikes. 1/2" thickness with traction vanes on the inner diameter surface. Very easy to install, just deflate the tire, slide new sleeve over tire and hold in position while slowly inflating tire.**Please note, this ad is for one PVC sleeve**
$ 38.00 -
$ 14.00 In stockScooter Kick Stand with 5" Leg
This kickstand is the most commonly used one on the market. It can be found on most ScooterX gas scooter models as well as many other brands. This stand will fit 99% of all Chinese stand-up scooters ever made. Constructed from durable steel with a 5 inch post, flat foot area, and retraction spring.
$ 14.00 -
$ 68.00 OUT OF STOCK - BACKORDEREDGo Kart Filter V Stack & Choke
ScooterX performance filter and velocity stack intake with choke for Sport Kart and Drift Trike. Will fits most go karts with 6.5hp OHV engines (Honda GX200 and clones). Includes cone filter, velocity stack & choke lever. Filter is 2.5” diameter and washable. Provides better filtration and more airflow for more power!
$ 68.00 -
$ 12.00 In stockRear Scooter Axle 10mm x 205mm (8") Complete with nuts
ScooterX replacement rear axle for gas scooters. 10mm diameter x 205mm (8") length. Includes nuts. Fits ScooterX Dirt Dog, X Racer, and many Chinese scooters such as E Scooter, Boreem, Evo, Pep Boys, Star 2 X-Treme and more.
$ 12.00 -
$ 33.00 In stockSuper Knobby Scooter Tire Size 300x4 - 10" Tall fits 4" Rim
ScooterX off road super knobby tire size 300x4 (350-4). This tire fits many applications. Commonly used on stand up scooter models and is a direct replacement for ScooterX Dirt Dog, X Racer, and SkaterX. Will fit any 4 inch rim and is 10" in diameter when inflated. Includes one tire.
$ 33.00 -
$ 30.00 In stockScooter Tire Size 9x3.50-4
ScooterX all terrain tire size 9x3.50-4 (9" tall, fits 3.5 - 4" wide rims). This tire fits many applications. Commonly used on stand up scooter models and is a direct replacement for ScooterX Dirt Dog, X Racer, and SkaterX. Will fit any 4 inch rim and is 9" in diameter when inflated. Includes one tire.
$ 30.00 -
$ 32.00 In stockStreet Tread Scooter Tire Size 300x4
ScooterX street tread tire size 300 x 4.This tire fits many applications. Commonly used on stand up scooter models and is a direct replacement for ScooterX Dirt Dog, X Racer, and SkaterX. Will fit any 4 inch rim and is 10" in diameter when inflated. Includes one tire.
$ 32.00 -
$ 32.00 In stockKnobby Scooter Tire Size 300x4
ScooterX off road knobby tire size 300x4 (350-4).This tire fits many applications. Commonly used on stand up scooter models and is a direct replacement for ScooterX Dirt Dog, X Racer, and SkaterX. Will fit any 4 inch rim and is 10" in diameter when inflated. Includes one tire.
$ 32.00 -
$ 49.00 OUT OF STOCK - BACKORDERED2005-2010 ScooterX Powerkart Transmission
Brand New Transmission for ScooterX Powerkart 47-52cc Go Karts 2005-2010Brand new transmission with 16 tooth, #25 sprocket. Also includes new bell housing for clutch. This was used on many ScooterX Powerkart models, and also on Bladez Powerkarts and Tanaka PaveRacer go karts. Due to the many variations in manufacturing, be sure that you verify the...
$ 49.00 -
$ 38.00 In stock10x6 Black PVC Replacement Tire Sleeve for Drift Trike
ScooterX black PVC plastic tire sleeve, 10x6" wide. Designed to fit rear wheel on ScooterX Drift Trike. May fit others as well. 1/2" thickness with traction vanes on the inner diameter surface. Very easy to install, just deflate the tire, slide new sleeve over tire and hold in position while slowly inflating tire.**Please note, this ad is for one PVC...
$ 38.00 -
$ 36.00 In stockAxle for Powerkart Go Kart
This axle is compatible with ScooterX Powerkarts 2005-2011, and also with many other 49-52cc Chinese go kart applications. If your rear axle is showing signs of wear or damage, we recommend replacing it. Ride safe!
$ 36.00 -
$ 29.00 In stockGear Box Transmission with 8mm 8 Tooth sprocket
Brand new ScooterX 8 tooth gearbox for 36-52cc Chinese engines. This gearbox has an 8 tooth drive sprocket that is compatible with 8mm chains. These were found on many scooters, pocket bikes, go karts, mini choppers, and more. They are commonly made in China. If your gearbox looks like the one in the photos and your chain size matches, then this will fit...
$ 29.00 -
$ 79.99 In stockHonda NQ50 Spree / Elite Top End Cylinder Kit
50 Caliber Racing Top End Cylinder Kit for Honda NQ50 Spree / Elite Scooters. Stock bore size replacement kit. Includes all gaskets and components necessary to rebuild your top end. Manufactured to OEM specifications. This kit is truly bolt on and can be installed by anyone with basic mechanical skills who is not afraid to turn some nuts and bolts....
$ 79.99 -
$ 14.00 In stock16T Sprocket for 25H Chain
Brand new 16 tooth sprocket for 25H chain. This is used on all ScooterX Powerkart models, as well as many other Chinese made go karts from other manufacturers. They are found specifically on Huashueng 33-52cc gas engines. If your engine looks like the one in the photos above it should fit!
$ 14.00 -
$ 45.00 In stockScooter Transmission with 25T Sprocket
Brand new transmission with 25 tooth sprocket and 8mm bell housing. Uses a 25H chain. This is used on all ScooterX gas powered stand up scooters models, as well as many other Chinese made scooters from other manufacturers. They are found specifically on Huashueng 33-52cc gas engines. If your engine looks like the one in the photos above it will fit!
$ 45.00 -
$ 45.00 In stockScooter Transmission with 20T Sprocket
Brand new ScooterX transmission with 20 tooth sprocket and 8mm bell housing. Uses BFO5T chain. This is used on all ScooterX gas powered stand up scooters models, as well as many other Chinese made scooters from other manufacturers. They are found specifically on Huashueng 33-52cc gas engines. If your engine looks like the one in the photos above it will fit!
$ 45.00 -
$ 45.00 In stockScooter Transmission with 17T Sprocket
Brand new ScooterX transmission with 17 tooth sprocket and 8mm bell housing. Uses BFO5T chain. This is used on all ScooterX gas powered stand up scooters models, as well as many other Chinese made scooters from other manufacturers. They are found specifically on Huashueng 33-52cc gas engines. If your engine looks like the one in the photos above it will fit!
$ 45.00 -
$ 15.00 In stock15mm Intake Manifold 43cc - 52cc Engine
Brand new ScooterX high performance 15mm manifold for 43-52cc Huasheng Chinese gas scooter engines. This manifold will allow you to fit a 15mm carburetor for more airflow, more power, and more speed! Available as intake only, or add gaskets for a complete kit. If you also need gaskets, select the correct kit before ordering!
$ 15.00
